From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] omap: twl-common: Fix musb-hdrc device name. Date: Mon, 9 Dec 2013 09:50:06 -0800 Message-ID: <20131209175006.GD12527@atomide.com> References: <1386059589-4030-1-git-send-email-marek.belisko@open-nandra.com> <529D9D43.6040101@ti.com> <20131205184323.GF26766@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Belisko Marek Cc: Kishon Vijay Abraham I , Russell King - ARM Linux , linux-arm-kernel , "linux-omap@vger.kernel.org" , LKML , "Dr. H. Nikolaus Schaller" List-Id: linux-omap@vger.kernel.org * Belisko Marek [131208 23:36]: > Hi Tony, > > On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren wrote: > > * Belisko Marek [131203 01:21]: > >> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek wrote: > >> > Hi, > >> > > >> > On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I wrote: > >> >> Hi, > >> >> > >> >> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote: > >> >>> Without this change when booting omap3 device (gta04) with board file > >> >>> leads to follwing errors: > >> >>> > >> >>> [ 1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy > >> >>> [ 1.209075] HS USB OTG: no transceiver configured > >> >>> [ 1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 > >> >>> > >> >>> and usb isn't working. > >> >>> > >> >>> This is probably regression caused by commit: 6c27f939 > >> >> > >> >> I think a better fix would be to have this merged.. > >> >> https://lkml.org/lkml/2013/7/26/91 > >> > Yes I see but how this could help with current situation? Ho you then > >> > specify device number? > >> I was too fast with reply sorry. I can see whole series and it is of > >> course correct solution. But as I said > >> can we except to be merged to 3.13. If not Tony can you pick my patch. > > > > If it's a regression, then let's get it merged for the -rc cycle. > Yes it is regression and without that usb on most omap3 based boards > without DT will not work. > > > > So please try to follow up on getting the proper fix merged, meanwhile > > I'll mark this thread as read. If you need this one merged for some > > reason, then please report to get it back to my radar. I'm still clueless which USB regression fix to apply for the -rc cycle though.. Hoping to see a single patch which clearly states the issue and has acks. Regards, Tony