From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data Date: Thu, 13 Jun 2013 22:47:20 -0700 Message-ID: <20130614054720.GL8164@atomide.com> References: <1368796954-3499-1-git-send-email-kishon@ti.com> <51A43E0A.8090201@ti.com> <51B9C3B6.1080707@ti.com> <51BAABB0.5060107@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <51BAABB0.5060107@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: Kishon Vijay Abraham I Cc: Tomi Valkeinen , balbi@ti.com, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux@arm.linux.org.uk, eballetbo@gmail.com, javier@dowhile0.org, gregkh@linuxfoundation.org List-Id: linux-omap@vger.kernel.org * Kishon Vijay Abraham I [130613 22:41]: > Hi, > > On Thursday 13 June 2013 06:35 PM, Tomi Valkeinen wrote: > >Hi, > > > >On 28/05/13 08:18, Kishon Vijay Abraham I wrote: > >>Hi Tony, > >> > >>On Friday 17 May 2013 06:52 PM, Kishon Vijay Abraham I wrote: > >>>In order for controllers to get PHY in case of non dt boot, the phy > >>>binding information (phy label) should be added in the platform > >>>data of the controller. > >> > >>This series would be needed to get MUSB working in OMAP3 boards for > >>non-dt boot case. Do you think this is good enough to go in this rc cycle? > > > >Did this or some other solution go forward? I'm still unable to boot > >with usb-gadget-ethernet with v3.10-rc5. > > No. I think Tony is ok to take this only during next merge window. Yes I'll apply them to omap-for-v3.11/fixes-non-critical. We really should have basic functionaly tested and working always before the merge window so we only need to do minimal fixes during the -rc cycle. Regards, Tony