linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Kevin Hilman <khilman@ti.com>, linux-omap@vger.kernel.org
Subject: [PATCH 06/10] omap2+: Remove gptimer_wakeup for now
Date: Mon, 20 Jun 2011 02:23:41 -0700	[thread overview]
Message-ID: <20110620092341.357.14183.stgit@kaulin> (raw)
In-Reply-To: <20110620091754.357.56441.stgit@kaulin>

This removes the support for setting the wake-up timer for debugging.

Later on we can reserve gptimer1 for PM code only and have similar
functionality.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/pm-debug.c |   28 ----------------------------
 arch/arm/mach-omap2/pm.h       |    6 ------
 arch/arm/mach-omap2/pm34xx.c   |    4 ----
 arch/arm/mach-omap2/timer-gp.c |    8 +-------
 4 files changed, 1 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..c56d1d4 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -31,7 +31,6 @@
 #include <plat/board.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
 
 #include "cm2xxx_3xxx.h"
@@ -41,8 +40,6 @@
 int omap2_pm_debug;
 u32 enable_off_mode;
 u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
@@ -162,23 +159,6 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
 
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -576,9 +556,6 @@ static int option_set(void *data, u64 val)
 {
 	u32 *option = data;
 
-	if (option == &wakeup_timer_milliseconds && val >= 1000)
-		return -EINVAL;
-
 	*option = val;
 
 	if (option == &enable_off_mode) {
@@ -641,11 +618,6 @@ static int __init pm_dbg_init(void)
 				   &enable_off_mode, &pm_dbg_option_fops);
 	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
 				   &sleep_while_idle, &pm_dbg_option_fops);
-	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
-				   &wakeup_timer_seconds, &pm_dbg_option_fops);
-	(void) debugfs_create_file("wakeup_timer_milliseconds",
-			S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
-			&pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 45bcfce..c3a367e 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -60,19 +60,13 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
-extern u32 wakeup_timer_seconds;
-extern u32 wakeup_timer_milliseconds;
-extern struct omap_dm_timer *gptimer_wakeup;
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
-extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
 extern u32 enable_off_mode;
 extern u32 sleep_while_idle;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
-#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
 #define enable_off_mode 0
 #define sleep_while_idle 0
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d..4cb636a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -534,10 +534,6 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
-	if (wakeup_timer_seconds || wakeup_timer_milliseconds)
-		omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
-					 wakeup_timer_milliseconds);
-
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 62c0d5c..578e9df 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -72,11 +72,9 @@
 /* Clockevent code */
 
 static struct omap_dm_timer clkev;
-static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
 static u8 __initdata gptimer_id = 1;
 static u8 __initdata inited;
-struct omap_dm_timer *gptimer_wakeup;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
@@ -218,10 +216,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 
 	timer->reserved = 1;
 
-	gptimer = omap_dm_timer_request_specific(gptimer_id);
-	BUG_ON(gptimer == NULL);
-	gptimer_wakeup = gptimer;
-
 	return res;
 }
 
@@ -235,7 +229,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
 	BUG_ON(res);
 
-	omap2_gp_timer_irq.dev_id = (void *)gptimer;
+	omap2_gp_timer_irq.dev_id = (void *)&clkev;
 	setup_irq(clkev.irq, &omap2_gp_timer_irq);
 
 	__omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);


  parent reply	other threads:[~2011-06-20  9:23 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-20  9:23 [PATCH 00/10] init_early cleanup for omap init_irq and init_timer Tony Lindgren
2011-06-20  9:23 ` [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early Tony Lindgren
2011-06-20  9:54   ` Russell King - ARM Linux
2011-06-20 10:14     ` Tony Lindgren
2011-06-27 17:08   ` Kevin Hilman
2011-06-20  9:23 ` [PATCH 02/10] omap: Set separate timer init functions to avoid cpu_is_omap tests Tony Lindgren
2011-06-20  9:23 ` [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h Tony Lindgren
2011-06-20  9:56   ` Russell King - ARM Linux
2011-06-20 10:17     ` Tony Lindgren
2011-06-20  9:23 ` [PATCH 04/10] omap: Make a subset of dmtimer functions into inline functions Tony Lindgren
2011-06-20  9:23 ` [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Tony Lindgren
2011-06-23 17:07   ` Kevin Hilman
2011-06-27  7:39     ` Tony Lindgren
2011-06-20  9:23 ` Tony Lindgren [this message]
2011-06-20  9:39   ` [PATCH 06/10] omap2+: Remove gptimer_wakeup for now Santosh Shilimkar
2011-06-20  9:48     ` Tony Lindgren
2011-06-23 15:05       ` Kevin Hilman
2011-06-23 15:13         ` Santosh Shilimkar
2011-06-27  8:08           ` Tony Lindgren
2011-06-27 16:30             ` Kevin Hilman
2011-06-27 18:16               ` Tony Lindgren
2011-06-27 17:32   ` Kevin Hilman
2011-06-27 19:19     ` Tony Lindgren
2011-06-27 21:16       ` Kevin Hilman
2011-06-20  9:23 ` [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later Tony Lindgren
2011-06-23 17:01   ` Kevin Hilman
2011-06-27  7:48     ` Tony Lindgren
2011-06-27 16:41       ` Kevin Hilman
2011-06-23 17:13   ` Kevin Hilman
2011-06-27  7:51     ` Tony Lindgren
2011-06-27 10:44       ` Tony Lindgren
2011-06-20  9:23 ` [PATCH 08/10] omap2+: Use dmtimer macros for clocksource Tony Lindgren
2011-06-23 15:28   ` Kevin Hilman
2011-06-23 16:47     ` Kevin Hilman
2011-06-23 17:10   ` Kevin Hilman
2011-06-27  7:54     ` Tony Lindgren
2011-06-27 10:48       ` Tony Lindgren
2011-06-27 16:41         ` Kevin Hilman
2011-06-20  9:23 ` [PATCH 09/10] omap2+: Remove omap2_gp_clockevent_set_gptimer Tony Lindgren
2011-06-20  9:23 ` [PATCH 10/10] omap2+: Rename timer-gp.c into timer.c to combine timer init functions Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110620092341.357.14183.stgit@kaulin \
    --to=tony@atomide.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).