From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c Date: Tue, 18 Jun 2013 04:27:01 -0700 Message-ID: <20130618112701.GO5523@atomide.com> References: <20130612171407.GM8164@atomide.com> <51B98F1E.1000006@ti.com> <51B99B07.1050806@ti.com> <51BEBDCD.3060104@ti.com> <87ppvlqhyy.fsf@lebrac.rtp-net.org> <20130617082458.GH20992@atomide.com> <87li69qdcs.fsf@lebrac.rtp-net.org> <20130617102650.GK20992@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:11421 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752479Ab3FRL1F (ORCPT ); Tue, 18 Jun 2013 07:27:05 -0400 Content-Disposition: inline In-Reply-To: <20130617102650.GK20992@atomide.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Arnaud Patard Cc: Sricharan R , Ming Lei , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mike Turquette * Tony Lindgren [130617 03:32]: > * Arnaud Patard [130617 02:52]: > > Tony Lindgren writes: > > > > I understand your concerns but, please, cope with reality: the clock > > work is not in -next so this tends to make me think it won't reach > > 3.11. We're at -rc6 after all. Telling users that their system doesn't > > have any network because it was easier to maintain, is not something > > they will understand imho. > > Right, like I said: the idea is to have it usable with DT. And USB and > Ethernet certainly are part of what I call usable. So is MMC, WLAN and > DSS. I've certainly spent quite a bit of time on making sure panda works > with DT, and I can assure you that fixing the USB extclock is easier than > supporting the legacy boot with DT :) > > This issue can also be fixed with a clock alias if we don't have DT > defined clocks ready for v3.11. It may take a few days for us to have > the solution. But get getting a clock to a driver certainly is not a > showstopper here. After all, that's what all drivers already do. Care to test the last patch just posted by Roger in thread " [PATCH 0/4] ARM: OMAP4: Panda USB Host support and DVI EDID fix"? That adds a clock alias for the EHCI auxclk so it should continue working until we have the DT clock patches available. Regards, Tony