Re: [PATCH v2 2/3] bq2415x_charger: Use power_supply notifier for automode

["Pali Rohár" <pali.rohar@gmail.com>]

[-- Attachment #1: Type: Text/Plain, Size: 2018 bytes --]

On Sunday 24 November 2013 18:18:03 Michael Trimarchi wrote:
> Hi
> 
> On Tue, Nov 19, 2013 at 11:18 AM, Pali Rohár 
<pali.rohar@gmail.com> wrote:
> > This patch removing set_mode_hook function from board data
> > and replacing it with new string variable of notifier power
> > supply device. After this change it is possible to add DT
> > support because driver does not need specific board
> > function anymore. Only static data and name of power supply
> > device is required.
> > 
> > Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> > ---
> > 
> >  drivers/power/bq2415x_charger.c       |   77
> >  +++++++++++++++++++++++++--------
> >  include/linux/power/bq2415x_charger.h |   48
> >  +++----------------- 2 files changed, 65 insertions(+), 60
> >  deletions(-)
> > 
...
> > 
> > -       struct bq2415x_device *bq = data;
> > +       struct bq2415x_device *bq =
> > +               container_of(nb, struct bq2415x_device, nb);
> > +       struct power_supply *psy = v;
> > +       enum bq2415x_mode mode;
> > +       union power_supply_propval prop;
> > +       int ret;
> > +       int mA;
> > 
> > -       if (!bq)
> > -               return;
> > +       if (val != PSY_EVENT_PROP_CHANGED)
> > +               return NOTIFY_OK;
> > +
> > +       if (strcmp(psy->name, bq->init_data.notify_device)
> > != 0) +               return NOTIFY_OK;
> > +
> > +       dev_dbg(bq->dev, "notifier call was called\n");
> > +
> > +       ret = psy->get_property(psy,
> > POWER_SUPPLY_PROP_CURRENT_MAX, &prop); +       if (ret !=
> > 0)
> > +               return NOTIFY_OK;
> 
> So you can read this value without any type of synchronization
> with the power_supply_core
> and sysfs implementation?
> 
> 
> Michael
> 

I do not see reason why I cannot use it. When isp1704 driver send 
PSY_EVENT_PROP_CHANGED then property 
POWER_SUPPLY_PROP_CURRENT_MAX is already updated and can be read 
by get_property function.

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]