From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH RESEND] OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED Date: Wed, 20 Jun 2012 07:31:51 -0700 Message-ID: <20120620143149.GR12766@atomide.com> References: <1340115769-16902-1-git-send-email-brian.austin@cirrus.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-01-ewr.mailhop.org ([204.13.248.71]:34614 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756515Ab2FTObx (ORCPT ); Wed, 20 Jun 2012 10:31:53 -0400 Content-Disposition: inline In-Reply-To: <1340115769-16902-1-git-send-email-brian.austin@cirrus.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Brian Austin Cc: linux-omap@vger.kernel.org, balbi@ti.com * Brian Austin [120619 07:29]: > The beagleboard USB Host Port that is used is Port 2. The platform driver sets MODE_PHY for port 1 causing pin muxing to override the pins on the expansion > connector P17 when using board_mux[]. Since USBHS Port 1 is not connected remove the case for muxing the USB Port1 pins by default. > > Patch is based off of 3.5-rc2 from ASoC for-next branch > > Tested with BeagleBoard xM revC and checked the userguides for Beagle xM and revC to be sure USB Port2 is what is used. Thanks applying into fixes. Tony > > Signed-off-by: Brian Austin > --- > arch/arm/mach-omap2/board-omap3beagle.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 79c6909..75eb88a 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -435,7 +435,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { > > static const struct usbhs_omap_board_data usbhs_bdata __initconst = { > > - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, > + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, > .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, > .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, > > -- > 1.7.10.4 > >