From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera Date: Thu, 23 Sep 2010 16:26:17 -0700 Message-ID: <20100923232617.GW4211@atomide.com> References: <201009110317.54899.jkrzyszt@tis.icnet.pl> <201009110327.31407.jkrzyszt@tis.icnet.pl> <20100923231415.GU4211@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:61508 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753407Ab0IWX0U (ORCPT ); Thu, 23 Sep 2010 19:26:20 -0400 Content-Disposition: inline In-Reply-To: <20100923231415.GU4211@atomide.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Janusz Krzysztofik Cc: linux-media@vger.kernel.org, Guennadi Liakhovetski , "linux-omap@vger.kernel.org" , Discussion of the Amstrad E3 emailer hardware/software * Tony Lindgren [100923 16:06]: > * Janusz Krzysztofik [100910 18:20]: > > This patch adds configuration data and initialization code required for camera > > support to the Amstrad Delta board. > > > > Three devices are declared: SoC camera, OMAP1 camera interface and OV6650 > > sensor. > > > > Default 12MHz clock has been selected for driving the sensor. Pixel clock has > > been limited to get reasonable frame rates, not exceeding the board > > capabilities. Since both devices (interface and sensor) support both pixel > > clock polarities, decision on polarity selection has been left to drivers. > > Interface GPIO line has been found not functional, thus not configured. > > > > Created and tested against linux-2.6.36-rc3. > > > > Works on top of previous patches from the series, at least 1/6, 2/6 and 3/6. > > Queuing these last two patches of the series (5/6 and 6/6) for the upcoming > merge window. BTW, these still depend on updated 2/6 to make compile happy. Tony