From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: USB OTG doesn't work in HOST mode on OMAP3 processor on 3.18-rc5 Date: Wed, 19 Nov 2014 09:53:49 -0800 Message-ID: <20141119175348.GK7046@atomide.com> References: <20141117180413.GF7046@atomide.com> <20141118154204.GI7046@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:44623 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756094AbaKSRyH (ORCPT ); Wed, 19 Nov 2014 12:54:07 -0500 Content-Disposition: inline In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Enric Balletbo Serra Cc: "linux-usb@vger.kernel.org" , linux-omap@vger.kernel.org, balbi@ti.com * Enric Balletbo Serra [141119 03:14]: > 2014-11-18 16:42 GMT+01:00 Tony Lindgren : > > Checked again, and no luck. It's very weird because from the OTG point > of view, OTG is exactly the same between Beagleboard-XM and IGEPv2. > > Can you confirm that you're using kernel 3.18-rc5 without other > patches applied ? At this moment, I don't have a Beagleboard-XM to > test, I'll try to get one because at this moment I'm a bit stuck with > this problem. Yes it was with v3.18-rc5 and the defconfig patch I posted except I had to disable all the other MUSB platforms. Also tested it with built in modules. Maybe you need to check the .dts pinctrl entries for hsusb0_* lines? Regards, Tony