From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 0/7] ARM: dts: overo: Add new expansion boards Date: Wed, 12 Mar 2014 10:22:48 -0700 Message-ID: <20140312172247.GC30897@atomide.com> References: <1394540435-25401-1-git-send-email-florian.vaussard@epfl.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:50405 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756103AbaCLRW4 (ORCPT ); Wed, 12 Mar 2014 13:22:56 -0400 Content-Disposition: inline In-Reply-To: <1394540435-25401-1-git-send-email-florian.vaussard@epfl.ch> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Florian Vaussard Cc: Benoit Cousson , Roger Quadros , Nishanth Menon , Ash Charles , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org * Florian Vaussard [140311 05:24]: > Hi, > > This series adds the support for 5 new expansion boards from Gumstix: > - Palo43 > - Gallop43 > - Chestnut43 > - Alto35 > - Summit > > The 1st patch is a preparatory work, in order to factorize some > peripherals that are common to most Gumstix expansion boards. Patch 2 > adds the support for an accelerometer that is present on most boards. > > Palo43, Gallop43 and Chestnut43 are all pretty similar. I tested > on a Gallop43 (with both OMAP35xx and OMAP36xx Overo). > > Alto35 is slightly different. Again, I tested with both OMAP35xx and > OMAP36xx Overo. > > Summit is pretty similar to Tobi. I do not have a Summit at hand, > but given the similarity with Tobi, it should work fine. > > To avoid unnecessary duplications, I put all the common stuff for each > board inside an omap3-overo-xxx-common.dsti include file. By doing so, > I can have minimal SoC-specific omap3-overo-xxx.dts (omap34xx based) > and omap3-overo-storm-xxx.dts (omap36xx based) device trees. > > This series depends on my previous Overo series [1]. A complete testing > tree (including the graphics support, soon to be posted) is available > at [2]. Thanks, applying the whole series into omap-for-v3.15/dt-overo. As it's this close to the merge window, no guarantees anything will get pulled in though. Regards, Tony > [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/111558 > [2] https://github.com/vaussard/linux.git (overo/for-3.15/review1)