From: Felipe Balbi <balbi@ti.com>
To: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, balbi@ti.com, gadiyar@ti.com,
sameo@linux.intel.com, parthab@india.ti.com
Subject: Re: [RESEND][PATCH 5/5] arm: omap: usb: global Suspend and resume support of ehci and ohci
Date: Wed, 18 May 2011 13:48:53 +0300 [thread overview]
Message-ID: <20110518104849.GC13908@legolas.emea.dhcp.ti.com> (raw)
In-Reply-To: <1305538755-21112-1-git-send-email-keshava_mgowda@ti.com>
[-- Attachment #1: Type: text/plain, Size: 4358 bytes --]
Hi,
On Mon, May 16, 2011 at 03:09:15PM +0530, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda@ti.com>
>
> The global suspend and resume functions for usbhs core driver
> are implemented.These routine are called when the global suspend
> and resume occurs. Before calling these functions, the
> bus suspend and resume of ehci and ohci drivers are called
> from runtime pm.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
> ---
> drivers/mfd/omap-usb-host.c | 103 +++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 103 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index bd63429..e1bc3b5 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -146,6 +146,10 @@
> #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
>
>
> +/* USBHS state bits */
> +#define OMAP_USBHS_INIT 0
> +#define OMAP_USBHS_SUSPEND 4
> +
> struct usbhs_hcd_omap {
> struct clk *xclk60mhsp1_ck;
> struct clk *xclk60mhsp2_ck;
> @@ -165,6 +169,7 @@ struct usbhs_hcd_omap {
> u32 usbhs_rev;
> spinlock_t lock;
> int count;
> + unsigned long state;
> };
> /*-------------------------------------------------------------------------*/
>
> @@ -807,6 +812,8 @@ static int usbhs_enable(struct device *dev)
> (pdata->ehci_data->reset_gpio_port[1], 1);
> }
>
> + set_bit(OMAP_USBHS_INIT, &omap->state);
> +
> end_count:
> omap->count++;
> spin_unlock_irqrestore(&omap->lock, flags);
> @@ -895,6 +902,7 @@ static void usbhs_disable(struct device *dev)
> }
>
> pm_runtime_put_sync(dev);
> + clear_bit(OMAP_USBHS_INIT, &omap->state);
>
> /* The gpio_free migh sleep; so unlock the spinlock */
> spin_unlock_irqrestore(&omap->lock, flags);
> @@ -924,10 +932,105 @@ void omap_usbhs_disable(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(omap_usbhs_disable);
>
> +#ifdef CONFIG_PM
> +
> +static int usbhs_resume(struct device *dev)
> +{
> + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> + struct usbhs_omap_platform_data *pdata = &omap->platdata;
> + unsigned long flags = 0;
> +
> + dev_dbg(dev, "Resuming TI HSUSB Controller\n");
> +
> + if (!pdata) {
> + dev_dbg(dev, "missing platform_data\n");
> + return -ENODEV;
> + }
> +
> + spin_lock_irqsave(&omap->lock, flags);
> +
> + if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
> + !test_bit(OMAP_USBHS_SUSPEND, &omap->state))
> + goto end_resume;
> +
> + pm_runtime_get_sync(dev);
> +
> + if (is_omap_usbhs_rev2(omap)) {
> + if (is_ehci_tll_mode(pdata->port_mode[0])) {
> + clk_enable(omap->usbhost_p1_fck);
> + clk_enable(omap->usbtll_p1_fck);
> + }
> + if (is_ehci_tll_mode(pdata->port_mode[1])) {
> + clk_enable(omap->usbhost_p2_fck);
> + clk_enable(omap->usbtll_p2_fck);
> + }
> + clk_enable(omap->utmi_p1_fck);
> + clk_enable(omap->utmi_p2_fck);
> + }
> + clear_bit(OMAP_USBHS_SUSPEND, &omap->state);
> +
> +end_resume:
> + spin_unlock_irqrestore(&omap->lock, flags);
> + return 0;
> +}
> +
> +
> +static int usbhs_suspend(struct device *dev)
> +{
> + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> + struct usbhs_omap_platform_data *pdata = &omap->platdata;
> + unsigned long flags = 0;
> +
> + dev_dbg(dev, "Suspending TI HSUSB Controller\n");
> +
> + if (!pdata) {
> + dev_dbg(dev, "missing platform_data\n");
> + return -ENODEV;
> + }
> +
> + spin_lock_irqsave(&omap->lock, flags);
> +
> + if (!test_bit(OMAP_USBHS_INIT, &omap->state) ||
> + test_bit(OMAP_USBHS_SUSPEND, &omap->state))
> + goto end_suspend;
> +
> + if (is_omap_usbhs_rev2(omap)) {
> + if (is_ehci_tll_mode(pdata->port_mode[0])) {
> + clk_disable(omap->usbhost_p1_fck);
> + clk_disable(omap->usbtll_p1_fck);
> + }
> + if (is_ehci_tll_mode(pdata->port_mode[1])) {
> + clk_disable(omap->usbhost_p2_fck);
> + clk_disable(omap->usbtll_p2_fck);
> + }
> + clk_disable(omap->utmi_p2_fck);
> + clk_disable(omap->utmi_p1_fck);
> + }
> +
> + set_bit(OMAP_USBHS_SUSPEND, &omap->state);
> + pm_runtime_put_sync(dev);
> +
> +end_suspend:
> + spin_unlock_irqrestore(&omap->lock, flags);
> + return 0;
> +}
> +
> +
one blank line only :-) (nitpicking, I know)
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
prev parent reply other threads:[~2011-05-18 10:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-16 9:39 [RESEND][PATCH 5/5] arm: omap: usb: global Suspend and resume support of ehci and ohci Keshava Munegowda
2011-05-18 10:48 ` Felipe Balbi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110518104849.GC13908@legolas.emea.dhcp.ti.com \
--to=balbi@ti.com \
--cc=gadiyar@ti.com \
--cc=keshava_mgowda@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=parthab@india.ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).