From: Russell King - ARM Linux <linux@arm.linux.org.uk>
To: linux-arm-kernel@lists.infradead.org,
John Stultz <johnstul@us.ibm.com>,
Thomas Gleixner <tglx@linutronix.de>
Cc: Alessandro Rubini <rubini@unipv.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Eric Miao <eric.y.miao@gmail.com>,
Linus Walleij <linus.walleij@stericsson.com>,
Erik Gilling <konkers@android.com>,
Nicolas Pitre <nico@fluxnic.net>,
Tony Lindgren <tony@atomide.com>, Imre Kaloz <kaloz@openwrt.org>,
"Hans J. Koch" <hjk@hansjkoch.de>,
Sascha Hauer <kernel@pengutronix.de>,
Colin Cross <ccross@android.com>, Olof Johansson <olof@lixom.net>,
linux-omap@vger.kernel.org, Wan ZongShun <mcuos.com@gmail.com>,
Lennert Buytenhek <kernel@wantstofly.org>,
Krzysztof Halasa <khc@pm.waw.pl>
Subject: [PATCH 06/13 v2] clocksource: add common mmio clocksource
Date: Wed, 11 May 2011 09:35:52 +0100 [thread overview]
Message-ID: <20110511083552.GF15120@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <E1QJhNe-0000yh-HS@rmk-PC.arm.linux.org.uk>
Add a generic mmio clocksource, covering both 32-bit and 16-bit register
access sizes, for up or down counters. This can be used to easily
create clocksources for simple counter-based implementations.
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Colin Cross <ccross@android.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Erik Gilling <konkers@android.com>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: linux-omap@vger.kernel.org
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
This is the version with cs->reg initialized.
drivers/Kconfig | 3 ++
drivers/clocksource/Kconfig | 2 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/mmio.c | 73 ++++++++++++++++++++++++++++++++++++++++++
include/linux/clocksource.h | 8 ++++
5 files changed, 87 insertions(+), 0 deletions(-)
create mode 100644 drivers/clocksource/Kconfig
create mode 100644 drivers/clocksource/mmio.c
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d1..557a469 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -119,4 +119,7 @@ source "drivers/platform/Kconfig"
source "drivers/clk/Kconfig"
source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
endmenu
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
new file mode 100644
index 0000000..47f37b1
--- /dev/null
+++ b/drivers/clocksource/Kconfig
@@ -0,0 +1,2 @@
+config CLKSRC_MMIO
+ bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index be61ece..9b2ba29 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
+obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
new file mode 100644
index 0000000..c0e2512
--- /dev/null
+++ b/drivers/clocksource/mmio.c
@@ -0,0 +1,73 @@
+/*
+ * Generic MMIO clocksource support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+struct clocksource_mmio {
+ void __iomem *reg;
+ struct clocksource clksrc;
+};
+
+static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
+{
+ return container_of(c, struct clocksource_mmio, clksrc);
+}
+
+cycle_t clocksource_mmio_readl_up(struct clocksource *c)
+{
+ return readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readl_down(struct clocksource *c)
+{
+ return ~readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_up(struct clocksource *c)
+{
+ return readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_down(struct clocksource *c)
+{
+ return ~(unsigned)readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+/**
+ * clocksource_mmio_init - Initialize a simple mmio based clocksource
+ * @base: Virtual address of the clock readout register
+ * @name: Name of the clocksource
+ * @hz: Frequency of the clocksource in Hz
+ * @rating: Rating of the clocksource
+ * @bits: Number of valid bits
+ * @read: One of clocksource_mmio_read*() above
+ */
+int __init clocksource_mmio_init(void __iomem *base, const char *name,
+ unsigned long hz, int rating, unsigned bits,
+ cycle_t (*read)(struct clocksource *))
+{
+ struct clocksource_mmio *cs;
+
+ if (bits > 32 || bits < 16)
+ return -EINVAL;
+
+ cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+
+ cs->reg = base;
+ cs->clksrc.name = name;
+ cs->clksrc.rating = rating;
+ cs->clksrc.read = read;
+ cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
+ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&cs->clksrc, hz);
+}
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 94c1f38..a3558fd 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -341,4 +341,12 @@ static inline void update_vsyscall_tz(void)
extern void timekeeping_notify(struct clocksource *clock);
+extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
+
+extern int clocksource_mmio_init(void __iomem *, const char *,
+ unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
+
#endif /* _LINUX_CLOCKSOURCE_H */
--
1.7.4.4
next prev parent reply other threads:[~2011-05-11 8:35 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-10 7:27 [PATCH 00/13] Consolidate simple ARM MMIO clock sources Russell King - ARM Linux
2011-05-10 7:27 ` [PATCH 01/13] Make clocksource name const Russell King - ARM Linux
2011-05-10 7:28 ` [PATCH 03/13] ARM: omap1: delete useless interrupt handler Russell King - ARM Linux
2011-05-10 12:49 ` Kevin Hilman
2011-05-12 7:25 ` Tony Lindgren
2011-05-10 7:28 ` [PATCH 04/13] ARM: omap1: convert to using readl/writel instead of volatile struct Russell King - ARM Linux
2011-05-12 7:45 ` Tony Lindgren
2011-05-10 7:29 ` [PATCH 06/13] clocksource: add common mmio clocksource Russell King - ARM Linux
2011-05-10 8:38 ` Sascha Hauer
2011-05-10 8:46 ` Russell King - ARM Linux
2011-05-12 7:43 ` Tony Lindgren
2011-05-10 9:59 ` Russell King - ARM Linux
2011-05-11 8:15 ` viresh kumar
2011-05-11 8:35 ` Russell King - ARM Linux [this message]
2011-05-12 8:03 ` Thomas Gleixner
2011-05-10 7:34 ` [PATCH 13/13] clocksource: convert OMAP1 to 32-bit down counting clocksource Russell King - ARM Linux
2011-05-12 7:46 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110511083552.GF15120@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=ccross@android.com \
--cc=eric.y.miao@gmail.com \
--cc=hjk@hansjkoch.de \
--cc=johnstul@us.ibm.com \
--cc=kaloz@openwrt.org \
--cc=kernel@pengutronix.de \
--cc=kernel@wantstofly.org \
--cc=kgene.kim@samsung.com \
--cc=khc@pm.waw.pl \
--cc=konkers@android.com \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mcuos.com@gmail.com \
--cc=nico@fluxnic.net \
--cc=olof@lixom.net \
--cc=rubini@unipv.it \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).