From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: USB Ethernet gadget on Nokia n900 Date: Sun, 26 Oct 2014 22:55:48 +0100 Message-ID: <20141026215548.GA9004@amd> References: <20141019090107.GA19132@amd> <201410261212.46582@pali> <20141026211721.GA7351@amd> <201410262222.39892@pali> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <201410262222.39892@pali> Sender: linux-kernel-owner@vger.kernel.org To: Pali =?iso-8859-1?Q?Roh=E1r?= Cc: Aaro Koskinen , Felipe Balbi , sre@debian.org, sre@ring0.de, kernel list , linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org List-Id: linux-omap@vger.kernel.org > > I have root prepared on /dev/mmcblk0p6. I tried 3.17 with > > rx51_defconfig, but no, it refuses to mount it. > > > > VFS: Cannot open root device "mmcblk0p6" or ....: error -19. > > > > And then it proceeds to list mmcblk0p6 as one of available > > options > > > > :-(. > > > > Ideas welcome. > > Try to add rootdelay=30 or rootwait to kernel cmdline. I had rootdelay=3. Will try rootwait... no change. This is v3.17 with rx51_defconfig. CONFIG_MACH_NOKIA_RX51=y => device tree will not be used AFAICT. Now I'm back at 3.14 without device tree; same setup works there. I tried disabling RX51 support in 3.14 (to make it boot using device tree) but that did not work. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html