latest kernel for am35xx

latest kernel for am35xx

[Maxim Podbereznyy]

Hi!

I need to use the latest kernel at a am3517 based board where
Craneboard schematic was used as a reference. In addition to Cranboard
scheme I have wl1271 chip added and therefore I need a kernel - one of
the latests to support wireless feature.

The job I did:
1) used kernel from Craneboard (Mistral repository) - 2.6.32, no wl1271 support
2) OMAPPSP_04.02.00.07 - 2.6.37, tps65910 driver is broken
3) AM335x PSP 04.06.00.07 - does not compile for am3517evm

Can anybody suggest some alive kernel tree where tps65910 and wl1271
chips are supported? Having am3517evm or am3517crane board files would
be a great help!

Thanks in advance!
Max

Re: latest kernel for am35xx

[Maxim Podbereznyy]

Hi!

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git
Does anyone knows a working branch/tag for am3517evm? I need the board
boots fine with Ethernet enabled and working.

I read a few messages at e2e forum and all of them report about broken
features.. I need wl1271 support in the kernel therefore I have to use
on the latest kernels.

2012/5/30 Anil Kumar <anilkumar880@gmail.com>:
> Hi Lisarden,
>
> Please try this.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>
> Thanks,
> Anil
>
> On Wed, May 30, 2012 at 2:21 PM, Maxim Podbereznyy <lisarden@gmail.com>
> wrote:
>>
>> Hi!
>>
>> I need to use the latest kernel at a am3517 based board where
>> Craneboard schematic was used as a reference. In addition to Cranboard
>> scheme I have wl1271 chip added and therefore I need a kernel - one of
>> the latests to support wireless feature.
>>
>> The job I did:
>> 1) used kernel from Craneboard (Mistral repository) - 2.6.32, no wl1271
>> support
>> 2) OMAPPSP_04.02.00.07 - 2.6.37, tps65910 driver is broken
>> 3) AM335x PSP 04.06.00.07 - does not compile for am3517evm
>>
>> Can anybody suggest some alive kernel tree where tps65910 and wl1271
>> chips are supported? Having am3517evm or am3517crane board files would
>> be a great help!
>>
>> Thanks in advance!
>> Max
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: latest kernel for am35xx

[Yegor Yefremov]

Hi Maxim,

> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git
> Does anyone knows a working branch/tag for am3517evm? I need the board
> boots fine with Ethernet enabled and working.
> 
> I read a few messages at e2e forum and all of them report about broken
> features.. I need wl1271 support in the kernel therefore I have to use
> on the latest kernels.

my best choice was 3.3-rc7 so far. With final 3.3 frame buffer made problems. wl1271 was working like a charm. I have another PMIC, so I don't know if it works well with tps65910.

I just took the master branch of linux-omap.git

Best regards,
Yegor

Re: latest kernel for am35xx

[Ladislav Michl]

On Thu, May 31, 2012 at 11:02:06AM +0200, Yegor Yefremov wrote:
> my best choice was 3.3-rc7 so far. With final 3.3 frame buffer made problems. wl1271 was working like a charm. I have another PMIC, so I don't know if it works well with tps65910.
> 
> I just took the master branch of linux-omap.git

Yegor,

does USB work for you? I forward ported support for TechNexion's TAM-3517 on
Twister board to current master, but so far no luck with mass storage
support (patch for reference http://ladislav.michl.sweb.cz/tam3517.patch).
It does not detect any plugged in devices.

USB related errors:
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
------------[ cut here ]------------
WARNING: at arch/arm/mach-omap2/pm.c:48 _init_omap_device+0x74/0x94()
_init_omap_device: could not find omap_hwmod for iva
Modules linked in:
[<c0012838>] (unwind_backtrace+0x0/0xec) from [<c0028e9c>] (warn_slowpath_common+0x4c/0x64)
[<c0028e9c>] (warn_slowpath_common+0x4c/0x64) from [<c0028f48>] (warn_slowpath_fmt+0x30/0x40)
[<c0028f48>] (warn_slowpath_fmt+0x30/0x40) from [<c03fcca8>] (_init_omap_device+0x74/0x94)
[<c03fcca8>] (_init_omap_device+0x74/0x94) from [<c03fcd00>] (omap2_common_pm_init+0x38/0x64)
[<c03fcd00>] (omap2_common_pm_init+0x38/0x64) from [<c0008660>] (do_one_initcall+0x94/0x15c)
[<c0008660>] (do_one_initcall+0x94/0x15c) from [<c03f62fc>] (kernel_init+0xd4/0x1ac)
[<c03f62fc>] (kernel_init+0xd4/0x1ac) from [<c000e654>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1b75b31a2719ed1c ]---
[...]
------------[ cut here ]------------
WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:161 omap3_l3_app_irq+0x210/0x2a0()
In-band Error seen by USB_OTG  at address 0
Modules linked in:
[<c0012838>] (unwind_backtrace+0x0/0xec) from [<c0028e9c>] (warn_slowpath_common+0x4c/0x64)
[<c0028e9c>] (warn_slowpath_common+0x4c/0x64) from [<c0028f48>] (warn_slowpath_fmt+0x30/0x40)
[<c0028f48>] (warn_slowpath_fmt+0x30/0x40) from [<c0021118>] (omap3_l3_app_irq+0x210/0x2a0)
[<c0021118>] (omap3_l3_app_irq+0x210/0x2a0) from [<c005f06c>] (handle_irq_event_percpu+0x34/0x194)
[<c005f06c>] (handle_irq_event_percpu+0x34/0x194) from [<c005f1f4>] (handle_irq_event+0x28/0x38)
[<c005f1f4>] (handle_irq_event+0x28/0x38) from [<c00615e4>] (handle_level_irq+0xb8/0xe8)
[<c00615e4>] (handle_level_irq+0xb8/0xe8) from [<c005ecac>] (generic_handle_irq+0x2c/0x44)
[<c005ecac>] (generic_handle_irq+0x2c/0x44) from [<c000e5b4>] (handle_IRQ+0x64/0x8c)
[<c000e5b4>] (handle_IRQ+0x64/0x8c) from [<c00084cc>] (omap3_intc_handle_irq+0x58/0x70)
[<c00084cc>] (omap3_intc_handle_irq+0x58/0x70) from [<c000d940>] (__irq_svc+0x40/0x60)
Exception stack(0xcf02be40 to 0xcf02be88)
be40: 00000000 0000000a 00000000 00000021 c043d044 0000000a 00000000 cf04b740
be60: 60000013 c043d074 00000000 c045fd80 cf006080 cf02be88 c0061834 c005fff8
be80: 60000013 ffffffff
[<c000d940>] (__irq_svc+0x40/0x60) from [<c005fff8>] (__setup_irq+0x2a4/0x358)
[<c005fff8>] (__setup_irq+0x2a4/0x358) from [<c00602b8>] (request_threaded_irq+0xc0/0x114)
[<c00602b8>] (request_threaded_irq+0xc0/0x114) from [<c03ffe28>] (omap3_l3_probe+0x108/0x164)
[<c03ffe28>] (omap3_l3_probe+0x108/0x164) from [<c01964e8>] (platform_drv_probe+0x1c/0x24)
[<c01964e8>] (platform_drv_probe+0x1c/0x24) from [<c0195410>] (driver_probe_device+0xcc/0x21c)
[<c0195410>] (driver_probe_device+0xcc/0x21c) from [<c01955c0>] (__driver_attach+0x60/0x84)
[<c01955c0>] (__driver_attach+0x60/0x84) from [<c0193ea4>] (bus_for_each_dev+0x4c/0x8c)
[<c0193ea4>] (bus_for_each_dev+0x4c/0x8c) from [<c0194524>] (bus_add_driver+0xa0/0x21c)
[<c0194524>] (bus_add_driver+0xa0/0x21c) from [<c01959e0>] (driver_register+0xa0/0x12c)
[<c01959e0>] (driver_register+0xa0/0x12c) from [<c01967b8>] (platform_driver_probe+0x1c/0x70)
[<c01967b8>] (platform_driver_probe+0x1c/0x70) from [<c0008660>] (do_one_initcall+0x94/0x15c)
[<c0008660>] (do_one_initcall+0x94/0x15c) from [<c03f62fc>] (kernel_init+0xd4/0x1ac)
[<c03f62fc>] (kernel_init+0xd4/0x1ac) from [<c000e654>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1b75b31a2719ed1d ]---
omap_mux_init: Add partition: #1: core, flags: 0
 usbhs_omap: alias fck already exists
[...]
hci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap.0 supply hsusb0 not found, using dummy regulator
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OMAP-EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-rc6+ ehci_hcd
usb usb1: SerialNumber: ehci-omap.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
[...]
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-am35x musb-am35x: failed to get clock
musb-am35x: probe of musb-am35x failed with error -2

Any ideas? Not following OMAP development for a long time was
probably a bad idea.

Thanks,
	ladis

Re: latest kernel for am35xx

[Ladislav Michl]

On Mon, Jun 04, 2012 at 09:28:23AM +0200, Ladislav Michl wrote:
> does USB work for you? I forward ported support for TechNexion's TAM-3517 on
> Twister board to current master, but so far no luck with mass storage
> support (patch for reference http://ladislav.michl.sweb.cz/tam3517.patch).

patch updated, so now does not contain random clock changes, so output changes:
omap_hwmod: am35x_otg_hs: cannot be enabled for reset (3)
...
usbhs_omap: alias fck already exists
...
Switching to clocksource 32k_counter
usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
...
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc: musb_init_controller failed with status -19

It would be nice to update master branch :-)

	ladis

Re: latest kernel for am35xx

[Mark A. Greer]

[Somehow this didn't get out the first time so resending.]

On Thu, May 31, 2012 at 08:36:05PM -0700, Mark A. Greer wrote:
> On Thu, May 31, 2012 at 10:08:44AM +0300, Maxim Podbereznyy wrote:
> > Hi!
> 
> Hi Maxim
> 
> > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git
> > Does anyone knows a working branch/tag for am3517evm? I need the board
> > boots fine with Ethernet enabled and working.
> > 
> > I read a few messages at e2e forum and all of them report about broken
> > features.. I need wl1271 support in the kernel therefore I have to use
> > on the latest kernels.
> 
> There are several issues with the am35x code in the current community.
> However, if you checkout k.o. v3.4, use omap2plus_defconfig, enable
> CONFIG_TI_DAVINCI_EMAC, and add 'nohlt' to the cmdline, you will be
> able to boot the am3517evm.  Don't try a Suspend-to-RAM though.
> 
> Mark
> --

Re: latest kernel for am35xx

[Maxim Podbereznyy]

Hey Mark!

I don't like to look stupid, but I don't find v3.4 tag here:
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=tags

please have a look at. There are only a few candidates there for the v3.4


2012/6/1 Mark A. Greer <mgreer@animalcreek.com>:
> [Somehow this didn't get out the first time so resending.]
>
> On Thu, May 31, 2012 at 08:36:05PM -0700, Mark A. Greer wrote:
>> On Thu, May 31, 2012 at 10:08:44AM +0300, Maxim Podbereznyy wrote:
>> > Hi!
>>
>> Hi Maxim
>>
>> > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git
>> > Does anyone knows a working branch/tag for am3517evm? I need the board
>> > boots fine with Ethernet enabled and working.
>> >
>> > I read a few messages at e2e forum and all of them report about broken
>> > features.. I need wl1271 support in the kernel therefore I have to use
>> > on the latest kernels.
>>
>> There are several issues with the am35x code in the current community.
>> However, if you checkout k.o. v3.4, use omap2plus_defconfig, enable
>> CONFIG_TI_DAVINCI_EMAC, and add 'nohlt' to the cmdline, you will be
>> able to boot the am3517evm.  Don't try a Suspend-to-RAM though.
>>
>> Mark
>> --
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: latest kernel for am35xx

[Mark A. Greer]

On Fri, Jun 01, 2012 at 09:23:07PM +0400, Maxim Podbereznyy wrote:
> Hey Mark!

Hi Maxim.

> I don't like to look stupid, but I don't find v3.4 tag here:
> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=tags
> 
> please have a look at. There are only a few candidates there for the v3.4

I'm sorry, I wasn't very clear.  The repository I meant was

	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

That repository should have a tag called 'v3.4'.

Mark