From: Sebastian Reichel <sre@ring0.de>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, freemangordon@abv.bg,
aaro.koskinen@iki.fi, pavel@ucw.cz
Subject: Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
Date: Mon, 23 Sep 2013 22:00:09 +0200 [thread overview]
Message-ID: <20130923200008.GA21808@earth.universe> (raw)
In-Reply-To: <201309232116.19161@pali>
[-- Attachment #1: Type: text/plain, Size: 983 bytes --]
On Mon, Sep 23, 2013 at 09:16:18PM +0200, Pali Rohár wrote:
> It is not as simple as it looks. This is reason why I submited
> this patch long time after I submited bq2415x driver.
>
> Problem is that for rx51 is needed specific function which connect
> to two drivers (bq2415x and isp1704) plus it call specific rx51
> board functions.
>
> Something which cannot be in DT (unless DT support C/ASM code).
mh could isp1704 driver expose the data via the regulator framework?
Then the bq2415x chip can just use the regulator framework. This
should make converting to DT easy (by giving the bq2415x chip the
isp1704 as regulator) and uses existing standard interfaces.
> Patches for modem support are being prepared for upstreaming :-)
> so after that it is up to you to create "call" script as you want
I'm on it. RFC round will be sent out this week. It seems
hwmod data is already finished, since i didn't get feedback for
that patch :)
-- Sebastian
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-09-23 20:00 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-08 8:50 [PATCH 0/4] Add support for charging battery in Nokia RX-51 Pali Rohár
2013-09-08 8:50 ` [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed Pali Rohár
2013-09-17 15:48 ` Felipe Balbi
2013-09-17 15:49 ` Felipe Balbi
2013-09-17 16:05 ` Pali Rohár
2013-09-17 16:08 ` Felipe Balbi
2013-09-17 19:28 ` Pali Rohár
2013-09-18 1:49 ` Felipe Balbi
2013-09-18 8:20 ` Pali Rohár
2013-09-18 9:04 ` Javier Martinez Canillas
2013-09-18 13:30 ` Pavel Machek
2013-09-18 13:57 ` Javier Martinez Canillas
2013-09-18 14:22 ` Pavel Machek
2013-09-18 14:35 ` Pavel Machek
2013-09-18 16:25 ` Felipe Balbi
2013-09-18 14:53 ` Javier Martinez Canillas
2013-09-18 15:56 ` Pali Rohár
2013-09-18 16:36 ` Felipe Balbi
2013-09-18 16:43 ` Pali Rohár
2013-09-18 16:48 ` Felipe Balbi
2013-09-18 17:03 ` [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD Pali Rohár
2013-09-25 8:17 ` Pali Rohár
2013-09-25 20:33 ` Felipe Balbi
2013-09-26 0:00 ` Pavel Machek
2013-10-01 14:22 ` Felipe Balbi
2013-09-18 17:03 ` [PATCH usb 2/2] usb: musb: Call atomic_notifier_call_chain when status is changed Pali Rohár
2013-09-08 8:50 ` [PATCH 2/4] power: isp1704_charger: Fix driver to work with changes introduced in v3.5 Pali Rohár
2013-10-22 21:03 ` Anton Vorontsov
2013-09-08 8:50 ` [PATCH 3/4] power: isp1704_charger: Add callback function set_current Pali Rohár
2013-09-08 8:50 ` [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger Pali Rohár
2013-09-09 13:39 ` Sebastian Reichel
2013-09-20 19:22 ` Pali Rohár
2013-09-23 18:03 ` Tony Lindgren
2013-09-23 19:16 ` Pali Rohár
2013-09-23 20:00 ` Sebastian Reichel [this message]
2013-09-23 20:06 ` Pali Rohár
2013-09-23 20:47 ` Sebastian Reichel
2013-09-23 23:11 ` Tony Lindgren
2013-09-24 0:05 ` Pavel Machek
2013-09-24 17:05 ` Pali Rohár
2013-09-24 20:50 ` Sebastian Reichel
2013-09-14 9:38 ` [PATCH 0/4] Add support for charging battery in Nokia RX-51 Pali Rohár
2013-09-21 13:42 ` Pali Rohár
2013-11-19 10:18 ` [PATCH v2 0/3] " Pali Rohár
2013-11-19 10:18 ` [PATCH v2 1/3] power_supply: Add power_supply notifier Pali Rohár
2013-11-19 13:10 ` Pavel Machek
2013-11-19 13:19 ` Pali Rohár
2013-11-24 17:02 ` Sebastian Reichel
2013-11-27 17:23 ` Tc, Jenny
2013-12-01 22:20 ` Anton Vorontsov
2013-12-01 22:23 ` Anton Vorontsov
2014-01-03 11:09 ` Tc, Jenny
2014-01-03 16:02 ` Anton Vorontsov
2013-11-19 10:18 ` [PATCH v2 2/3] bq2415x_charger: Use power_supply notifier for automode Pali Rohár
2013-11-19 13:24 ` Pavel Machek
2013-12-24 1:58 ` Anton Vorontsov
2013-11-24 17:00 ` Sebastian Reichel
2013-11-24 19:01 ` Pali Rohár
2013-11-24 19:26 ` Sebastian Reichel
2013-11-24 19:41 ` Pali Rohár
2013-11-24 21:00 ` Sebastian Reichel
2013-11-25 14:01 ` Pavel Machek
2013-11-25 14:10 ` Pali Rohár
2013-11-25 15:18 ` Pavel Machek
2013-11-25 18:52 ` Pali Rohár
2013-11-24 17:18 ` Michael Trimarchi
2013-11-24 19:01 ` Pali Rohár
2013-11-25 19:16 ` Michael Trimarchi
2013-12-01 22:37 ` Anton Vorontsov
2013-12-02 0:02 ` Michael Trimarchi
2013-12-02 0:24 ` Anton Vorontsov
2013-12-02 1:45 ` Michael Trimarchi
2014-01-19 20:54 ` Sebastian Reichel
2014-01-19 20:56 ` Michael Trimarchi
2014-01-20 10:21 ` Russell King - ARM Linux
2014-01-20 11:24 ` Sebastian Reichel
2013-12-06 13:32 ` Pali Rohár
2013-11-19 10:18 ` [PATCH v2 3/3] RX-51: Add platform data for bq24150a charger Pali Rohár
2013-11-19 13:32 ` Pavel Machek
2013-11-24 10:28 ` Pali Rohár
2013-11-19 14:44 ` [PATCH v2 0/3] Add support for charging battery in Nokia RX-51 Sebastian Reichel
2013-11-19 15:40 ` Tony Lindgren
2013-11-19 21:38 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130923200008.GA21808@earth.universe \
--to=sre@ring0.de \
--cc=aaro.koskinen@iki.fi \
--cc=freemangordon@abv.bg \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).