Re: [PATCH RESEND] ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue

[Samuel Ortiz <sameo@linux.intel.com>]

Hi Keshava,

On Mon, Mar 19, 2012 at 12:12:47PM +0530, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda@ti.com>
> 
> It is observed that the echi ports of 3430 sdp board
> are not working due to the random timing of programming
> the associated GPIOs of the ULPI PHYs of the EHCI for reset.
> If the PHYs are reset at during usbhs core driver, host ports will
> not work because EHCI driver is loaded after the resetting PHYs.
> The PHYs should be in reset state while initializing the EHCI
> controller.
> The code which does the GPIO pins associated with the PHYs
> are programmed to reset is moved from the USB host core driver
> to EHCI driver.
> 
> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
> Reviewed-by: Partha Basak <parthab@india.ti.com>
Felipe, are you ok with that patch ?
I'll most likely queue it after this merge window is closed though.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/