From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 0/5] ARM: OMAP2+: gpmc: configuration enhancements Date: Tue, 4 Nov 2014 09:49:08 -0800 Message-ID: <20141104174907.GC28170@atomide.com> References: <1413895309-9152-1-git-send-email-rogerq@ti.com> <20141030151036.GE2560@atomide.com> <5452582A.9060505@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:51237 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750796AbaKDRuK (ORCPT ); Tue, 4 Nov 2014 12:50:10 -0500 Content-Disposition: inline In-Reply-To: <5452582A.9060505@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Roger Quadros Cc: pekon@pek-sem.com, javier@dowhile0.org, linux-omap@vger.kernel.org * Roger Quadros [141030 08:25]: > On 10/30/2014 05:10 PM, Tony Lindgren wrote: > > * Roger Quadros [141021 05:43]: > >> Hi Tony, > >> > >> These patches address GPMC configuration issues and are for v3.19. > >> Patches based on v3.18-rc1. > >> > >> - Make sure to print a user visible error if a requested GPMC timing > >> configuration can't be met. > >> > >> - Don't create GPMC child device if a GPMC timing could not be set. > >> > >> - Always enable address lines A26-A11 for non-NAND devices. > >> > >> - Perform GPMC configuration as per recommended procedure i.e. > >> keep Chip Select disabled while changing GPMC configuration. > >> > >> Tested on dra7-evm, am437x-gp-evm and beagleboard. > > > > For all these, please feel free to add: > > > > Acked-by: Tony Lindgren > > > > Thanks. These patches are now available at > > git@github.com:rogerq/linux.git for-v3.19/gpmc-omap > Merged these on top of the patches I did to omap-for-v3.19/gpmc. There were few merge conflicts so you may want to check. Regards, Tony