Re: [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt

[Tony Lindgren <tony@atomide.com>]

Hi,

* Andreas Fenkart <afenkart@gmail.com> [130926 01:34]:
> 2013/9/26 Tony Lindgren <tony@atomide.com>:
> > @@ -463,27 +469,34 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
> >  static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
> >                                   struct mmc_command *cmd)
> >  {
> > -       unsigned int irq_mask;
> > +       u32 irq_mask = INT_EN_MASK;
> > +       unsigned long flags;
> >
> >         if (host->use_dma)
> > -               irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN);
> > -       else
> > -               irq_mask = INT_EN_MASK;
> > +               irq_mask &= ~(BRR_EN | BWR_EN);
> >
> >         /* Disable timeout for erases */
> >         if (cmd->opcode == MMC_ERASE)
> >                 irq_mask &= ~DTO_EN;
> >
> > +       spin_lock_irqsave(&host->irq_lock, flags);
> >         OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
> >         OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
> > +       if (host->flags & HSMMC_SDIO_IRQ_ENABLED)
> > +               irq_mask |= CIRQ_EN;
> >         OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
> > +       spin_unlock_irqrestore(&host->irq_lock, flags);
> >  }
> >
> >  static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host)
> >  {
> > +       unsigned long flags;
> > +
> > +       spin_lock_irqsave(&host->irq_lock, flags);
> >         OMAP_HSMMC_WRITE(host->base, ISE, 0);
> >         OMAP_HSMMC_WRITE(host->base, IE, 0);
> >         OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
> 
> This is wrong. SDIO IRQ must not be disabled upon host initiated transfer.
> see omap_hsmmc_request_done

Hmm I don't quite follow you here, are you saying that
omap_hsmmc_request_done() should call this conditionally?

Or maybe even do a patch on top of this based on what you discovered
with your earlier patches?

I know we don't have the remuxing support yet, but that has
dependencies to the pending pinctrl wake-up handling in general,
and pinctrl state grouping. So let's remove those dependencies
for now and get the basics going first before moving on to
the remuxing part :)
 
> > +       spin_unlock_irqrestore(&host->irq_lock, flags);
> >  }
> >
> >  /* Calculate divisor for the given clock frequency */
> > @@ -1040,8 +1053,12 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
> >         int status;
> >
> >         status = OMAP_HSMMC_READ(host->base, STAT);
> > -       while (status & INT_EN_MASK && host->req_in_progress) {
> > -               omap_hsmmc_do_irq(host, status);
> > +       while (status & (INT_EN_MASK | CIRQ_EN)) {
> > +               if (host->req_in_progress)
> > +                       omap_hsmmc_do_irq(host, status);
> > +
> > +               if (status & CIRQ_EN)
> > +                       mmc_signal_sdio_irq(host->mmc);
> >
> >                 /* Flush posted write */
> >                 status = OMAP_HSMMC_READ(host->base, STAT);
> > @@ -1556,6 +1573,43 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
> >                 mmc_slot(host).init_card(card);
> >  }
> >
> > +static void omap_hsmmc_enable_sdio_irq_nolock(struct omap_hsmmc_host *host,
> > +                                        int enable)
> > +{
> > +       u32 irq_mask;
> > +
> > +       if (enable)
> > +               host->flags |= HSMMC_SDIO_IRQ_ENABLED;
> > +       else
> > +               host->flags &= ~HSMMC_SDIO_IRQ_ENABLED;
> > +
> > +       /* SDIO IRQ will be enabled as appropriate in runtime resume */
> > +       if (host->flags & HSMMC_RUNTIME_SUSPENDED)
> > +               goto out;
> 
> Not sure here, will the module still come out of suspend even with
> SDIO IRQ disabled?
> Otherwise nak, sdio irq must enabled independent of pm runtime state. In the
> worst case need pm_runtime_get().

Well this handling is similar to what's done in sdhci.c and
seems to work for me for off-idle on 3730. In that case the
whole MMC block is powered off and the wake up follows the
dedicated io chain path. For the am33xx off-idle case, the
wake-up path would be remuxed to the GPIO in the first GPIO
bank that's always on, so again the whole MMC block is off.

Maybe try to test this with your case with some additional
patches?

> >  static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
> >  {
> >         u32 hctl, capa, value;
> > @@ -1608,7 +1662,7 @@ static const struct mmc_host_ops omap_hsmmc_ops = {
> >         .get_cd = omap_hsmmc_get_cd,
> >         .get_ro = omap_hsmmc_get_ro,
> >         .init_card = omap_hsmmc_init_card,
> > -       /* NYET -- enable_sdio_irq */
> > +       .enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
> 
> What about am335x, if this patch goes in, it will break that platform.
> quirk flag via device tree?

I think it should still work, except the wake-up won't work for
the off-idle case unless the SDIO interrupt is remux to the
GPIO input?

If there are other issues then yes, we can use the compatible
flags.

Thanks for the review and comments, 

Tony