From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Subject: Re: [RFC/PATCH 0/4] Add support for DesignWare Core USB3 IP Date: Mon, 15 Aug 2011 18:10:25 -0700 Message-ID: <20110816011025.GB21549@kroah.com> References: <1313423845-2288-1-git-send-email-balbi@ti.com> <20110815161631.GA14830@kroah.com> <20110815184132.GE2876@legolas.emea.dhcp.ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20110815184132.GE2876-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Felipe Balbi Cc: Linux USB Mailing List , Linux OMAP Mailing List List-Id: linux-omap@vger.kernel.org On Mon, Aug 15, 2011 at 09:41:33PM +0300, Felipe Balbi wrote: > Hi, > > On Mon, Aug 15, 2011 at 09:16:31AM -0700, Greg KH wrote: > > On Mon, Aug 15, 2011 at 06:57:21PM +0300, Felipe Balbi wrote: > > > The driver is usable and we have tested many transfers > > > with g_zero and mass storage. Nevertheless, it's not > > > finished and we'd like more time to test it before > > > accepting it in mainline. Still, we think it's good > > > to show to the community the design decisions we have > > > made on the way and we'd like to hear from the rest of > > > the community any comments/criticisms wrt this driver. > > > > Why wait? I have no problems taking drivers that are barely working, or > > not quite there, if it makes development and testing by others easier. > > That's very good to hear. So, I can send you a pull request by friday if > you like ;-) Will add a patch on MAINTAINERS too so people have a > contact point. That would be fine. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html