* Zoom3 not booting with omap3_defconfig
@ 2010-08-09 19:01 Aguirre, Sergio
[not found] ` <49EAB745-5CB7-429F-8875-9EB349DC3803@mac.com>
2010-08-10 7:00 ` Zoom3 not booting with omap3_defconfig Tony Lindgren
0 siblings, 2 replies; 3+ messages in thread
From: Aguirre, Sergio @ 2010-08-09 19:01 UTC (permalink / raw)
To: linux-omap@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 810 bytes --]
Hi,
I'm trying to boot from NFS with my Zoom3 board with current master branch
(commit ID: 842849896627701e4c07441f2c7519aeec771058)
But, I'm not successful so far. :(
Seems that it can't detect the eth0 device. (See attached log: bad.txt)
Now, If I take omap_zoom3_defconfig from just before commit:
commit 80690ccc41f01df6edfb6684006824d8edff189e
Author: Vincent Sanders <vince@simtec.co.uk>
Date: Tue Aug 3 21:19:21 2010 +0100
Remove ARM default configurations which duplicate omap3_defconfig
I'm able to boot fine (see attached log: good.txt)
So, somehow, current omap3_defconfig doesn't seem to be as functional as
omap_zoom3_defconfig used to be...
Is there something that everybody knows, and I'm missing on how to make a
usable Zoom3 .config?
Regards,
Sergio
[-- Attachment #2: bad.txt --]
[-- Type: text/plain, Size: 13314 bytes --]
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.35-08926-g12fafbf (x0091359@dtx0091359-ubuntu-1) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #3 Mon Aug 9 12:15:41 CDT 2010
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: OMAP Zoom3 board
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3630/3730 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200n8 noinitrd mem=512M root=/dev/nfs rw nfsroot=128.247.74.241:/home/x0091359/my-nfs/busybox,nolock ip=dhcp nfsvers=3,tcp omap_vout_mod.video1_
numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 505836k/505836k available, 18452k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0048000 ( 256 kB)
[ 0.000000] .text : 0xc0048000 - 0xc0604000 (5872 kB)
[ 0.000000] .data : 0xc0630000 - 0xc0808a40 (1891 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] (null): Could not get uart4_ick
[ 0.000000] (null): Could not get uart4_fck
[ 0.000000] Reprogramming SDRC clock to 400000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] Could not get gpios_ick
[ 0.000000] Could not get gpios_fck
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3951 kB
[ 0.000000] per task-struct memory footprint: 2304 bytes
[ 0.000000] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000793] OMAP DMA hardware revision 5.0
[ 0.084228] bio: create slab <bio-0> at 0
[ 0.093078] SCSI subsystem initialized
[ 0.102752] usbcore: registered new interface driver usbfs
[ 0.104034] usbcore: registered new interface driver hub
[ 0.104949] usbcore: registered new device driver usb
[ 0.107543] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz
[ 0.118652] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.118835] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.120819] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.131835] regulator: VUSB1V5: 1500 mV normal standby
[ 0.133972] regulator: VUSB1V8: 1800 mV normal standby
[ 0.135955] regulator: VUSB3V1: 3100 mV normal standby
[ 0.140747] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.146270] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.148284] regulator: VDAC: 1800 mV normal standby
[ 0.150482] regulator: VPLL2: 1800 mV normal standby
[ 0.152893] regulator: VMMC2: 1850 mV normal standby
[ 0.155212] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.155883] i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz
[ 0.158203] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
[ 0.164245] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.167907] Bluetooth: Core ver 2.15
[ 0.168579] NET: Registered protocol family 31
[ 0.168579] Bluetooth: HCI device and connection manager initialized
[ 0.168731] Bluetooth: HCI socket layer initialized
[ 0.170837] cfg80211: Calling CRDA to update world regulatory domain
[ 0.172027] Switching to clocksource 32k_counter
[ 0.222564] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 0.228973] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.230285] NET: Registered protocol family 2
[ 0.231018] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.232879] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.233673] TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
[ 0.243804] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.243896] TCP reno registered
[ 0.243927] UDP hash table entries: 256 (order: 2, 24576 bytes)
[ 0.244262] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[ 0.245147] NET: Registered protocol family 1
[ 0.246276] RPC: Registered udp transport module.
[ 0.246307] RPC: Registered tcp transport module.
[ 0.246337] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.252258] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.424163] VFS: Disk quotas dquot_6.5.2
[ 0.424285] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.428344] JFFS2 version 2.2. (NAND) (SUMMARY) �￩ 2001-2006 Red Hat, Inc.
[ 0.429473] msgmni has been set to 987
[ 0.437561] alg: No test for stdrng (krng)
[ 0.438079] io scheduler noop registered
[ 0.438110] io scheduler deadline registered
[ 0.438323] io scheduler cfq registered (default)
[ 0.496246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.525817] serial8250.0: ttyS0 at MMIO 0x10000000 (irq = 262) is a ST16654
[ 1.141754] console [ttyS0] enabled
[ 1.182220] brd: module loaded
[ 1.202728] loop: module loaded
[ 1.215026] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.222045] omap2-nand driver initializing
[ 1.226593] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron omap2-nand.0)
[ 1.234344] NAND bus width 8 instead 16 bit
[ 1.238586] No NAND device found.
[ 1.242065] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 1.250793] Creating 7 MTD partitions on "omap2-nand.0":
[ 1.256134] 0x000000000000-0x000000080000 : "X-Loader-NAND"
[ 1.269561] 0x000000080000-0x0000001c0000 : "U-Boot-NAND"
[ 1.280548] 0x0000001c0000-0x000000200000 : "Boot Env-NAND"
[ 1.291290] 0x000000200000-0x000002000000 : "Kernel-NAND"
[ 1.316619] 0x000002000000-0x00001c000000 : "system"
[ 1.535003] 0x00001c000000-0x00001e000000 : "userdata"
[ 1.561065] 0x00001e000000-0x000020000000 : "cache"
[ 1.588165] OneNAND driver initializing
[ 1.599060] smsc911x: Driver version 2008-10-21.
[ 1.609497] smsc911x-mdio: probed
[ 1.613403] eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:01, irq=-1)
[ 1.622039] net eth0: MAC Address: 00:08:ee:03:7d:e9
[ 1.628479] usbcore: registered new interface driver asix
[ 1.634674] usbcore: registered new interface driver cdc_ether
[ 1.641265] usbcore: registered new interface driver net1080
[ 1.647521] usbcore: registered new interface driver cdc_subset
[ 1.654144] usbcore: registered new interface driver zaurus
[ 1.660675] usbcore: registered new interface driver usb8xxx
[ 1.666442] libertas_sdio: Libertas SDIO driver
[ 1.670989] libertas_sdio: Copyright Pierre Ossman
[ 1.678833] usbcore: registered new interface driver cdc_wdm
[ 1.684631] Initializing USB Mass Storage driver...
[ 1.690246] usbcore: registered new interface driver usb-storage
[ 1.696411] USB Mass Storage support registered.
[ 1.702301] usbcore: registered new interface driver libusual
[ 1.708831] usbcore: registered new interface driver usbtest
[ 1.716400] mice: PS/2 mouse device common for all mice
[ 1.724761] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0
[ 1.743438] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 1.757354] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.766754] i2c /dev entries driver
[ 1.775146] Driver for 1-wire Dallas network protocol.
[ 1.785369] Bluetooth: HCI UART driver ver 2.2
[ 1.790008] Bluetooth: HCI H4 protocol initialized
[ 1.794799] Bluetooth: HCI BCSP protocol initialized
[ 1.799835] Bluetooth: HCILL protocol initialized
[ 1.804534] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 1.811370] usbcore: registered new interface driver bcm203x
[ 1.817199] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 1.823791] usbcore: registered new interface driver bpa10x
[ 1.846527] usbcore: registered new interface driver usbhid
[ 1.852264] usbhid: USB HID core driver
[ 1.859191] usbcore: registered new interface driver snd-usb-audio
[ 1.957427] No device for DAI omap-mcbsp-dai-0
[ 1.961975] No device for DAI omap-mcbsp-dai-1
[ 1.966430] No device for DAI omap-mcbsp-dai-2
[ 1.970947] No device for DAI omap-mcbsp-dai-3
[ 1.975402] No device for DAI omap-mcbsp-dai-4
[ 1.979919] ALSA device list:
[ 1.982910] No soundcards found.
[ 1.986358] oprofile: hardware counters not available
[ 1.991394] oprofile: using timer interrupt.
[ 1.996246] TCP cubic registered
[ 1.999481] Initializing XFRM netlink socket
[ 2.003997] NET: Registered protocol family 17
[ 2.008819] NET: Registered protocol family 15
[ 2.013763] Bluetooth: L2CAP ver 2.14
[ 2.017547] Bluetooth: L2CAP socket layer initialized
[ 2.022705] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.027282] Bluetooth: SCO socket layer initialized
[ 2.032653] Bluetooth: RFCOMM TTY layer initialized
[ 2.037597] Bluetooth: RFCOMM socket layer initialized
[ 2.042816] Bluetooth: RFCOMM ver 1.11
[ 2.046569] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.051940] Bluetooth: BNEP filters: protocol multicast
[ 2.057250] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.065185] lib80211: common routines for IEEE802.11 drivers
[ 2.071014] ThumbEE CPU extension supported.
[ 2.088897] Power Management for TI OMAP3.
[ 2.145721] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 2.161041] twl_rtc twl_rtc: setting system clock to 2010-08-09 18:41:10 UTC (1281379270)
[ 2.180236] mmc1: new high speed MMC card at address 0001
[ 2.187896] mmcblk0: mmc1:0001 STM16G 14.8 GiB
[ 2.193878] mmcblk0: unknown partition table
[ 2.674468] IP-Config: Failed to open eth0
[ 2.678588] IP-Config: No network devices available.
[ 2.686096] Looking up port of RPC 100003/2 on 128.247.74.241
[ 32.766296] rpcbind: server 128.247.74.241 not responding, timed out
[ 32.773284] Root-NFS: Unable to get nfsd port number from server, using default
[ 32.780700] Looking up port of RPC 100005/1 on 128.247.74.241
[ 62.859649] rpcbind: server 128.247.74.241 not responding, timed out
[ 62.866210] Root-NFS: Unable to get mountd port number from server, using default
[ 62.874237] Root-NFS: Server returned error -101 while mounting /home/x0091359/my-nfs/busybox
[ 62.883148] VFS: Unable to mount root fs via NFS, trying floppy.
[ 62.890777] VFS: Cannot open root device "nfs" or unknown-block(2,0)
[ 62.897216] Please append a correct "root=" boot option; here are the available partitions:
[ 62.905761] 1f00 512 mtdblock0 (driver?)
[ 62.910827] 1f01 1280 mtdblock1 (driver?)
[ 62.915863] 1f02 256 mtdblock2 (driver?)
[ 62.920867] 1f03 30720 mtdblock3 (driver?)
[ 62.925933] 1f04 425984 mtdblock4 (driver?)
[ 62.930969] 1f05 32768 mtdblock5 (driver?)
[ 62.935974] 1f06 32768 mtdblock6 (driver?)
[ 62.941009] b300 15558144 mmcblk0 driver: mmcblk
[ 62.946319] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[-- Attachment #3: good.txt --]
[-- Type: text/plain, Size: 6990 bytes --]
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35-08925-ga11965e (x0091359@dtx0091359-ubuntu-1) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #2 Mon Aug 9 11:37:04 CDT 2010
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP Zoom3 board
Memory policy: ECC disabled, Data cache writeback
OMAP3630/3730 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk console=ttyS0,115200n8 noinitrd mem=512M root=/dev/nfs rw nfsroot=128.247.74.241:/home/x0091359/my-nfs/busybox,nolock ip=dhcp nfsvers=3,tcp omap_vout_mod.video1_numbuffers=6 om
ap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 515488k/515488k available, 8800k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc003b000 ( 204 kB)
.text : 0xc003b000 - 0xc03ad000 (3528 kB)
.data : 0xc03cc000 - 0xc041c7a0 ( 322 kB)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:402
Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
(null): Could not get uart4_ick
(null): Could not get uart4_fck
Reprogramming SDRC clock to 400000000 Hz
GPMC revision 5.0
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
Could not get gpios_ick
Could not get gpios_fck
OMAP GPIO hardware version 2.5
OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
OMAP DMA hardware revision 5.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz
twl4030: PIH (irq 7) chaining IRQs 368..375
twl4030: power (irq 373) chaining IRQs 376..383
twl4030: gpio (irq 368) chaining IRQs 384..401
regulator: VUSB1V5: 1500 mV normal standby
regulator: VUSB1V8: 1800 mV normal standby
regulator: VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
regulator: VDAC: 1800 mV normal standby
regulator: VPLL2: 1800 mV normal standby
regulator: VMMC2: 1850 mV normal standby
regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz
i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource 32k_counter
musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0x10000000 (irq = 262) is a ST16654
console [ttyS0] enabled
brd: module loaded
loop: module loaded
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:01, irq=-1)
net eth0: MAC Address: 00:08:ee:03:7d:e9
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
i2c /dev entries driver
Driver for 1-wire Dallas network protocol.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Power Management for TI OMAP3.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
twl_rtc twl_rtc: setting system clock to 2010-08-09 16:54:49 UTC (1281372889)
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 STM16G 14.8 GiB
mmcblk0: unknown partition table
net eth0: SMSC911x/921x identified at 0xe080c000, IRQ: 318
Sending DHCP requests ..., OK
IP-Config: Got DHCP answer from 0.0.0.0, my address is 128.247.75.216
IP-Config: Complete:
device=eth0, addr=128.247.75.216, mask=255.255.254.0, gw=128.247.74.2,
host=128.247.75.216, domain=am.dhcp.ti.com, nis-domain=(none),
bootserver=0.0.0.0, rootserver=128.247.74.241, rootpath=
Looking up port of RPC 100003/2 on 128.247.74.241
Looking up port of RPC 100005/1 on 128.247.74.241
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 204K
System initialization...
Hostname : ZOOM2
Filesystem : v1.0.0
Kernel release : Linux 2.6.35-08925-ga11965e
Kernel version : #2 Mon Aug 9 11:37:04 CDT 2010
Mounting /proc : [SUCCESS]
Mounting /sys : [SUCCESS]
Mounting /dev : [SUCCESS]
Mounting /dev/pts : [SUCCESS]
Enabling hot-plug : [SUCCESS]
Populating /dev : [SUCCESS]
Mounting other filesystems : [SUCCESS]
Starting syslogd : [SUCCESS]
Starting telnetd : [SUCCESS]
System initialization complete.
Please press Enter to activate this console.
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: Zoom3 not booting with omap3_defconfig (update: sometimes...)
[not found] ` <49EAB745-5CB7-429F-8875-9EB349DC3803@mac.com>
@ 2010-08-09 20:09 ` Aguirre, Sergio
0 siblings, 0 replies; 3+ messages in thread
From: Aguirre, Sergio @ 2010-08-09 20:09 UTC (permalink / raw)
To: Elvis Dowson; +Cc: linux-omap@vger.kernel.org
Hi,
> -----Original Message-----
> From: Elvis Dowson [mailto:elvis.dowson@mac.com]
> Sent: Monday, August 09, 2010 2:17 PM
> To: Aguirre, Sergio
> Cc: linux-omap@vger.kernel.org
> Subject: Re: Zoom3 not booting with omap3_defconfig
>
> Hi Sergio,
> I've seen the exact same thing happen, when I used
> the linux-omap v2.6.35 tag for a beagleboard based device. It gives me the
> same kernel panic.
Actually, I realized something weird...
If I have the exact same kernel, generated with omap3_defconfig, IT sometimes generates me these errors:
> [ 2.674804] IP-Config: Failed to open eth0
> [ 2.678924] IP-Config: No network devices available.
And sometimes it succeeds:
> [ 2.680389] net eth0: SMSC911x/921x identified at 0xe08da000, IRQ: 318
> [ 3.688232] Sending DHCP requests .., OK
> [ 6.469879] IP-Config: Got DHCP answer from 0.0.0.0, my address is 128.247.75.216
> [ 6.479034] IP-Config: Complete:
So, I don't know... Either I have a faulty HW, or some race condition is happening on the driver that doesn't allow to open it..
I'll try to find out why the open of eth0 fails sometimes..
Regards,
Sergio
>
> > [ 2.097320] Waiting for root device /dev/mmcblk0p2...
> > [ 2.235595] mmc0: new SD card at address b874
> > [ 2.243530] mmcblk0: mmc0:b874 SU02G 1.87 GiB (ro)
> > [ 2.250213] mmcblk0: p1 p2
> > [ 2.323638] VFS: Cannot open root device "mmcblk0p2" or unknown-
> block(179,2)
> > [ 2.330871] Please append a correct "root=" boot option; here are the
> available partitions:
> > [ 2.339477] b300 1971712 mmcblk0 driver: mmcblk
> > [ 2.344848] b301 40131 mmcblk0p1
> > [ 2.349182] b302 514080 mmcblk0p2
> > [ 2.353973] Kernel panic - not syncing: VFS: Unable to mount root fs
> on unknown-block(179,2)
>
> In my case, I found that using v2.6.35 and using the
> omap3_beagleboard_defconfig worked.
>
> This must an artifact from the defconfig clean up that happened for
> v2.6.35, breakages due to defective or untested defconfigs.
>
> Why don't you try a defconfig from a previous kernel version that works?
>
> Best regards,
>
> Elvis Dowson
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Zoom3 not booting with omap3_defconfig
2010-08-09 19:01 Zoom3 not booting with omap3_defconfig Aguirre, Sergio
[not found] ` <49EAB745-5CB7-429F-8875-9EB349DC3803@mac.com>
@ 2010-08-10 7:00 ` Tony Lindgren
1 sibling, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2010-08-10 7:00 UTC (permalink / raw)
To: Aguirre, Sergio; +Cc: linux-omap@vger.kernel.org
* Aguirre, Sergio <saaguirre@ti.com> [100809 21:54]:
> Hi,
>
> I'm trying to boot from NFS with my Zoom3 board with current master branch
> (commit ID: 842849896627701e4c07441f2c7519aeec771058)
>
> But, I'm not successful so far. :(
>
> Seems that it can't detect the eth0 device. (See attached log: bad.txt)
>
> Now, If I take omap_zoom3_defconfig from just before commit:
>
> commit 80690ccc41f01df6edfb6684006824d8edff189e
> Author: Vincent Sanders <vince@simtec.co.uk>
> Date: Tue Aug 3 21:19:21 2010 +0100
>
> Remove ARM default configurations which duplicate omap3_defconfig
>
> I'm able to boot fine (see attached log: good.txt)
>
> So, somehow, current omap3_defconfig doesn't seem to be as functional as
> omap_zoom3_defconfig used to be...
Hmm looks like the smc91x does not get detected for some reason.
> Is there something that everybody knows, and I'm missing on how to make a
> usable Zoom3 .config?
Maybe try to diff your good and bad config?
> net eth0: SMSC911x/921x identified at 0xe080c000, IRQ: 318
This line seems to be missing in your bad config. Maybe check
if there's some difference in mux settings between these two
configs?
Also, can you please try using your working config, then enable
support for omap2 and omap4 and see if that breaks it somehow?
Regards,
Tony
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-08-10 7:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-09 19:01 Zoom3 not booting with omap3_defconfig Aguirre, Sergio
[not found] ` <49EAB745-5CB7-429F-8875-9EB349DC3803@mac.com>
2010-08-09 20:09 ` Zoom3 not booting with omap3_defconfig (update: sometimes...) Aguirre, Sergio
2010-08-10 7:00 ` Zoom3 not booting with omap3_defconfig Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).