[PATCH 05/11] arm/dts: Add initial device tree support for OMAP3 SoC

Benoit Cousson
2011-09-23T20:24:34Z

Add initial OMAP3 soc file with empty ocp bus.

Based on initial patch from Manju:
http://www.spinics.net/lists/linux-omap/msg55830.html

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: G, Manjunath Kondaiah <manjugk@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 44 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3.dtsi

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 0000000..d558785
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
--
1.7.0.4