From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Subject: Re: [PATCH] Removes FIXME message in usb.c Date: Tue, 8 Jul 2014 22:30:42 -0700 Message-ID: <20140709053042.GB8051@kroah.com> References: <1404871119-4324-1-git-send-email-xerofoify@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1404871119-4324-1-git-send-email-xerofoify@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Nicholas Krause Cc: balbi@ti.com, tony@atomide.com, linux@arm.linux.org.uk, linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-omap@vger.kernel.org On Tue, Jul 08, 2014 at 09:58:39PM -0400, Nicholas Krause wrote: > This patch removes a fixme message in this file:wq for setting the usb 2 I don't think you did this correctly :) > speed on the board to the correct level. We need to depend on the > bootloader for doing this as the wires may be shared for the other > things on the board with the usb chipset. > > Signed-off-by: Nicholas Krause > --- > arch/arm/mach-omap1/usb.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c > index 4118db5..172245a 100644 > --- a/arch/arm/mach-omap1/usb.c > +++ b/arch/arm/mach-omap1/usb.c > @@ -505,7 +505,7 @@ static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) > omap_cfg_reg(W5_USB2_SE0); > if (nwires != 3) > omap_cfg_reg(Y5_USB2_RCV); > - // FIXME omap_cfg_reg(USB2_SPEED); > + /* Depend on boatloader for USB speed to be stated for board */ Really? Is that correct? WHy?