From: Tony Lindgren <tony@atomide.com>
To: Afzal Mohammed <afzal@ti.com>
Cc: artem.bityutskiy@linux.intel.com, linux-omap@vger.kernel.org,
linux-mtd@lists.infradead.org, ivan.djelic@parrot.com
Subject: Re: [PATCH v3 10/10] mtd: nand: omap2: use gpmc provided irqs
Date: Fri, 24 Aug 2012 12:29:47 -0700 [thread overview]
Message-ID: <20120824192947.GT11011@atomide.com> (raw)
In-Reply-To: <c5a608a70a875191e1323958c74fb2ac8dfa34b3.1344609341.git.afzal@ti.com>
Artem,
* Afzal Mohammed <afzal@ti.com> [120821 02:44]:
> GPMC platform initialization provides it's clients
> with interrupts that can be used through struct
> resource. Make use of it for irq mode functionality.
>
> Also now write protect disable is done by GPMC,
> hence remove it.
>
> Signed-off-by: Afzal Mohammed <afzal@ti.com>
> ---
>
> v3: Handle error path properly
Care to (re)ack this one as the error path handling changed?
Regards,
Tony
> drivers/mtd/nand/omap2.c | 76 +++++++++++++++++++++++++++++-----------------
> 1 files changed, 48 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index f65f7f8..0e9d7b3 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -137,7 +137,8 @@ struct omap_nand_info {
> unsigned long mem_size;
> struct completion comp;
> struct dma_chan *dma;
> - int gpmc_irq;
> + int gpmc_irq_fifo;
> + int gpmc_irq_count;
> enum {
> OMAP_NAND_IO_READ = 0, /* read */
> OMAP_NAND_IO_WRITE, /* write */
> @@ -553,14 +554,12 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
> {
> struct omap_nand_info *info = (struct omap_nand_info *) dev;
> u32 bytes;
> - u32 irq_stat;
>
> - irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
> bytes = readl(info->reg.gpmc_prefetch_status);
> bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
> bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
> if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
> - if (irq_stat & 0x2)
> + if (this_irq == info->gpmc_irq_count)
> goto done;
>
> if (info->buf_len && (info->buf_len < bytes))
> @@ -577,20 +576,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
> (u32 *)info->buf, bytes >> 2);
> info->buf = info->buf + bytes;
>
> - if (irq_stat & 0x2)
> + if (this_irq == info->gpmc_irq_count)
> goto done;
> }
> - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
>
> return IRQ_HANDLED;
>
> done:
> complete(&info->comp);
> - /* disable irq */
> - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
>
> - /* clear status */
> - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
> + disable_irq_nosync(info->gpmc_irq_fifo);
> + disable_irq_nosync(info->gpmc_irq_count);
>
> return IRQ_HANDLED;
> }
> @@ -624,9 +620,9 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
> goto out_copy;
>
> info->buf_len = len;
> - /* enable irq */
> - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
> - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
> +
> + enable_irq(info->gpmc_irq_count);
> + enable_irq(info->gpmc_irq_fifo);
>
> /* waiting for read to complete */
> wait_for_completion(&info->comp);
> @@ -674,12 +670,13 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
> goto out_copy;
>
> info->buf_len = len;
> - /* enable irq */
> - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
> - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
> +
> + enable_irq(info->gpmc_irq_count);
> + enable_irq(info->gpmc_irq_fifo);
>
> /* waiting for write to complete */
> wait_for_completion(&info->comp);
> +
> /* wait for data to flushed-out before reset the prefetch */
> tim = 0;
> limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
> @@ -1300,9 +1297,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> info->nand.options = pdata->devsize;
> info->nand.options |= NAND_SKIP_BBTSCAN;
>
> - /* NAND write protect off */
> - gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (res == NULL) {
> err = -EINVAL;
> @@ -1393,17 +1387,37 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> break;
>
> case NAND_OMAP_PREFETCH_IRQ:
> - err = request_irq(pdata->gpmc_irq,
> - omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
> + info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
> + if (info->gpmc_irq_fifo <= 0) {
> + dev_err(&pdev->dev, "error getting fifo irq\n");
> + goto out_release_mem_region;
> + }
> + err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
> + IRQF_SHARED, "gpmc-nand-fifo", info);
> if (err) {
> dev_err(&pdev->dev, "requesting irq(%d) error:%d",
> - pdata->gpmc_irq, err);
> + info->gpmc_irq_fifo, err);
> + info->gpmc_irq_fifo = 0;
> + goto out_release_mem_region;
> + }
> +
> + info->gpmc_irq_count = platform_get_irq(pdev, 1);
> + if (info->gpmc_irq_count <= 0) {
> + dev_err(&pdev->dev, "error getting count irq\n");
> + goto out_release_mem_region;
> + }
> + err = request_irq(info->gpmc_irq_count, omap_nand_irq,
> + IRQF_SHARED, "gpmc-nand-count", info);
> + if (err) {
> + dev_err(&pdev->dev, "requesting irq(%d) error:%d",
> + info->gpmc_irq_count, err);
> + info->gpmc_irq_count = 0;
> goto out_release_mem_region;
> - } else {
> - info->gpmc_irq = pdata->gpmc_irq;
> - info->nand.read_buf = omap_read_buf_irq_pref;
> - info->nand.write_buf = omap_write_buf_irq_pref;
> }
> +
> + info->nand.read_buf = omap_read_buf_irq_pref;
> + info->nand.write_buf = omap_write_buf_irq_pref;
> +
> break;
>
> default:
> @@ -1491,6 +1505,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
> out_release_mem_region:
> if (info->dma)
> dma_release_channel(info->dma);
> + if (info->gpmc_irq_count > 0)
> + free_irq(info->gpmc_irq_count, info);
> + if (info->gpmc_irq_fifo > 0)
> + free_irq(info->gpmc_irq_fifo, info);
> release_mem_region(info->phys_base, info->mem_size);
> out_free_info:
> kfree(info);
> @@ -1509,8 +1527,10 @@ static int omap_nand_remove(struct platform_device *pdev)
> if (info->dma)
> dma_release_channel(info->dma);
>
> - if (info->gpmc_irq)
> - free_irq(info->gpmc_irq, info);
> + if (info->gpmc_irq_count > 0)
> + free_irq(info->gpmc_irq_count, info);
> + if (info->gpmc_irq_fifo > 0)
> + free_irq(info->gpmc_irq_fifo, info);
>
> /* Release NAND device, its internal structures and partitions */
> nand_release(&info->mtd);
> --
> 1.7.1
>
next prev parent reply other threads:[~2012-08-24 19:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 9:38 [PATCH v3 00/10] Prepare for GPMC driver conversion (w.r.t MTD) Afzal Mohammed
2012-08-21 9:41 ` [PATCH v3 01/10] ARM: OMAP2+: gpmc: update nand register helper Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 02/10] ARM: OMAP2+: gpmc-nand: update gpmc-nand regs Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 03/10] mtd: nand: omap2: handle nand on gpmc Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 04/10] ARM: OMAP2+: gpmc-nand: update resource with memory Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 05/10] ARM: OMAP2+: gpmc-onenand: provide memory as resource Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 06/10] mtd: nand: omap2: obtain memory from resource Afzal Mohammed
2012-08-21 9:43 ` [PATCH v3 07/10] mtd: onenand: " Afzal Mohammed
2012-08-21 9:44 ` [PATCH v3 08/10] ARM: OMAP2+: gpmc: Modify interrupt handling Afzal Mohammed
2012-08-21 9:44 ` [PATCH v3 09/10] ARM: OMAP2+: gpmc-nand: Modify Interrupt handling Afzal Mohammed
2012-08-21 9:44 ` [PATCH v3 10/10] mtd: nand: omap2: use gpmc provided irqs Afzal Mohammed
2012-08-24 19:29 ` Tony Lindgren [this message]
2012-08-25 11:48 ` Artem Bityutskiy
2012-08-30 19:53 ` Tony Lindgren
2012-09-11 0:17 ` Tony Lindgren
2012-09-11 5:36 ` Mohammed, Afzal
2012-09-11 5:42 ` Tony Lindgren
2012-09-11 6:40 ` Mohammed, Afzal
2012-09-11 18:21 ` Tony Lindgren
2012-09-12 9:21 ` Mohammed, Afzal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120824192947.GT11011@atomide.com \
--to=tony@atomide.com \
--cc=afzal@ti.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=ivan.djelic@parrot.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).