linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC 0/8]: omap4: clk: move clock data under drivers/clk
@ 2013-03-21 17:35 Tero Kristo
  2013-03-21 17:35 ` [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks Tero Kristo
                   ` (7 more replies)
  0 siblings, 8 replies; 15+ messages in thread
From: Tero Kristo @ 2013-03-21 17:35 UTC (permalink / raw)
  To: linux-omap, tony, khilman, paul; +Cc: linux-arm-kernel

Hi,

This is an RFC version of the clock data move under drivers/clk.
Tested under 3.8 and boots fine, but don't try this out unless
you are experimental sort (I quickly tried with 3.9-rc3 and it failed to
boot with that.)

The approach taken here has minimal impact on the clock data
and should make it easy to transfer clock data for omap2 / omap3 and
omap5 also. omap4 was only done as a proof of concept.

Any comments appreciated.

-Tero


^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2013-03-22 20:01 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-21 17:35 [RFC 0/8]: omap4: clk: move clock data under drivers/clk Tero Kristo
2013-03-21 17:35 ` [RFC 1/8] RFC: CLK: OMAP: Add basic infrastructure for OMAP clocks Tero Kristo
2013-03-21 18:50   ` Mike Turquette
2013-03-22  8:39     ` Tero Kristo
2013-03-22 16:47       ` Mike Turquette
2013-03-22 18:39         ` Tero Kristo
2013-03-22 20:01           ` Mike Turquette
2013-03-21 17:35 ` [RFC 3/8] CLK: OMAP4: Clock header register declarations to struct Tero Kristo
2013-03-21 17:35 ` [RFC 4/8] CLK: OMAP4: copy over cclock44xx_data.c file from mach-omap2 Tero Kristo
2013-03-21 17:35 ` [RFC 5/8] CLK: OMAP4: modify clock data layout for the new driver format Tero Kristo
2013-03-21 17:35 ` [RFC 6/8] CLK: OMAP4: add support for the new clock init code Tero Kristo
2013-03-21 17:35 ` [RFC 7/8] clk: use strncmp for matching con_id in clk_find Tero Kristo
2013-03-21 17:35 ` [RFC 8/8] ARM: OMAP4: use new driver for omap4 clock data Tero Kristo
2013-03-22  5:28 ` [RFC 0/8]: omap4: clk: move clock data under drivers/clk Rajendra Nayak
2013-03-22  9:32   ` Tero Kristo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).