* DT support for Overo?
@ 2012-08-29 9:39 Florian Vaussard
2012-08-29 14:56 ` Andy Doan
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Florian Vaussard @ 2012-08-29 9:39 UTC (permalink / raw)
To: Steve Sakoman, andy.doan; +Cc: linux-omap
Hello,
Before doing the work twice, is someone working on the arm/dts for the overo
board? I found a first support in the linaro tree [1], but is there any
active
work to complete this support and push it upstream? I am preparing a
daughter
board with some specific hardware, thus I could give some help with the
conversion effort.
Best regards,
Florian
[1] http://patches.linaro.org/833/
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: DT support for Overo?
2012-08-29 9:39 DT support for Overo? Florian Vaussard
@ 2012-08-29 14:56 ` Andy Doan
2012-08-29 15:20 ` Steve Sakoman
2012-08-29 23:23 ` Tony Lindgren
2 siblings, 0 replies; 5+ messages in thread
From: Andy Doan @ 2012-08-29 14:56 UTC (permalink / raw)
To: florian.vaussard; +Cc: Steve Sakoman, linux-omap
On 08/29/2012 04:39 AM, Florian Vaussard wrote:
> Hello,
>
> Before doing the work twice, is someone working on the arm/dts for
> the overo board? I found a first support in the linaro tree [1], but
> is there any active work to complete this support and push it
> upstream? I am preparing a daughter board with some specific
> hardware, thus I could give some help with the conversion effort.
I'm no longer doing any work in this area.
> Best regards, Florian
>
> [1] http://patches.linaro.org/833/
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: DT support for Overo?
2012-08-29 9:39 DT support for Overo? Florian Vaussard
2012-08-29 14:56 ` Andy Doan
@ 2012-08-29 15:20 ` Steve Sakoman
2012-08-29 23:23 ` Tony Lindgren
2 siblings, 0 replies; 5+ messages in thread
From: Steve Sakoman @ 2012-08-29 15:20 UTC (permalink / raw)
To: florian.vaussard; +Cc: andy.doan, linux-omap
On Wed, Aug 29, 2012 at 2:39 AM, Florian Vaussard
<florian.vaussard@epfl.ch> wrote:
> Before doing the work twice, is someone working on the arm/dts for the overo
> board? I found a first support in the linaro tree [1], but is there any
> active
> work to complete this support and push it upstream? I am preparing a
> daughter
> board with some specific hardware, thus I could give some help with the
> conversion effort.
Gumstix hasn't asked me to do any work on dts, so I'm not doing anything either.
Steve
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: DT support for Overo?
2012-08-29 9:39 DT support for Overo? Florian Vaussard
2012-08-29 14:56 ` Andy Doan
2012-08-29 15:20 ` Steve Sakoman
@ 2012-08-29 23:23 ` Tony Lindgren
2012-08-30 9:09 ` Florian Vaussard
2 siblings, 1 reply; 5+ messages in thread
From: Tony Lindgren @ 2012-08-29 23:23 UTC (permalink / raw)
To: Florian Vaussard; +Cc: Steve Sakoman, andy.doan, linux-omap
* Florian Vaussard <florian.vaussard@epfl.ch> [120829 02:46]:
> Hello,
>
> Before doing the work twice, is someone working on the arm/dts for the overo
> board? I found a first support in the linaro tree [1], but is there
> any active
> work to complete this support and push it upstream? I am preparing a
> daughter
> board with some specific hardware, thus I could give some help with the
> conversion effort.
Great, go for it! The DMA engine binding is still missing as well as
bindings for some drivers. But your should be able to get basic things
going quite easily.
Regards,
Tony
> [1] http://patches.linaro.org/833/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: DT support for Overo?
2012-08-29 23:23 ` Tony Lindgren
@ 2012-08-30 9:09 ` Florian Vaussard
0 siblings, 0 replies; 5+ messages in thread
From: Florian Vaussard @ 2012-08-30 9:09 UTC (permalink / raw)
To: Tony Lindgren; +Cc: Steve Sakoman, andy.doan, linux-omap
Le 30/08/2012 01:23, Tony Lindgren a écrit :
> * Florian Vaussard <florian.vaussard@epfl.ch> [120829 02:46]:
>> Hello,
>>
>> Before doing the work twice, is someone working on the arm/dts for the overo
>> board? I found a first support in the linaro tree [1], but is there
>> any active
>> work to complete this support and push it upstream? I am preparing a
>> daughter
>> board with some specific hardware, thus I could give some help with the
>> conversion effort.
> Great, go for it! The DMA engine binding is still missing as well as
> bindings for some drivers. But your should be able to get basic things
> going quite easily.
Ok, I will have a look in the coming days.
Regards,
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-08-30 9:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-29 9:39 DT support for Overo? Florian Vaussard
2012-08-29 14:56 ` Andy Doan
2012-08-29 15:20 ` Steve Sakoman
2012-08-29 23:23 ` Tony Lindgren
2012-08-30 9:09 ` Florian Vaussard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).