[PATCH 0/2 v2] OMAP2/3: fix the i2c,gpio reset timeouts during boot.

[PATCH 0/2 v2] OMAP2/3: fix the i2c,gpio reset timeouts during boot.

[Avinash.H.M]

Hi ,

The patches solve the reset timeouts seen in i2c and gpio modules while
booting omap2 and omap3.

version: v2
* For discussion on v1, please refer 
 	http://www.spinics.net/lists/linux-omap/msg49483.html
* changes from v1:
	- moved i2c specific things from hwmod files to i2c files.
	- fixed comments from Paul.

Baseline:
The patches are based on 
* git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
* master branch.
* v2.6.39-rc1 commit (0ce790e)

Testing:
* build tested omap2plus_defconfig for warnings and errors. none introduced.
* boot tested on 2430. 
* tested for 'core off' in suspend resume on 3430 sdp. core off counters
  increment after suspend resume. Core off works with below commands,

echo 1 > /debug/pm_debug/enable_off_mode
echo mem > /sys/power/state
cat /debug/pm_debug/count | grep ^core

Dependencies:
* need patch "OMAP2+: hwmod data: Set hwmod flags to only allow 16-bit
  accesses to i2c" from Andry Green for accessing i2c_sysc. Without this even
  with this patch, we will see i2c reset timeouts.

br ,
- Avinash

---

Avinash.H.M (2):
  OMAP2/3: hwmod: fix the i2c-reset timeout during bootup
  OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.

 arch/arm/mach-omap2/i2c.c                  |   58 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    5 ++
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    6 +++
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    7 +++
 arch/arm/plat-omap/include/plat/i2c.h      |    3 +
 5 files changed, 79 insertions(+), 0 deletions(-)

[PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup

[Avinash.H.M]

The i2c module has a special reset sequence. The sequence is
- Disable the I2C.
- Write to SOFTRESET bit.
- Enable the I2C.
- Poll on the RESETDONE bit.
This sequence must be followed for i2c reset in omap2, omap3. The sequence is
implemented as a function and the i2c_class is updated with the correct
'reset' pointer.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Avinash.H.M <avinashhm@ti.com>
---
 arch/arm/mach-omap2/i2c.c                  |   58 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    1 +
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    1 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    1 +
 arch/arm/plat-omap/include/plat/i2c.h      |    3 +
 5 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 79c478c..67c7957 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,9 +21,16 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
+#include <plat/common.h>
 
 #include "mux.h"
 
+/* In register I2C_CON, Bit 15 is the I2C enable bit */
+#define I2C_EN				BIT(15)
+#define I2C_CON_OFFSET			0x24
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+
 void __init omap2_i2c_mux_pins(int bus_id)
 {
 	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -37,3 +44,54 @@ void __init omap2_i2c_mux_pins(int bus_id)
 	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
 	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 }
+
+/**
+ * omap_i2c_reset- reset the omap i2c module.
+ * @oh: struct omap_hwmod *
+ *
+ * The i2c moudle in omap2, omap3 had a special sequence to reset. The
+ * sequence is:
+ * - Disable the I2C.
+ * - Write to SOFTRESET bit.
+ * - Enable the I2C.
+ * - Poll on the RESETDONE bit.
+ * The sequence is implemented in below function. This is called for 2420,
+ * 2430 and omap3.
+ */
+int omap_i2c_reset(struct omap_hwmod *oh)
+{
+	u32 v;
+	int c = 0;
+
+	/* Disable I2C */
+	v = omap_hwmod_read(oh, I2C_CON_OFFSET);
+	v = v & ~I2C_EN;
+	omap_hwmod_write(v, oh, I2C_CON_OFFSET);
+
+	/* Write to the SOFTRESET bit */
+	v = oh->_sysc_cache;
+	v |= (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	oh->_sysc_cache = v;
+	omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
+
+	/* Enable I2C */
+	v = omap_hwmod_read(oh, I2C_CON_OFFSET);
+	v |= I2C_EN;
+	omap_hwmod_write(v, oh, I2C_CON_OFFSET);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh,
+				oh->class->sysc->syss_offs)
+				& SYSS_RESETDONE_MASK),
+				MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			oh->name, c);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 8eb3ce1..82ff5f7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1447,6 +1447,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 static struct omap_hwmod_class i2c_class = {
 	.name		= "i2c",
 	.sysc		= &i2c_sysc,
+	.reset		= &omap_i2c_reset,
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a860fb5..ce292f0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1524,6 +1524,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 static struct omap_hwmod_class i2c_class = {
 	.name		= "i2c",
 	.sysc		= &i2c_sysc,
+	.reset		= &omap_i2c_reset,
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b98e2df..c74f972 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1460,6 +1460,7 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
 static struct omap_hwmod_class i2c_class = {
 	.name = "i2c",
 	.sysc = &i2c_sysc,
+	.reset = &omap_i2c_reset,
 };
 
 /*
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 878d632..749306f 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -22,6 +22,7 @@
 #define __ASM__ARCH_OMAP_I2C_H
 
 #include <linux/i2c.h>
+#include <plat/omap_hwmod.h>
 
 #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -52,4 +53,6 @@ struct omap_i2c_dev_attr {
 void __init omap1_i2c_mux_pins(int bus_id);
 void __init omap2_i2c_mux_pins(int bus_id);
 
+int omap_i2c_reset(struct omap_hwmod *oh);
+
 #endif /* __ASM__ARCH_OMAP_I2C_H */
-- 
1.7.1

[PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.

[Avinash.H.M]

GPIO module expects the debounce clocks to be enabled during reset. It doesn't
reset properly and timeouts are seen, if this clock isn't enabled during
reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with
which the debounce clocks are enabled during reset.

Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Avinash.H.M <avinashhm@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    4 ++++
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    5 +++++
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    6 ++++++
 3 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 82ff5f7..e0bda0a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1640,6 +1640,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1670,6 +1671,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1700,6 +1702,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1730,6 +1733,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index ce292f0..99cd7bd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1743,6 +1743,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1773,6 +1774,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1803,6 +1805,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1833,6 +1836,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1863,6 +1867,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
 	.main_clk	= "gpio5_fck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c74f972..7552b2f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2142,6 +2142,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
 	.main_clk	= "gpio1_ick",
@@ -2178,6 +2179,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
 	.main_clk	= "gpio2_ick",
@@ -2214,6 +2216,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
 	.main_clk	= "gpio3_ick",
@@ -2250,6 +2253,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
 	.main_clk	= "gpio4_ick",
@@ -2286,6 +2290,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
 	.main_clk	= "gpio5_ick",
@@ -2322,6 +2327,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
 	.main_clk	= "gpio6_ick",
-- 
1.7.1

Re: [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup

[Kevin Hilman]

"Avinash.H.M" <avinashhm@ti.com> writes:

> The i2c module has a special reset sequence. The sequence is
> - Disable the I2C.
> - Write to SOFTRESET bit.
> - Enable the I2C.
> - Poll on the RESETDONE bit.
> This sequence must be followed for i2c reset in omap2, omap3. The sequence is
> implemented as a function and the i2c_class is updated with the correct
> 'reset' pointer.
>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Kevin Hilman <khilman@ti.com>
> Signed-off-by: Avinash.H.M <avinashhm@ti.com>

[...]

> +
> +/**
> + * omap_i2c_reset- reset the omap i2c module.
> + * @oh: struct omap_hwmod *
> + *
> + * The i2c moudle in omap2, omap3 had a special sequence to reset. The
> + * sequence is:
> + * - Disable the I2C.
> + * - Write to SOFTRESET bit.
> + * - Enable the I2C.
> + * - Poll on the RESETDONE bit.
> + * The sequence is implemented in below function. This is called for 2420,
> + * 2430 and omap3.
> + */
> +int omap_i2c_reset(struct omap_hwmod *oh)
> +{
> +	u32 v;
> +	int c = 0;
> +
> +	/* Disable I2C */
> +	v = omap_hwmod_read(oh, I2C_CON_OFFSET);
> +	v = v & ~I2C_EN;
> +	omap_hwmod_write(v, oh, I2C_CON_OFFSET);
> +
> +	/* Write to the SOFTRESET bit */
> +	v = oh->_sysc_cache;
> +	v |= (0x1 << oh->class->sysc->sysc_fields->srst_shift);
> +
> +	oh->_sysc_cache = v;
> +	omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);

Direct SYSCONFIG access isn't right here.   This should go through
omap_hwmod.

What is probably needed is exposing _ocp_softreset to device code
via something like omap_hwmod_ocp_softreset() and calling that here.

Kevin

Re: [PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.

[Gulati, Shweta]

Hi,

On Tue, Apr 5, 2011 at 9:10 PM, Avinash.H.M <avinashhm@ti.com> wrote:
> GPIO module expects the debounce clocks to be enabled during reset. It doesn't
> reset properly and timeouts are seen, if this clock isn't enabled during
> reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with
> which the debounce clocks are enabled during reset.
Minor comment,
Rephrase as " GPIO module doesn't reset properly and timeouts are seen
during bootup, if
debounce clock is not enabled"
to make commit log more clear.
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Kevin Hilman <khilman@ti.com>
> Signed-off-by: Avinash.H.M <avinashhm@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_2420_data.c |    4 ++++
>  arch/arm/mach-omap2/omap_hwmod_2430_data.c |    5 +++++
>  arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    6 ++++++
>  3 files changed, 15 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> index 82ff5f7..e0bda0a 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> @@ -1640,6 +1640,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
>
>  static struct omap_hwmod omap2420_gpio1_hwmod = {
>        .name           = "gpio1",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap242x_gpio1_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap242x_gpio1_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1670,6 +1671,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
>
>  static struct omap_hwmod omap2420_gpio2_hwmod = {
>        .name           = "gpio2",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap242x_gpio2_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap242x_gpio2_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1700,6 +1702,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
>
>  static struct omap_hwmod omap2420_gpio3_hwmod = {
>        .name           = "gpio3",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap242x_gpio3_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap242x_gpio3_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1730,6 +1733,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
>
>  static struct omap_hwmod omap2420_gpio4_hwmod = {
>        .name           = "gpio4",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap242x_gpio4_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap242x_gpio4_irqs),
>        .main_clk       = "gpios_fck",
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> index ce292f0..99cd7bd 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
> @@ -1743,6 +1743,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
>
>  static struct omap_hwmod omap2430_gpio1_hwmod = {
>        .name           = "gpio1",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap243x_gpio1_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap243x_gpio1_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1773,6 +1774,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
>
>  static struct omap_hwmod omap2430_gpio2_hwmod = {
>        .name           = "gpio2",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap243x_gpio2_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap243x_gpio2_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1803,6 +1805,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
>
>  static struct omap_hwmod omap2430_gpio3_hwmod = {
>        .name           = "gpio3",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap243x_gpio3_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap243x_gpio3_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1833,6 +1836,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
>
>  static struct omap_hwmod omap2430_gpio4_hwmod = {
>        .name           = "gpio4",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap243x_gpio4_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap243x_gpio4_irqs),
>        .main_clk       = "gpios_fck",
> @@ -1863,6 +1867,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
>
>  static struct omap_hwmod omap2430_gpio5_hwmod = {
>        .name           = "gpio5",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap243x_gpio5_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap243x_gpio5_irqs),
>        .main_clk       = "gpio5_fck",
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index c74f972..7552b2f 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -2142,6 +2142,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio1_hwmod = {
>        .name           = "gpio1",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio1_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio1_irqs),
>        .main_clk       = "gpio1_ick",
> @@ -2178,6 +2179,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio2_hwmod = {
>        .name           = "gpio2",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio2_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio2_irqs),
>        .main_clk       = "gpio2_ick",
> @@ -2214,6 +2216,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio3_hwmod = {
>        .name           = "gpio3",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio3_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio3_irqs),
>        .main_clk       = "gpio3_ick",
> @@ -2250,6 +2253,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio4_hwmod = {
>        .name           = "gpio4",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio4_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio4_irqs),
>        .main_clk       = "gpio4_ick",
> @@ -2286,6 +2290,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio5_hwmod = {
>        .name           = "gpio5",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio5_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio5_irqs),
>        .main_clk       = "gpio5_ick",
> @@ -2322,6 +2327,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
>
>  static struct omap_hwmod omap3xxx_gpio6_hwmod = {
>        .name           = "gpio6",
> +       .flags          = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
>        .mpu_irqs       = omap3xxx_gpio6_irqs,
>        .mpu_irqs_cnt   = ARRAY_SIZE(omap3xxx_gpio6_irqs),
>        .main_clk       = "gpio6_ick",
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Thanks,
Regards,
Shweta
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2 v2] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup

[Mahadeva, Avinash]

[-- Attachment #1.1: Type: text/plain, Size: 2041 bytes --]

On Tue, Apr 5, 2011 at 11:57 PM, Kevin Hilman <khilman@ti.com> wrote:

> "Avinash.H.M" <avinashhm@ti.com> writes:
>
> > The i2c module has a special reset sequence. The sequence is
> > - Disable the I2C.
> > - Write to SOFTRESET bit.
> > - Enable the I2C.
> > - Poll on the RESETDONE bit.
> > This sequence must be followed for i2c reset in omap2, omap3. The
> sequence is
> > implemented as a function and the i2c_class is updated with the correct
> > 'reset' pointer.
> >
> > Cc: Rajendra Nayak <rnayak@ti.com>
> > Cc: Paul Walmsley <paul@pwsan.com>
> > Cc: Benoit Cousson <b-cousson@ti.com>
> > Cc: Kevin Hilman <khilman@ti.com>
> > Signed-off-by: Avinash.H.M <avinashhm@ti.com>
>
> [...]
>
> > +
> > +/**
> > + * omap_i2c_reset- reset the omap i2c module.
> > + * @oh: struct omap_hwmod *
> > + *
> > + * The i2c moudle in omap2, omap3 had a special sequence to reset. The
> > + * sequence is:
> > + * - Disable the I2C.
> > + * - Write to SOFTRESET bit.
> > + * - Enable the I2C.
> > + * - Poll on the RESETDONE bit.
> > + * The sequence is implemented in below function. This is called for
> 2420,
> > + * 2430 and omap3.
> > + */
> > +int omap_i2c_reset(struct omap_hwmod *oh)
> > +{
> > +     u32 v;
> > +     int c = 0;
> > +
> > +     /* Disable I2C */
> > +     v = omap_hwmod_read(oh, I2C_CON_OFFSET);
> > +     v = v & ~I2C_EN;
> > +     omap_hwmod_write(v, oh, I2C_CON_OFFSET);
> > +
> > +     /* Write to the SOFTRESET bit */
> > +     v = oh->_sysc_cache;
> > +     v |= (0x1 << oh->class->sysc->sysc_fields->srst_shift);
> > +
> > +     oh->_sysc_cache = v;
> > +     omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
>
> Direct SYSCONFIG access isn't right here.   This should go through
> omap_hwmod.
>
> What is probably needed is exposing _ocp_softreset to device code
> via something like omap_hwmod_ocp_softreset() and calling that here.
>
>
Hi Kevin ,

thanks for the review.

OK. I ll create a wrapper function ' omap_hwmod_ocp_softreset'
around '_ocp_softreset' and call it here .

b r ,
- avinash.



> Kevin
>

[-- Attachment #1.2: Type: text/html, Size: 3233 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2 v2] OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.

[Avinash.H.M.]

On Wed, Apr 06, 2011 at 11:28:00AM +0530, Gulati, Shweta wrote:
> Hi,
> 
> On Tue, Apr 5, 2011 at 9:10 PM, Avinash.H.M <avinashhm@ti.com> wrote:
> > GPIO module expects the debounce clocks to be enabled during reset. It doesn't
> > reset properly and timeouts are seen, if this clock isn't enabled during
> > reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with
> > which the debounce clocks are enabled during reset.
> Minor comment,
> Rephrase as " GPIO module doesn't reset properly and timeouts are seen
> during bootup, if
> debounce clock is not enabled"
> to make commit log more clear.


Hi Shweta ,

thanks for the review.

i will fix the rephrase the change log .

br ,

- avinash

> > Cc: Rajendra Nayak <rnayak@ti.com>
> > Cc: Paul Walmsley <paul@pwsan.com>
> > Cc: Benoit Cousson <b-cousson@ti.com>
> > Cc: Kevin Hilman <khilman@ti.com>
> > Signed-off-by: Avinash.H.M <avinashhm@ti.com>