From: Tony Lindgren <tony@atomide.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL v2] ARM: OMAP: second set of PRCM cleanups for 3.8
Date: Fri, 9 Nov 2012 14:14:33 -0800 [thread overview]
Message-ID: <20121109221433.GX6801@atomide.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1211091654590.20703@utopia.booyaka.com>
* Paul Walmsley <paul@pwsan.com> [121109 08:57]:
> Hi Tony,
>
> The following changes since commit 7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33:
>
> Merge branch 'omap-for-v3.8/cleanup-headers' into omap-for-v3.8/cleanup-prcm (2012-10-26 13:32:22 -0700)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending.git tags/omap-cleanup-b2-for-3.8
>
> for you to fetch changes up to b99db36cdf37decb1b5575c5f293d170cbbc53d6:
>
> ARM: OMAP2+: PRCM: remove obsolete prcm.[ch] (2012-11-08 15:09:26 -0700)
>
> ----------------------------------------------------------------
> Second set of OMAP PRCM cleanups for 3.8.
>
> These patches remove the use of omap_prcm_get_reset_sources() from the
> OMAP watchdog driver, and remove mach-omap2/prcm.c and
> plat-omap/include/plat/prcm.h.
Thanks pulling into omap-for-v3.8/cleanup-prcm.
Regards,
Tony
> Basic test logs for this branch on top of Tony's cleanup-prcm branch
> at commit 7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33 are here:
>
> http://www.pwsan.com/omap/testlogs/prcm_cleanup_b_3.8/20121108151646/
>
> However, cleanup-prcm at 7fc54fd3 does not include some fixes
> that are needed for a successful test. With several reverts,
> fixes, and workarounds applied, the following test logs were
> obtained:
>
> http://www.pwsan.com/omap/testlogs/TEST_prcm_cleanup_b_3.8/20121108151930/
>
> which indicate that the series tests cleanly.
>
> This second pull request updates one of the patches which broke
> with rmk's allnoconfigs, and also updates the tag description to
> indicate that 7fc54fd3 is building cleanly here.
>
> ----------------------------------------------------------------
>
> vmlinux object size
> (delta in bytes from test_cleanup-prcm_7fc54fd_v3.7-rc (7fc54fd3084457c7f11b9e2e1e3fcd19a3badc33)):
> text data bss total kernel
> -104 -72 0 -176 am33xx_only
> +120 -64 0 +56 n800_multi_omap2xxx
> +336 -32 0 +304 n800_only_a
> +88 -24 0 +64 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> +132 -8 0 +124 omap1_defconfig_5912osk_only
> +788 -232 0 +556 omap2plus_defconfig
> +336 -32 0 +304 omap2plus_defconfig_2430sdp_only
> +788 -240 0 +548 omap2plus_defconfig_cpupm
> +844 -224 0 +620 omap2plus_defconfig_no_pm
> +336 -144 0 +192 omap2plus_defconfig_omap2_4_only
> +4528 -112 0 +4416 omap2plus_defconfig_omap3_4_only
> +1524 -248 +3472 +4748 rmk_omap3430_ldp_allnoconfig
> +312 -48 0 +264 rmk_omap3430_ldp_oldconfig
> +1524 -248 +3472 +4748 rmk_omap4430_sdp_allnoconfig
> +208 -48 0 +160 rmk_omap4430_sdp_oldconfig
>
>
> Paul Walmsley (17):
> ARM: OMAP1: CGRM: fix omap1_get_reset_sources() return type
> ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer
> watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptr
> ARM: OMAP2+: PRCM: remove omap_prcm_get_reset_sources()
> ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
> ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method)
> ARM: OMAP2xxx: clock: remove global 'dclk' variable
> ARM: OMAP2xxx: clock: move virt_prcm_set code into clkt2xxx_virt_prcm_set.c
> ARM: OMAP2+: PRCM: create SoC-specific chip restart functions
> ARM: OMAP2+: board files: use SoC-specific system restart functions
> ARM: OMAP2xxx: APLL/CM: convert to use omap2_cm_wait_module_ready()
> ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions
> ARM: OMAP2+: PRCM: remove omap2_cm_wait_idlest()
> ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
> ARM: OMAP2+: PRCM: consolidate PRCM-related timeout macros
> ARM: OMAP2+: hwmod: call to _omap4_disable_module() should use the SoC-specific call
> ARM: OMAP2+: PRCM: remove obsolete prcm.[ch]
>
> arch/arm/mach-omap1/common.h | 2 +-
> arch/arm/mach-omap1/devices.c | 21 ++-
> arch/arm/mach-omap1/reset.c | 9 +-
> arch/arm/mach-omap2/Makefile | 7 +-
> arch/arm/mach-omap2/am33xx.h | 1 +
> arch/arm/mach-omap2/board-2430sdp.c | 2 +-
> arch/arm/mach-omap2/board-3430sdp.c | 2 +-
> arch/arm/mach-omap2/board-3630sdp.c | 2 +-
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-am3517crane.c | 2 +-
> arch/arm/mach-omap2/board-am3517evm.c | 2 +-
> arch/arm/mach-omap2/board-apollon.c | 2 +-
> arch/arm/mach-omap2/board-cm-t35.c | 18 +--
> arch/arm/mach-omap2/board-cm-t3517.c | 2 +-
> arch/arm/mach-omap2/board-devkit8000.c | 2 +-
> arch/arm/mach-omap2/board-generic.c | 10 +-
> arch/arm/mach-omap2/board-h4.c | 2 +-
> arch/arm/mach-omap2/board-igep0020.c | 4 +-
> arch/arm/mach-omap2/board-ldp.c | 2 +-
> arch/arm/mach-omap2/board-n8x0.c | 6 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
> arch/arm/mach-omap2/board-omap3evm.c | 2 +-
> arch/arm/mach-omap2/board-omap3logic.c | 4 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
> arch/arm/mach-omap2/board-omap3stalker.c | 2 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> arch/arm/mach-omap2/board-overo.c | 2 +-
> arch/arm/mach-omap2/board-rm680.c | 4 +-
> arch/arm/mach-omap2/board-rx51.c | 2 +-
> arch/arm/mach-omap2/board-ti8168evm.c | 4 +-
> arch/arm/mach-omap2/board-zoom.c | 4 +-
> arch/arm/mach-omap2/clkt2xxx_apll.c | 57 ++------
> arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 36 ++++-
> arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 70 ++++++++--
> arch/arm/mach-omap2/clkt_iclk.c | 1 -
> arch/arm/mach-omap2/clock.c | 57 +++++++-
> arch/arm/mach-omap2/clock.h | 28 ----
> arch/arm/mach-omap2/clock2420_data.c | 26 +---
> arch/arm/mach-omap2/clock2430_data.c | 26 +---
> arch/arm/mach-omap2/clock2xxx.c | 16 ---
> arch/arm/mach-omap2/clock2xxx.h | 9 +-
> arch/arm/mach-omap2/cm-regbits-24xx.h | 2 +
> arch/arm/mach-omap2/cm.h | 20 ++-
> arch/arm/mach-omap2/cm2xxx.c | 128 ++++++++++++++++-
> arch/arm/mach-omap2/cm2xxx.h | 4 +
> arch/arm/mach-omap2/cm2xxx_3xxx.h | 8 +-
> arch/arm/mach-omap2/cm3xxx.c | 66 +++++++++
> arch/arm/mach-omap2/cm3xxx.h | 5 +
> arch/arm/mach-omap2/cm_common.c | 70 +++++++++-
> arch/arm/mach-omap2/cminst44xx.h | 2 +
> arch/arm/mach-omap2/common.c | 183 -------------------------
> arch/arm/mach-omap2/common.h | 133 +++++-------------
> arch/arm/mach-omap2/control.c | 10 +-
> arch/arm/mach-omap2/control.h | 2 +
> arch/arm/mach-omap2/cpuidle34xx.c | 1 -
> arch/arm/mach-omap2/devices.c | 26 ----
> arch/arm/mach-omap2/display.c | 2 +-
> arch/arm/mach-omap2/hdq1w.c | 4 +-
> arch/arm/mach-omap2/i2c.c | 6 +-
> arch/arm/mach-omap2/id.c | 7 +-
> arch/arm/mach-omap2/io.c | 86 ++++++++++--
> arch/arm/mach-omap2/mcbsp.c | 2 +-
> arch/arm/mach-omap2/msdi.c | 4 +-
> arch/arm/mach-omap2/omap2-restart.c | 65 +++++++++
> arch/arm/mach-omap2/omap3-restart.c | 36 +++++
> arch/arm/mach-omap2/omap4-common.c | 19 +++
> arch/arm/mach-omap2/omap_hwmod.c | 8 +-
> arch/arm/mach-omap2/pm34xx.c | 1 -
> arch/arm/mach-omap2/powerdomain.c | 2 -
> arch/arm/mach-omap2/prcm-common.h | 22 ---
> arch/arm/mach-omap2/prcm.c | 189 --------------------------
> arch/arm/mach-omap2/prcm_mpu44xx.c | 17 +++
> arch/arm/mach-omap2/prcm_mpu44xx.h | 9 +-
> arch/arm/mach-omap2/prm.h | 24 +++-
> arch/arm/mach-omap2/prm2xxx.c | 15 +-
> arch/arm/mach-omap2/prm2xxx.h | 2 +
> arch/arm/mach-omap2/prm2xxx_3xxx.h | 7 -
> arch/arm/mach-omap2/prm3xxx.c | 16 ++-
> arch/arm/mach-omap2/prm3xxx.h | 2 +
> arch/arm/mach-omap2/prm44xx.c | 1 -
> arch/arm/mach-omap2/prm_common.c | 16 ++-
> arch/arm/mach-omap2/prminst44xx.h | 2 +
> arch/arm/mach-omap2/sdrc.c | 8 +-
> arch/arm/mach-omap2/sdrc.h | 2 +
> arch/arm/mach-omap2/ti81xx.h | 9 ++
> arch/arm/mach-omap2/wd_timer.c | 40 +++++-
> arch/arm/plat-omap/include/plat/prcm.h | 37 -----
> drivers/watchdog/omap_wdt.c | 26 ++--
> include/linux/platform_data/omap-wd-timer.h | 38 ++++++
> 90 files changed, 991 insertions(+), 851 deletions(-)
> create mode 100644 arch/arm/mach-omap2/omap2-restart.c
> create mode 100644 arch/arm/mach-omap2/omap3-restart.c
> delete mode 100644 arch/arm/mach-omap2/prcm.c
> delete mode 100644 arch/arm/plat-omap/include/plat/prcm.h
> create mode 100644 include/linux/platform_data/omap-wd-timer.h
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2012-11-09 22:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-09 16:56 [GIT PULL v2] ARM: OMAP: second set of PRCM cleanups for 3.8 Paul Walmsley
2012-11-09 22:14 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121109221433.GX6801@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).