Re: USB problem on beagleboard clone

[Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1052 bytes --]

Hi,

On Fri, Sep 14, 2012 at 03:38:56PM +0200, Maximilian Schwerin wrote:
> > > > I have never seen that error before on any of the boards 
> > I have. One
> > > > question though, if the port is always Host, why are you 
> > using the OTG
> > > > subsystem instead of the actual Host Subsystem which has an EHCI
> > > > controller ?
> > > > 
> > > > -- 
> > > > balbi
> > > > 
> > > 
> > > I'm still on 3.3 but am planing to go to a newer version. 
> > We used the
> > > OTG port so we would not need another chip on a rather small board.
> > 
> > And which chip are you talking about ? You already have 
> > LAN9514 on your
> > board anyway...
> > 
> > -- 
> > balbi
> > 
> 
> How would I connect the OMAP to the LAN9514 without a PHY?

Fair enough.. for whatever reason I assumed you had external PHY with
MUSB. But seems like you're using the internal PHY...

Anyway, please check with my tree (see MAINTAINERS file), either master
branch or musb branch and let me know if you have the same behavior.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]