From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnd Bergmann Subject: Re: [PATCH v3 1/4] ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module Date: Tue, 7 Jan 2014 16:13:38 +0100 Message-ID: <201401071613.39245.arnd@arndb.de> References: <1389096889-22179-1-git-send-email-rogerq@ti.com> <1389096889-22179-2-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1389096889-22179-2-git-send-email-rogerq@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, tony@atomide.com, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, balbi@ti.com, bcousson@baylibre.com, linux-omap@vger.kernel.org, Roger Quadros List-Id: linux-omap@vger.kernel.org On Tuesday 07 January 2014, Roger Quadros wrote: > USB Host driver (drivers/mfd/omap-usb-host.c) expects the 60MHz > reference clock to be named "init_60m_fclk". Provide this > information. > > Signed-off-by: Roger Quadros > --- > arch/arm/boot/dts/omap5.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index 2f12a47..e0ab379 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -765,6 +765,8 @@ > #address-cells = <1>; > #size-cells = <1>; > ranges; > + clocks = <&l3init_60m_fclk>; > + clock-names = "init_60m_fclk"; > > usbhsohci: ohci@4a064800 { > compatible = "ti,ohci-omap3", "usb-ohci"; The bindings/mfd/omap-usb-host.txt file doesn't document any clocks. Please create another patch to document the clock names in this binding before you start putting them into the dtsi file. So far the clock names are an implementation detail of Linux as they are not part of the binding, and with your patch it becomes part of the ABI. Arnd