public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: "Cousson, Benoit" <b-cousson@ti.com>
Cc: amit.kucheria@linaro.org, kbaidarov@dev.rtsoft.ru, kishon@ti.com,
	balbi@ti.com, Keerthy <j-keerthy@ti.com>,
	linux-pm@lists.linux-foundation.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields
Date: Mon, 28 May 2012 14:17:26 +0300	[thread overview]
Message-ID: <20120528111726.GD3923@besouro> (raw)
In-Reply-To: <4FBFA196.2030503@ti.com>

On Fri, May 25, 2012 at 05:13:26PM +0200, Cousson Benoit wrote:
> On 5/25/2012 10:25 AM, Eduardo Valentin wrote:
> >OMAP4460 specific temperature sensor register bit fields are added.
> >Existing OMAP4 entries are renamed to OMAP4430.
> >
> >Signed-off-by: Keerthy<j-keerthy@ti.com>
> >Signed-off-by: Eduardo Valentin<eduardo.valentin@ti.com>
> >---
> >  arch/arm/mach-omap2/include/mach/control.h |  116 ++++++++++++++++++++++++++++
> 
> Now that we do have a dedicated driver for the bandgap, I guess it
> will be better to put these defines inside the driver directly.

Agreed

> 
> Benoit
> 
> >  1 files changed, 116 insertions(+), 0 deletions(-)
> >
> >diff --git a/arch/arm/mach-omap2/include/mach/control.h b/arch/arm/mach-omap2/include/mach/control.h
> >index cf42764..171b504 100644
> >--- a/arch/arm/mach-omap2/include/mach/control.h
> >+++ b/arch/arm/mach-omap2/include/mach/control.h
> >@@ -230,6 +230,122 @@
> >  /* OMAP44xx control McBSP padconf */
> >  #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP	0x061c
> >
> >+/* TEMP_SENSOR OMAP4430 */
> >+#define OMAP4430_BGAP_TEMPSOFF_SHIFT			12
> >+#define OMAP4430_BGAP_TEMPSOFF_MASK			(1<<  12)
> >+#define OMAP4430_BGAP_TSHUT_SHIFT				11
> >+#define OMAP4430_BGAP_TSHUT_MASK				(1<<  11)
> >+#define OMAP4430_BGAP_TEMP_SENSOR_CONTCONV_SHIFT		10
> >+#define OMAP4430_BGAP_TEMP_SENSOR_CONTCONV_MASK		(1<<  10)
> >+#define OMAP4430_BGAP_TEMP_SENSOR_SOC_SHIFT		9
> >+#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK			(1<<  9)
> >+#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_SHIFT		8
> >+#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK		(1<<  8)
> >+#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
> >+#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff<<  0)
> >+
> >+/* TEMP_SENSOR OMAP4460 */
> >+#define OMAP4460_BGAP_TEMPSOFF_SHIFT			13
> >+#define OMAP4460_BGAP_TEMPSOFF_MASK			(1<<  13)
> >+#define OMAP4460_BGAP_TEMP_SENSOR_SOC_SHIFT		11
> >+#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK		(1<<  11)
> >+#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_SHIFT		10
> >+#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK		(1<<  10)
> >+#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
> >+#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff<<  0)
> >+
> >+/* BANDGAP_CTRL */
> >+#define OMAP4460_SINGLE_MODE_SHIFT			31
> >+#define OMAP4460_SINGLE_MODE_MASK			(1<<  31)
> >+#define OMAP4460_MASK_HOT_SHIFT				1
> >+#define OMAP4460_MASK_HOT_MASK				(1<<  1)
> >+#define OMAP4460_MASK_COLD_SHIFT			0
> >+#define OMAP4460_MASK_COLD_MASK				(1<<  0)
> >+
> >+/* BANDGAP_COUNTER */
> >+#define OMAP4460_COUNTER_SHIFT				0
> >+#define OMAP4460_COUNTER_MASK				(0xffffff<<  0)
> >+
> >+/* BANDGAP_THRESHOLD */
> >+#define OMAP4460_T_HOT_SHIFT				16
> >+#define OMAP4460_T_HOT_MASK				(0x3ff<<  16)
> >+#define OMAP4460_T_COLD_SHIFT				0
> >+#define OMAP4460_T_COLD_MASK				(0x3ff<<  0)
> >+
> >+/* TSHUT_THRESHOLD */
> >+#define OMAP4460_TSHUT_HOT_SHIFT			16
> >+#define OMAP4460_TSHUT_HOT_MASK				(0x3ff<<  16)
> >+#define OMAP4460_TSHUT_COLD_SHIFT			0
> >+#define OMAP4460_TSHUT_COLD_MASK			(0x3ff<<  0)
> >+
> >+/* BANDGAP_STATUS */
> >+#define OMAP4460_CLEAN_STOP_SHIFT			3
> >+#define OMAP4460_CLEAN_STOP_MASK			(1<<  3)
> >+#define OMAP4460_BGAP_ALERT_SHIFT			2
> >+#define OMAP4460_BGAP_ALERT_MASK			(1<<  2)
> >+#define OMAP4460_HOT_FLAG_SHIFT				1
> >+#define OMAP4460_HOT_FLAG_MASK				(1<<  1)
> >+#define OMAP4460_COLD_FLAG_SHIFT			0
> >+#define OMAP4460_COLD_FLAG_MASK				(1<<  0)
> >+
> >+/* TEMP_SENSOR OMAP5430 */
> >+#define OMAP5430_BGAP_TEMP_SENSOR_SOC_SHIFT		12
> >+#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK		(1<<  12)
> >+#define OMAP5430_BGAP_TEMPSOFF_SHIFT			11
> >+#define OMAP5430_BGAP_TEMPSOFF_MASK			(1<<  11)
> >+#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_SHIFT		10
> >+#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK		(1<<  10)
> >+#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
> >+#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff<<  0)
> >+
> >+/* BANDGAP_CTRL */
> >+#define OMAP5430_MASK_HOT_CORE_SHIFT			5
> >+#define OMAP5430_MASK_HOT_CORE_MASK			(1<<  5)
> >+#define OMAP5430_MASK_COLD_CORE_SHIFT			4
> >+#define OMAP5430_MASK_COLD_CORE_MASK			(1<<  4)
> >+#define OMAP5430_MASK_HOT_MM_SHIFT			3
> >+#define OMAP5430_MASK_HOT_MM_MASK			(1<<  3)
> >+#define OMAP5430_MASK_COLD_MM_SHIFT			2
> >+#define OMAP5430_MASK_COLD_MM_MASK			(1<<  2)
> >+#define OMAP5430_MASK_HOT_MPU_SHIFT			1
> >+#define OMAP5430_MASK_HOT_MPU_MASK			(1<<  1)
> >+#define OMAP5430_MASK_COLD_MPU_SHIFT			0
> >+#define OMAP5430_MASK_COLD_MPU_MASK			(1<<  0)
> >+
> >+/* BANDGAP_COUNTER */
> >+#define OMAP5430_REPEAT_MODE_SHIFT			31
> >+#define OMAP5430_REPEAT_MODE_MASK			(1<<  31)
> >+#define OMAP5430_COUNTER_SHIFT				0
> >+#define OMAP5430_COUNTER_MASK				(0xffffff<<  0)
> >+
> >+/* BANDGAP_THRESHOLD */
> >+#define OMAP5430_T_HOT_SHIFT				16
> >+#define OMAP5430_T_HOT_MASK				(0x3ff<<  16)
> >+#define OMAP5430_T_COLD_SHIFT				0
> >+#define OMAP5430_T_COLD_MASK				(0x3ff<<  0)
> >+
> >+/* TSHUT_THRESHOLD */
> >+#define OMAP5430_TSHUT_HOT_SHIFT			16
> >+#define OMAP5430_TSHUT_HOT_MASK				(0x3ff<<  16)
> >+#define OMAP5430_TSHUT_COLD_SHIFT			0
> >+#define OMAP5430_TSHUT_COLD_MASK			(0x3ff<<  0)
> >+
> >+/* BANDGAP_STATUS */
> >+#define OMAP5430_BGAP_ALERT_SHIFT			31
> >+#define OMAP5430_BGAP_ALERT_MASK			(1<<  31)
> >+#define OMAP5430_HOT_CORE_FLAG_SHIFT			5
> >+#define OMAP5430_HOT_CORE_FLAG_MASK			(1<<  5)
> >+#define OMAP5430_COLD_CORE_FLAG_SHIFT			4
> >+#define OMAP5430_COLD_CORE_FLAG_MASK			(1<<  4)
> >+#define OMAP5430_HOT_MM_FLAG_SHIFT			3
> >+#define OMAP5430_HOT_MM_FLAG_MASK			(1<<  3)
> >+#define OMAP5430_COLD_MM_FLAG_SHIFT			2
> >+#define OMAP5430_COLD_MM_FLAG_MASK			(1<<  2)
> >+#define OMAP5430_HOT_MPU_FLAG_SHIFT			1
> >+#define OMAP5430_HOT_MPU_FLAG_MASK			(1<<  1)
> >+#define OMAP5430_COLD_MPU_FLAG_SHIFT			0
> >+#define OMAP5430_COLD_MPU_FLAG_MASK			(1<<  0)
> >+
> >  /* AM35XX only CONTROL_GENERAL register offsets */
> >  #define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
> >  #define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)
> 

  reply	other threads:[~2012-05-28 11:17 UTC|newest]

Thread overview: 99+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-25  8:25 [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25  8:25 ` [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines Eduardo Valentin
2012-05-28  9:12   ` Shilimkar, Santosh
2012-05-25  8:25 ` [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area Eduardo Valentin
2012-05-28  9:25   ` Shilimkar, Santosh
2012-05-28 10:30     ` Valentin, Eduardo
2012-06-01 11:19       ` Tony Lindgren
2012-05-25  8:25 ` [RFC PATCH 03/11] arm: omap: device: create a device for system control module Eduardo Valentin
2012-05-25 12:30   ` Cousson, Benoit
2012-05-29  9:44     ` Eduardo Valentin
2012-06-14 13:50       ` Konstantin Baydarov
2012-06-15  9:22         ` Valentin, Eduardo
2012-05-29 13:39   ` Konstantin Baydarov
2012-05-25  8:25 ` [RFC PATCH 04/11] OMAP: Add early " Eduardo Valentin
2012-05-25 11:32   ` Konstantin Baydarov
2012-05-25 11:44     ` Valentin, Eduardo
2012-05-25 11:54   ` Konstantin Baydarov
2012-05-25 12:32   ` Cousson, Benoit
2012-05-28  9:58   ` Shilimkar, Santosh
2012-05-25  8:25 ` [RFC PATCH 05/11] mfd: omap: control: core system control driver Eduardo Valentin
2012-05-25 12:52   ` Cousson, Benoit
2012-05-28 11:35     ` Eduardo Valentin
2012-05-29 13:25       ` Cousson, Benoit
2012-06-01 11:29         ` Tony Lindgren
2012-06-01 12:30           ` Shilimkar, Santosh
2012-06-01 12:43             ` Cousson, Benoit
2012-06-01 17:19               ` Eduardo Valentin
2012-06-01 13:40           ` Konstantin Baydarov
2012-06-01 14:13             ` Tony Lindgren
2012-06-01 14:26               ` Konstantin Baydarov
2012-05-28  9:54   ` Shilimkar, Santosh
2012-05-28 11:42     ` Eduardo Valentin
2012-05-28 13:15       ` Shilimkar, Santosh
2012-05-29 13:31         ` Cousson, Benoit
2012-05-25  8:25 ` [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type Eduardo Valentin
2012-05-25 12:53   ` Cousson, Benoit
2012-05-28 10:02     ` Shilimkar, Santosh
2012-05-28 11:24       ` Eduardo Valentin
2012-06-01 11:35         ` Tony Lindgren
2012-05-25  8:25 ` [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Eduardo Valentin
2012-05-25 13:35   ` Shubhrajyoti Datta
2012-05-25 15:06   ` Cousson, Benoit
2012-06-01 11:38   ` Tony Lindgren
2012-06-01 13:20     ` [linux-pm] " Tony Lindgren
2012-06-01 14:07       ` Kevin Hilman
2012-06-01 14:15         ` Tony Lindgren
2012-05-25  8:25 ` [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Eduardo Valentin
2012-05-25 15:13   ` Cousson, Benoit
2012-05-28 11:17     ` Eduardo Valentin [this message]
2012-05-28 10:04   ` Shilimkar, Santosh
2012-05-28 11:18     ` Eduardo Valentin
2012-05-25  8:25 ` [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Eduardo Valentin
2012-05-25 15:49   ` Cousson, Benoit
2012-05-28 11:06     ` Eduardo Valentin
2012-05-28 11:16     ` Eduardo Valentin
2012-05-29 13:14       ` Cousson, Benoit
2012-05-29 17:51         ` Mike Turquette
2012-05-25 16:39   ` Konstantin Baydarov
2012-05-28 10:55     ` Eduardo Valentin
2012-06-01 11:42   ` Tony Lindgren
2012-05-25  8:26 ` [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone Eduardo Valentin
2012-05-28  9:33   ` Shilimkar, Santosh
2012-05-28  9:48     ` Felipe Balbi
2012-05-28 10:26       ` Valentin, Eduardo
2012-05-29 12:54         ` Cousson, Benoit
2012-05-25  8:26 ` [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4 Eduardo Valentin
2012-05-29  9:49   ` Konstantin Baydarov
2012-05-30  8:38     ` Cousson, Benoit
2012-05-30  9:05       ` Konstantin Baydarov
2012-05-30  9:26         ` Cousson, Benoit
2012-05-30 10:17           ` Konstantin Baydarov
2012-05-30 10:22             ` Cousson, Benoit
2012-05-30 10:42               ` Eduardo Valentin
2012-05-30 12:16                 ` Cousson, Benoit
2012-05-31 12:06           ` Konstantin Baydarov
2012-05-31 12:49             ` Eduardo Valentin
2012-05-31 12:52               ` Cousson, Benoit
2012-05-31 14:51                 ` Konstantin Baydarov
2012-05-25  8:35 ` [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 10:50 ` Konstantin Baydarov
2012-05-25 11:11   ` Valentin, Eduardo
2012-05-25 12:21     ` Konstantin Baydarov
2012-06-01  0:12 ` [linux-pm] " Kevin Hilman
2012-06-18 11:32 ` [RFC PATCH v2 01/11] ARM: OMAP4: Remove un-used control module headers and defines Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area Konstantin Baydarov
2012-06-20 10:17   ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 03/11] mfd: omap: control: core system control driver Konstantin Baydarov
2012-06-20 10:22   ` Tony Lindgren
2012-06-20 14:13     ` Konstantin Baydarov
2012-06-26 11:17       ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type Konstantin Baydarov
2012-06-20 10:24   ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 05/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Konstantin Baydarov
2012-06-20 10:25   ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 07/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 08/11] omap4: thermal: add basic CPU thermal zone Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4 Konstantin Baydarov
2012-06-18 12:13   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120528111726.GD3923@besouro \
    --to=eduardo.valentin@ti.com \
    --cc=amit.kucheria@linaro.org \
    --cc=b-cousson@ti.com \
    --cc=balbi@ti.com \
    --cc=j-keerthy@ti.com \
    --cc=kbaidarov@dev.rtsoft.ru \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox