[PATCH 3/6] ARM: OMAP2+: move MPU INTCPS, secure monitor, SDRC build directives in Makefile

Paul Walmsley
2012-09-08T00:41:47Z

Move MPU INTCPS (interrupt controller) and secure monitor code build
directives to their own Makefile sections, for clarity. Coalesce
SDRC-related Makefile directives into the SDRC Makefile section.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bdcf508..437ca322 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,23 +6,27 @@
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o

-omap-2-3-common = irq.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o

-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += irq.o
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(secure-common)
+# INTCPS IP block support - XXX should be moved to drivers/
+obj-$(CONFIG_ARCH_OMAP2) += irq.o
+obj-$(CONFIG_ARCH_OMAP3) += irq.o
+obj-$(CONFIG_SOC_AM33XX) += irq.o
+
+# Secure monitor API support
+obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
+obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
+
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o
+obj-$(CONFIG_SOC_OMAP5) += prm44xx.o

ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif

obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o

# SMP support ONLY available for OMAP4

@@ -56,6 +60,7 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o

# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)