* Re: linux-omap-2.6.35 on beagleboard based device hangs after booting the kernel
[not found] ` <D51DF1EE-C759-411A-AC52-7E3A61797254@mac.com>
@ 2010-08-04 5:39 ` Tony Lindgren
2010-08-04 9:15 ` Jarkko Nikula
0 siblings, 1 reply; 2+ messages in thread
From: Tony Lindgren @ 2010-08-04 5:39 UTC (permalink / raw)
To: Elvis Dowson; +Cc: linux-omap
* Elvis Dowson <elvis.dowson@mac.com> [100804 02:43]:
>
> On Aug 4, 2010, at 1:25 AM, Elvis Dowson wrote:
>
> >
> > However, after booting, the system just hangs
> >
> >
> > Starting kernel ...
> >
> > Uncompressing Linux... done, booting the kernel.
>
> I was using beagleboard_defconfig, which probably was insufficient, I should have used omap3_defconfig.
Hmm, sounds like there's something wrong with beagleboard_defconfig
then. Care to enable CONFIG_DEBUG_LL=y and CONFIG_EARLY_PRINTK=y
and add earlyprintk to kernel cmdline and see if you get any
more info why it hangs?
Tony
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: linux-omap-2.6.35 on beagleboard based device hangs after booting the kernel
2010-08-04 5:39 ` linux-omap-2.6.35 on beagleboard based device hangs after booting the kernel Tony Lindgren
@ 2010-08-04 9:15 ` Jarkko Nikula
0 siblings, 0 replies; 2+ messages in thread
From: Jarkko Nikula @ 2010-08-04 9:15 UTC (permalink / raw)
To: Tony Lindgren; +Cc: Elvis Dowson, linux-omap
On Wed, 4 Aug 2010 08:39:19 +0300
Tony Lindgren <tony@atomide.com> wrote:
> > I was using beagleboard_defconfig, which probably was insufficient, I should have used omap3_defconfig.
>
> Hmm, sounds like there's something wrong with beagleboard_defconfig
> then. Care to enable CONFIG_DEBUG_LL=y and CONFIG_EARLY_PRINTK=y
> and add earlyprintk to kernel cmdline and see if you get any
> more info why it hangs?
>
I have Beagle C2 with U-boot 2009.01-dirty and both v2.6.35 and l-o head
c287f2c5e0b80a272b9ee2032feef7366dcc1e64 boots ok with
omap3_beagle_defconfig.
Does you custom board have the same machine id than Beagle? You'll see
that also with earlyprintk if machine id from bootloader doesn't match
with board(s) support by the kernel.
--
Jarkko
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-08-04 9:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <5C6708A1-224D-49D0-90F8-E037EEE7542A@mac.com>
[not found] ` <D51DF1EE-C759-411A-AC52-7E3A61797254@mac.com>
2010-08-04 5:39 ` linux-omap-2.6.35 on beagleboard based device hangs after booting the kernel Tony Lindgren
2010-08-04 9:15 ` Jarkko Nikula
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).