From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] OMAP: omap4-panda: add UART2 muxing for WiLink shared transport Date: Mon, 21 Jan 2013 10:21:59 -0800 Message-ID: <20130121182158.GD22517@atomide.com> References: <1358766852-24503-1-git-send-email-coelho@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:40863 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752008Ab3AUSWD (ORCPT ); Mon, 21 Jan 2013 13:22:03 -0500 Content-Disposition: inline In-Reply-To: <1358766852-24503-1-git-send-email-coelho@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Luciano Coelho Cc: peter.ujfalusi@ti.com, balbi@ti.com, linux-omap@vger.kernel.org, linux@arm.linux.org.uk, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org * Luciano Coelho [130121 03:18]: > Add the UART2 muxing data to the board file (this used to be, > erroneously, done in the bootloader). > > Cc: stable [3.7] > Signed-off-by: Luciano Coelho Thanks applying into omap-for-v3.8-rc4/fixes. Regards, Tony > --- > arch/arm/mach-omap2/board-omap4panda.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c > index 5c8e9ce..769c1fe 100644 > --- a/arch/arm/mach-omap2/board-omap4panda.c > +++ b/arch/arm/mach-omap2/board-omap4panda.c > @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { > OMAP_PULL_ENA), > OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), > > + /* UART2 - BT/FM/GPS shared transport */ > + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), > + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), > + > { .reg_offset = OMAP_MUX_TERMINATOR }, > }; > > -- > 1.7.10.4 >