Re: linux-next - multi-omap image fails to boot on omap3/4

[Tony Lindgren <tony@atomide.com>]

* Anand Gadiyar <gadiyar@ti.com> [101022 06:59]:
> Tony Lindgren wrote:
> > * Gadiyar, Anand <gadiyar@ti.com> [101019 23:21]:
> 
> ...
> 
> > > >>> > >> linux-next, as of 20101019, built with the
> omap2plus_defconfig fails
> > > >>> > >> to boot on omap3 and omap4. (I've disabled CONFIG_ARCH_OMAP2
> or
> > > >>> > >> CONFIG_SWP_EMULATE to get the image to build). Building with
> only
> > > >>> > >> ARCH_OMAP3 allows the resultant image to boot up on OMAP3.
> Likewise,
> > > >>> > >> an image built with only ARCH_OMAP4 boots up on OMAP4 boards.
> > > >>> > >>
> > > >>> > >> earlyprintk does not provide any additional prints after
> > > >>> > >> "Uncompressing Linux... done, booting the kernel."
> > > >>> > >>
> > > >>> > >> Any ideas where to look?
> > > >>> > >
> 
> ...
> 
> > >
> > > I tried disabling CONFIG_SMP and CONFIG_SMP_ON_UP, and the resulting
> > > image booted up just fine.
> >
> > Looks like it's caused by this patch:
> >
> > "ARM: hotplug cpu: Keep processor information, startup code &
> > __lookup_processor_type"
> >
> > It's probably trashing registers it shouldn't. Will take a look and post
> > something to linux-arm-kernel.
> >
> 
> I'm not sure what's going on, but looks like linux-next as of
> 20101022 boots up fine on panda. I can't explain it, as I couldn't
> find anything related to the patch you mentioned.

Yeah, it's an alignment issue that's why it sometimes works depending
on the Kconfig options selected..

For rererence, posted a fix for that at:

https://patchwork.kernel.org/patch/276161/

Tony