From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Subject: BeagleBoard not resuming from uart with latest pm-core ? Date: Wed, 10 Nov 2010 16:44:14 +0100 Message-ID: <20101110164414.4529cbda@surf> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 8bit Return-path: Received: from mail.free-electrons.com ([88.190.12.23]:35988 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756240Ab0KJPoW (ORCPT ); Wed, 10 Nov 2010 10:44:22 -0500 Received: from surf (humanoidz.org [82.247.183.72]) by mail.free-electrons.com (Postfix) with ESMTPA id 4BDF511D for ; Wed, 10 Nov 2010 16:44:15 +0100 (CET) Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Hello, I've updated my tree to the last pm-core branch today (I'm at commit 42289e226ec996a13ab8a2aaef5ad9dda61ee57e), and I've built the omap2plus_defconfig with no change (except adding an initramfs). On my BeagleBoard, I enable the wakeup from UART in /sys/devices/platform/omap/omap-hsuart.2/tty/ttyO2/power/wakeup, then trigger suspend to RAM. It enters suspend to RAM, but then it doesn't wakeup when I send data through the UART. Is it a known problem, or is again a mistake on my side ? Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com