rx51: "omapfb: no driver for display"

[Sebastian Reichel <sre@debian.org>]

[-- Attachment #1: Type: text/plain, Size: 1640 bytes --]

Hi,

I've got problems getting a working tty with the mainline 2.6.38
kernel on my Nokia N900. Here is the related output from dmesg:

$ grep -E "(omapdss|omapfb|acx565akm)" dmesg
[    0.890899] omapdss CORE: clk ick, rate 83000000
[    0.890930] omapdss CORE: clk dss1_fck, rate 96000000
[    0.890991] omapdss CORE: clk dss2_fck, rate 19200000
[    0.891021] omapdss CORE: clk tv_fck, rate 54000000
[    0.891052] omapdss CORE: clk video_fck, rate 96000000
[    0.891143] omapdss CORE: initial ctx id 0
[    0.950469] omapdss CORE: save context
[    0.950714] omapdss CORE: bus_match. dev display0/panel-acx565akm, drv panel-acx565akm
[    0.950775] omapdss CORE: driver_probe: dev display0/panel-acx565akm, drv panel-acx565akm
[    0.950805] omapdss SDI: SDI init
[    1.004455] omapdss CORE: save context
[    1.059173] omapdss CORE: save context
[    1.113830] omapdss CORE: save context
[    1.129608] acx565akm spi1.2: omapfb: acx565akm rev 8b LCD detected
[    1.130065] omapdss CORE: probe done for device display0
[    1.130096] omapdss CORE: bus_match. dev display1/venc, drv panel-acx565akm
[    1.303741] OMAPFB: omapfb_init
[    1.303894] OMAPFB: omapfb_probe
[    1.303924] omapfb omapfb: no driver for display
[    1.304016] omapfb omapfb: failed to setup omapfb

You can find the full dmesg and the full kernel config at [0] and
[1]. Can you tell me the reason for the "no driver for display"
message? I thought acx565akm has been registered as display driver
directly before.

[0] http://pkg-n900.alioth.debian.org/kernel/2.6.38/config-2.6.38-1-omap
[1] http://pkg-n900.alioth.debian.org/kernel/2.6.38/dmesg

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]