* [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds
@ 2010-11-17 15:56 Jean Pihet
2010-11-17 17:40 ` Kevin Hilman
0 siblings, 1 reply; 4+ messages in thread
From: Jean Pihet @ 2010-11-17 15:56 UTC (permalink / raw)
To: linux-omap; +Cc: Jean Pihet, Jean Pihet
From: Jean Pihet <jean.pihet@newoldbits.com>
Add comments and IDs for the following erratas:
- i540: MPU cannot exit from Standby,
- i478: Unexpected Cold-Reset is generated when device is coming
back from OFF mode
Signed-off-by: Jean Pihet <j-pihet@ti.com>
---
arch/arm/mach-omap2/irq.c | 3 ++-
arch/arm/mach-omap2/powerdomains34xx.h | 6 ++++++
2 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 32eeabe..e28b417 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -284,7 +284,8 @@ void omap3_intc_suspend(void)
void omap3_intc_prepare_idle(void)
{
- /* Disable autoidle as it can stall interrupt controller */
+ /* Disable autoidle as it can stall interrupt controller,
+ * Cf. errata ID i540 for 3430 (all revisions up to 3.1.x) */
intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
}
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index fa90486..349f2bf 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -80,6 +80,10 @@ static struct powerdomain mpu_3xxx_pwrdm = {
* 3430s upto ES3.0 and 3630ES1.0. Hence this feature
* needs to be disabled on these chips.
* Refer: 3430 errata ID i459 and 3630 errata ID i579
+ *
+ * Note: setting the SAR flag could help for errata ID i478
+ * which applies to 3430 <= ES3.1, but since the SAR feature
+ * is broken, do not use it.
*/
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
@@ -108,6 +112,8 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
+ /* Setting the SAR flag for errata ID i478 which applies
+ * to 3430 <= ES3.1 */
.flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
.banks = 2,
.pwrsts_mem_ret = {
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds
2010-11-17 15:56 Jean Pihet
@ 2010-11-17 17:40 ` Kevin Hilman
0 siblings, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2010-11-17 17:40 UTC (permalink / raw)
To: Jean Pihet; +Cc: linux-omap, Jean Pihet
Jean Pihet <jean.pihet@newoldbits.com> writes:
> From: Jean Pihet <jean.pihet@newoldbits.com>
>
> Add comments and IDs for the following erratas:
> - i540: MPU cannot exit from Standby,
> - i478: Unexpected Cold-Reset is generated when device is coming
> back from OFF mode
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
Nice, it's great to have the errata numbers in the code.
Minor comment, please fix up the multi-line comment style to follow
CodingStyle. Search for 'multi-line' in Documentation/CodingStyle.
Kevin
> ---
> arch/arm/mach-omap2/irq.c | 3 ++-
> arch/arm/mach-omap2/powerdomains34xx.h | 6 ++++++
> 2 files changed, 8 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
> index 32eeabe..e28b417 100644
> --- a/arch/arm/mach-omap2/irq.c
> +++ b/arch/arm/mach-omap2/irq.c
> @@ -284,7 +284,8 @@ void omap3_intc_suspend(void)
>
> void omap3_intc_prepare_idle(void)
> {
> - /* Disable autoidle as it can stall interrupt controller */
> + /* Disable autoidle as it can stall interrupt controller,
> + * Cf. errata ID i540 for 3430 (all revisions up to 3.1.x) */
> intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
> }
>
> diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
> index fa90486..349f2bf 100644
> --- a/arch/arm/mach-omap2/powerdomains34xx.h
> +++ b/arch/arm/mach-omap2/powerdomains34xx.h
> @@ -80,6 +80,10 @@ static struct powerdomain mpu_3xxx_pwrdm = {
> * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
> * needs to be disabled on these chips.
> * Refer: 3430 errata ID i459 and 3630 errata ID i579
> + *
> + * Note: setting the SAR flag could help for errata ID i478
> + * which applies to 3430 <= ES3.1, but since the SAR feature
> + * is broken, do not use it.
> */
> static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
> .name = "core_pwrdm",
> @@ -108,6 +112,8 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
> CHIP_GE_OMAP3630ES1_1),
> .pwrsts = PWRSTS_OFF_RET_ON,
> .pwrsts_logic_ret = PWRSTS_OFF_RET,
> + /* Setting the SAR flag for errata ID i478 which applies
> + * to 3430 <= ES3.1 */
> .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
> .banks = 2,
> .pwrsts_mem_ret = {
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds
@ 2010-11-17 17:52 Jean Pihet
2010-12-18 0:48 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Jean Pihet @ 2010-11-17 17:52 UTC (permalink / raw)
To: linux-omap; +Cc: Jean Pihet, Jean Pihet
From: Jean Pihet <jean.pihet@newoldbits.com>
Add comments and IDs for the following erratas:
- i540: MPU cannot exit from Standby,
- i478: Unexpected Cold-Reset is generated when device is coming
back from OFF mode
Signed-off-by: Jean Pihet <j-pihet@ti.com>
---
arch/arm/mach-omap2/irq.c | 5 ++++-
arch/arm/mach-omap2/powerdomains34xx.h | 8 ++++++++
2 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 32eeabe..85bf8ca 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -284,7 +284,10 @@ void omap3_intc_suspend(void)
void omap3_intc_prepare_idle(void)
{
- /* Disable autoidle as it can stall interrupt controller */
+ /*
+ * Disable autoidle as it can stall interrupt controller,
+ * cf. errata ID i540 for 3430 (all revisions up to 3.1.x)
+ */
intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
}
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index fa90486..ce5c15b 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -80,6 +80,10 @@ static struct powerdomain mpu_3xxx_pwrdm = {
* 3430s upto ES3.0 and 3630ES1.0. Hence this feature
* needs to be disabled on these chips.
* Refer: 3430 errata ID i459 and 3630 errata ID i579
+ *
+ * Note: setting the SAR flag could help for errata ID i478
+ * which applies to 3430 <= ES3.1, but since the SAR feature
+ * is broken, do not use it.
*/
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
@@ -108,6 +112,10 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
+ /*
+ * Setting the SAR flag for errata ID i478 which applies
+ * to 3430 <= ES3.1
+ */
.flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
.banks = 2,
.pwrsts_mem_ret = {
--
1.7.2.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds
2010-11-17 17:52 [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds Jean Pihet
@ 2010-12-18 0:48 ` Tony Lindgren
0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2010-12-18 0:48 UTC (permalink / raw)
To: Jean Pihet; +Cc: linux-omap, Jean Pihet
* Jean Pihet <jean.pihet@newoldbits.com> [101117 09:44]:
> From: Jean Pihet <jean.pihet@newoldbits.com>
>
> Add comments and IDs for the following erratas:
> - i540: MPU cannot exit from Standby,
> - i478: Unexpected Cold-Reset is generated when device is coming
> back from OFF mode
Applying thanks.
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-12-18 0:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-17 17:52 [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds Jean Pihet
2010-12-18 0:48 ` Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2010-11-17 15:56 Jean Pihet
2010-11-17 17:40 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).