[PATCH v2 2/2] OMAP4: add clk32kg data to omap4panda and blaze board file

[PATCH v2 2/2] OMAP4: add clk32kg data to omap4panda and blaze board file

[Balaji T K]

In Blaze and Panda, 32KHz clock - CLK32KG to WLAN is supplied
from Phoenix TWL6030.
Add CLK32KG platform data to blaze and omap4panda board file.

Signed-off-by: Balaji T K <balajitk@ti.com>
---
This patch has dependency on :-
regulator: twl: add clk32kg to twl-regulator

v2 changes:
remove CHANGE_MODE settings

 arch/arm/mach-omap2/board-4430sdp.c    |    7 +++++++
 arch/arm/mach-omap2/board-omap4panda.c |    7 +++++++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 07d1b20..99ae380 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -478,6 +478,12 @@ static struct regulator_init_data sdp4430_vusb = {
 	},
 };
 
+static struct regulator_init_data sdp4430_clk32kg = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+};
+
 static struct twl4030_platform_data sdp4430_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -493,6 +499,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 	.vaux1		= &sdp4430_vaux1,
 	.vaux2		= &sdp4430_vaux2,
 	.vaux3		= &sdp4430_vaux3,
+	.clk32kg	= &sdp4430_clk32kg,
 	.usb		= &omap4_usbphy_data
 };
 
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e944025..c86e450 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -349,6 +349,12 @@ static struct regulator_init_data omap4_panda_vusb = {
 	},
 };
 
+static struct regulator_init_data omap4_panda_clk32kg = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+};
+
 static struct twl4030_platform_data omap4_panda_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -364,6 +370,7 @@ static struct twl4030_platform_data omap4_panda_twldata = {
 	.vaux1		= &omap4_panda_vaux1,
 	.vaux2		= &omap4_panda_vaux2,
 	.vaux3		= &omap4_panda_vaux3,
+	.clk32kg	= &omap4_panda_clk32kg,
 	.usb		= &omap4_usbphy_data,
 };
 
-- 
1.7.0.4

Re: [PATCH v2 2/2] OMAP4: add clk32kg data to omap4panda and blaze board file

[Mark Brown]

On Thu, Feb 10, 2011 at 06:45:26PM +0530, Balaji T K wrote:
> In Blaze and Panda, 32KHz clock - CLK32KG to WLAN is supplied
> from Phoenix TWL6030.
> Add CLK32KG platform data to blaze and omap4panda board file.
> 
> Signed-off-by: Balaji T K <balajitk@ti.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Re: [PATCH v2 2/2] OMAP4: add clk32kg data to omap4panda and blaze board file

[Tony Lindgren]

* Mark Brown <broonie@opensource.wolfsonmicro.com> [110211 03:17]:
> On Thu, Feb 10, 2011 at 06:45:26PM +0530, Balaji T K wrote:
> > In Blaze and Panda, 32KHz clock - CLK32KG to WLAN is supplied
> > from Phoenix TWL6030.
> > Add CLK32KG platform data to blaze and omap4panda board file.
> > 
> > Signed-off-by: Balaji T K <balajitk@ti.com>
> 
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Acked-by: Tony Lindgren <tony@atomide.com>