From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] ARM: OMAP2+: l2c: squelch warning dump on power control setting Date: Mon, 7 Jul 2014 04:02:50 -0700 Message-ID: <20140707110249.GO28884@atomide.com> References: <3c3a7a4861df01d0163787a9c18f7b7ac821c5b9.1403000372.git.nsekhar@ti.com> <20140617131935.GB9070@saruman.home> <20140701194704.GG13396@saruman.home> <20140702081142.GU28884@atomide.com> <20140707104727.GM28884@atomide.com> <20140707104944.GS3705@n2100.arm.linux.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:18847 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752462AbaGGLCu (ORCPT ); Mon, 7 Jul 2014 07:02:50 -0400 Content-Disposition: inline In-Reply-To: <20140707104944.GS3705@n2100.arm.linux.org.uk> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Russell King - ARM Linux Cc: Felipe Balbi , Sekhar Nori , Linux OMAP Mailing List , Linux ARM Mailing List , Nishanth Menon , Santosh Shilimkar * Russell King - ARM Linux [140707 03:51]: > On Mon, Jul 07, 2014 at 03:47:27AM -0700, Tony Lindgren wrote: > > That's now merged into v3.16-rc4, so applying this into > > omap-for-v3.16/fixes. > > I intentionally left the warning in the hope that someone would update > it to write to the register. > > From the comments in the patch, it seems that firmware doesn't provide > a method to do that, which is a tad annoying. So it seems.. Santosh, might be worth checking if this is set up the same way for all omaps? Or do some have extra commands for OMAP4_MON_L2X0_* for ROM code calls? Regards, Tony