Re: [RFC 14/23] USB: ehci-omap: raw read and write endian fix

[Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1642 bytes --]

On Sat, Nov 16, 2013 at 02:01:17AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

> ---
>  drivers/usb/host/ehci-omap.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 6fa82d6..803e706 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -73,12 +73,12 @@ struct omap_hcd {
>  
>  static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
>  {
> -	__raw_writel(val, base + reg);
> +	writel_relaxed(val, base + reg);
>  }
>  
>  static inline u32 ehci_read(void __iomem *base, u32 reg)
>  {
> -	return __raw_readl(base + reg);
> +	return readl_relaxed(base + reg);
>  }
>  
>  /* configure so an HC device and id are always provided */
> -- 
> 1.7.9.5
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]