Re: [PATCH v5 3/5] ARM: dts: AM4372: Add USB nodes

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 3517 bytes --]

On Wed, Mar 19, 2014 at 03:40:01PM +0530, George Cherian wrote:
> Add nodes for 2 instances each of
> 	- ocp2scp
> 	- USB PHY control module
> 	- USB PHY
> 	- dwc3_omap
> 	- USB
> 
> for AM43xx.
> 
> Signed-off-by: George Cherian <george.cherian@ti.com>
> Acked-by: Roger Quadros <rogerq@ti.com>

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  arch/arm/boot/dts/am4372.dtsi | 94 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 94 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 36d523a..cedb9d4 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -735,6 +735,100 @@
>  			#size-cells = <1>;
>  			status = "disabled";
>  		};
> +
> +		am43xx_control_usb2phy1: control-phy@44e10620 {
> +			compatible = "ti,control-phy-usb2-am437";
> +			reg = <0x44e10620 0x4>;
> +			reg-names = "power";
> +		};
> +
> +		am43xx_control_usb2phy2: control-phy@0x44e10628 {
> +			compatible = "ti,control-phy-usb2-am437";
> +			reg = <0x44e10628 0x4>;
> +			reg-names = "power";
> +		};
> +
> +		ocp2scp0: ocp2scp@483a8000 {
> +			compatible = "ti,omap-ocp2scp";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "ocp2scp0";
> +
> +			usb2_phy1: phy@483a8000 {
> +				compatible = "ti,am437x-usb2";
> +				reg = <0x483a8000 0x8000>;
> +				ctrl-module = <&am43xx_control_usb2phy1>;
> +				clocks = <&usb_phy0_always_on_clk32k>,
> +					 <&usb_otg_ss0_refclk960m>;
> +				clock-names = "wkupclk", "refclk";
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		ocp2scp1: ocp2scp@483e8000 {
> +			compatible = "ti,omap-ocp2scp";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "ocp2scp1";
> +
> +			usb2_phy2: phy@483e8000 {
> +				compatible = "ti,am437x-usb2";
> +				reg = <0x483e8000 0x8000>;
> +				ctrl-module = <&am43xx_control_usb2phy2>;
> +				clocks = <&usb_phy1_always_on_clk32k>,
> +					 <&usb_otg_ss1_refclk960m>;
> +				clock-names = "wkupclk", "refclk";
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		dwc3_1: omap_dwc3@48380000 {
> +			compatible = "ti,am437x-dwc3";
> +			ti,hwmods = "usb_otg_ss0";
> +			reg = <0x48380000 0x10000>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			utmi-mode = <1>;
> +			ranges;
> +
> +			usb1: usb@48390000 {
> +				compatible = "synopsys,dwc3";
> +				reg = <0x48390000 0x17000>;
> +				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb2_phy1>;
> +				phy-names = "usb2-phy";
> +				maximum-speed = "high-speed";
> +				dr_mode = "otg";
> +				status = "disabled";
> +			};
> +		};
> +
> +		dwc3_2: omap_dwc3@483c0000 {
> +			compatible = "ti,am437x-dwc3";
> +			ti,hwmods = "usb_otg_ss1";
> +			reg = <0x483c0000 0x10000>;
> +			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			utmi-mode = <1>;
> +			ranges;
> +
> +			usb2: usb@483d0000 {
> +				compatible = "synopsys,dwc3";
> +				reg = <0x483d0000 0x17000>;
> +				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb2_phy2>;
> +				phy-names = "usb2-phy";
> +				maximum-speed = "high-speed";
> +				dr_mode = "otg";
> +				status = "disabled";
> +			};
> +		};
>  	};
>  };
>  
> -- 
> 1.8.3.1
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]