From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pali =?utf-8?q?Roh=C3=A1r?= Subject: [PATCH] ADP1653 board code for Nokia RX-51 Date: Sun, 17 Feb 2013 16:16:49 +0100 Message-ID: <201302171616.50152@pali> Mime-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1961998.jPWA2rUJ6Z"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Tony Lindgren , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-omap@vger.kernel.org --nextPart1961998.jPWA2rUJ6Z Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hello, I'm sending ADP1653 flash torch board code for Nokia RX-51. Kernel driver ADP1653 is already in upstream kernel. Board code was extracted from this big camera meego patch: https://api.pub.meego.com/public/source/CE:Adaptation:N900/kernel-adaptatio= n-n900/linux-2.6-Camera-for-Meego-N900-Adaptation-kernel-2.6.37-patch.patch diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-r= x51.c index d0374ea..92117a13 100644 =2D-- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -75,6 +75,7 @@ static struct platform_device leds_gpio =3D { */ =20 extern void __init rx51_peripherals_init(void); +extern void __init rx51_camera_init(void); =20 #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata =3D { @@ -100,6 +101,7 @@ static void __init rx51_init(void) =20 usb_musb_init(&musb_board_data); rx51_peripherals_init(); + rx51_camera_init(); =20 /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-camera.c b/arch/arm/mach-omap2/= board-rx51-camera.c new file mode 100644 index 0000000..26b37ea =2D-- /dev/null +++ b/arch/arm/mach-omap2/board-rx51-camera.c @@ -0,0 +1,177 @@ +/* + * arch/arm/mach-omap2/board-rx51-camera.c + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Sakari Ailus + * Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include + +#include "../../../drivers/media/platform/omap3isp/isp.h" + +#include + +#include "devices.h" + +#define ADP1653_GPIO_ENABLE 88 /* Used for resetting ADP1653 */ +#define ADP1653_GPIO_INT 167 /* Fault interrupt */ +#define ADP1653_GPIO_STROBE 126 /* Pin used in cam_strobe mode -> + * control using ISP drivers */ + +static int __init rx51_adp1653_init(void) +{ + int err; + + err =3D gpio_request(ADP1653_GPIO_ENABLE, "adp1653 enable"); + if (err) { + printk(KERN_ERR ADP1653_NAME + " Failed to request EN gpio\n"); + err =3D -ENODEV; + goto err_omap_request_gpio; + } + + err =3D gpio_request(ADP1653_GPIO_INT, "adp1653 interrupt"); + if (err) { + printk(KERN_ERR ADP1653_NAME " Failed to request IRQ gpio\n"); + err =3D -ENODEV; + goto err_omap_request_gpio_2; + } + + err =3D gpio_request(ADP1653_GPIO_STROBE, "adp1653 strobe"); + if (err) { + printk(KERN_ERR ADP1653_NAME + " Failed to request STROBE gpio\n"); + err =3D -ENODEV; + goto err_omap_request_gpio_3; + } + + gpio_direction_output(ADP1653_GPIO_ENABLE, 0); + gpio_direction_input(ADP1653_GPIO_INT); + gpio_direction_output(ADP1653_GPIO_STROBE, 0); + + return 0; + +err_omap_request_gpio_3: + gpio_free(ADP1653_GPIO_INT); + +err_omap_request_gpio_2: + gpio_free(ADP1653_GPIO_ENABLE); + +err_omap_request_gpio: + return err; +} + +static int __init rx51_camera_hw_init(void) +{ + int rval; + + rval =3D rx51_adp1653_init(); + if (rval) + return rval; + + return 0; +} + +/* + * + * ADP1653 + * + */ + +static int rx51_adp1653_power(struct v4l2_subdev *subdev, int on) +{ + gpio_set_value(ADP1653_GPIO_ENABLE, on); + if (on) { + /* Some delay is apparently required. */ + udelay(20); + } + + return 0; +} + +static struct adp1653_platform_data rx51_adp1653_platform_data =3D { + .power =3D rx51_adp1653_power, + /* Must be limited to 500 ms in RX-51 */ + .max_flash_timeout =3D 500000, /* us */ + /* Must be limited to 320 mA in RX-51 B3 and newer hardware */ + .max_flash_intensity =3D ADP1653_FLASH_INTENSITY_REG_TO_mA(19), + /* Must be limited to 50 mA in RX-51 */ + .max_torch_intensity =3D ADP1653_FLASH_INTENSITY_REG_TO_mA(1), + .max_indicator_intensity =3D ADP1653_INDICATOR_INTENSITY_REG_TO_uA( + ADP1653_REG_OUT_SEL_ILED_MAX), +}; + +/* + * + * Init it all + * + */ + +#define ADP1653_I2C_BUS_NUM 2 + +static struct i2c_board_info rx51_camera_i2c_devices[] =3D { + { + I2C_BOARD_INFO(ADP1653_NAME, ADP1653_I2C_ADDR), + .platform_data =3D &rx51_adp1653_platform_data, + }, +}; + +static struct isp_subdev_i2c_board_info rx51_camera_primary_subdevs[] =3D { + { + .board_info =3D &rx51_camera_i2c_devices[0], + .i2c_adapter_id =3D ADP1653_I2C_BUS_NUM, + }, + { NULL, 0, }, +}; + +static struct isp_v4l2_subdevs_group rx51_camera_subdevs[] =3D { + { + .subdevs =3D rx51_camera_primary_subdevs, + .interface =3D ISP_INTERFACE_CCP2B_PHY1, + .bus =3D { .ccp2 =3D { + .strobe_clk_pol =3D 0, + .crc =3D 1, + .ccp2_mode =3D 1, + .phy_layer =3D 1, + .vpclk_div =3D 1, + } }, + }, + { NULL, 0, }, +}; + +static struct isp_platform_data rx51_isp_platform_data =3D { + .subdevs =3D rx51_camera_subdevs, +}; + +void __init rx51_camera_init(void) +{ + if (rx51_camera_hw_init()) { + printk(KERN_WARNING "%s: Unable to initialize camera\n", + __func__); + return; + } + + if (omap3_init_camera(&rx51_isp_platform_data) < 0) + printk(KERN_WARNING "%s: Unable to register camera platform " + "device\n", __func__); +} diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index be0f62b..268fa57 100644 =2D-- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -286,6 +287,7 @@ config MACH_NOKIA_RX51 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select VIDEO_ADP1653 if VIDEO_OMAP3 && VIDEO_HELPER_CHIPS_AUTO =20 config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index c8b6ff3..df78c58 100644 =2D-- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -239,6 +239,7 @@ obj-$(CONFIG_MACH_NOKIA_RM680) +=3D board-rm680.o sdra= m-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) +=3D board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) +=3D board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) +=3D board-rx51-video.o +obj-$(CONFIG_MACH_NOKIA_RX51) +=3D board-rx51-camera.o obj-$(CONFIG_MACH_OMAP_ZOOM2) +=3D board-zoom.o board-zoom-peripherals.o obj-$(CONFIG_MACH_OMAP_ZOOM2) +=3D board-zoom-display.o obj-$(CONFIG_MACH_OMAP_ZOOM2) +=3D board-zoom-debugboard.o =2D-=20 Pali Roh=C3=A1r pali.rohar@gmail.com --nextPart1961998.jPWA2rUJ6Z Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEABECAAYFAlEg9GIACgkQi/DJPQPkQ1KvYgCghtGRtb7NH74k18BdIp5JS/z6 HgoAn3qpmCGSlVdThx3UW/IHXFjcKCrv =ko56 -----END PGP SIGNATURE----- --nextPart1961998.jPWA2rUJ6Z--