* [GIT PULL 2/2] omap prcm clean-up for v3.19
[not found] <pull-1415725783-562282>
2014-11-11 17:14 ` [GIT PULL 2/2] omap prcm clean-up for v3.19 Tony Lindgren
@ 2014-11-11 17:14 ` Tony Lindgren
2014-11-20 9:46 ` [GIT PULL 1/2] omap non-urgent fixes " Arnd Bergmann
[not found] ` <pull-1415725783-562282-2>
3 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2014-11-11 17:14 UTC (permalink / raw)
To: arm; +Cc: linux-omap, linux-arm-kernel
The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.19/prcm-cleanup
for you to fetch changes up to 61c8621e2bd14faad9b89ab2284955b28000bcd5:
ARM: OMAP2+: PRM: provide generic API for system reset (2014-10-27 08:39:26 -0700)
----------------------------------------------------------------
Clean-up series for omap PRCM (Power Reset Clock Module) from
Tero Kristo to move things a bit closer to becoming a proper
device driver.
----------------------------------------------------------------
Tero Kristo (26):
ARM: DRA7: PRM: add voltage processor check behind a prm_feature flag
ARM: AM43XX: PRM: use OMAP4 PRM driver
ARM: OMAP2/3: hwmod: merge wait_target_ready functions for omap2/3
ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready
ARM: OMAP4/AM33xx: add cm_init / cm_exit calls for AM33xx and OMAP4+
ARM: OMAP2+: CM: add common API for cm_wait_module_ready
ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
ARM: OMAP2+: CM: make clkdm_hwsup operations static
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
ARM: AM33xx: hwmod: remove am33xx specific module SoC opts
ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version
ARM: AM33xx: PRM: add support for prm_init
ARM: OMAP2+: PRM: add generic API for asserting hardware reset
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
ARM: OMAP2+: PRM: add generic API for checking hardreset status
ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
ARM: OMAP4: CM: make cminst direct register access functions static
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
ARM: AM33xx: PRM: move global warm reset implementation to driver
ARM: AM33xx: PRM: make direct register access functions static
ARM: OMAP4: PRM: make omap4_prm_read/write_inst_reg calls static
ARM: OMAP3: PRM: make PRCM interrupt handler related functions static
ARM: OMAP4: PRM: make PRCM interrupt handler related functions static
ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain
ARM: OMAP2+: PRM: provide generic API for system reset
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/am33xx-restart.c | 12 +-
arch/arm/mach-omap2/clock.c | 3 +-
arch/arm/mach-omap2/cm.h | 18 ++-
arch/arm/mach-omap2/cm1_44xx.h | 2 -
arch/arm/mach-omap2/cm1_54xx.h | 2 -
arch/arm/mach-omap2/cm1_7xx.h | 2 -
arch/arm/mach-omap2/cm2_44xx.h | 2 -
arch/arm/mach-omap2/cm2_54xx.h | 2 -
arch/arm/mach-omap2/cm2_7xx.h | 2 -
arch/arm/mach-omap2/cm2xxx.c | 17 ++-
arch/arm/mach-omap2/cm2xxx.h | 10 +-
arch/arm/mach-omap2/cm33xx.c | 61 ++++++---
arch/arm/mach-omap2/cm33xx.h | 37 +-----
arch/arm/mach-omap2/cm3xxx.c | 19 +--
arch/arm/mach-omap2/cm3xxx.h | 12 --
arch/arm/mach-omap2/cm44xx.c | 49 -------
arch/arm/mach-omap2/cm44xx.h | 3 +
arch/arm/mach-omap2/cm_44xx_54xx.h | 36 -----
arch/arm/mach-omap2/cm_common.c | 82 +++++++++++-
arch/arm/mach-omap2/cminst44xx.c | 80 ++++++-----
arch/arm/mach-omap2/cminst44xx.h | 43 ------
arch/arm/mach-omap2/io.c | 11 +-
arch/arm/mach-omap2/omap2-restart.c | 5 +-
arch/arm/mach-omap2/omap3-restart.c | 7 +-
arch/arm/mach-omap2/omap4-restart.c | 6 +-
arch/arm/mach-omap2/omap_hwmod.c | 248 ++++++++---------------------------
arch/arm/mach-omap2/prm.h | 16 +++
arch/arm/mach-omap2/prm2xxx.c | 6 +-
arch/arm/mach-omap2/prm2xxx.h | 1 -
arch/arm/mach-omap2/prm2xxx_3xxx.c | 19 ++-
arch/arm/mach-omap2/prm2xxx_3xxx.h | 9 +-
arch/arm/mach-omap2/prm33xx.c | 64 +++++++--
arch/arm/mach-omap2/prm33xx.h | 11 +-
arch/arm/mach-omap2/prm3xxx.c | 32 ++---
arch/arm/mach-omap2/prm3xxx.h | 16 ---
arch/arm/mach-omap2/prm44xx.c | 36 +++--
arch/arm/mach-omap2/prm44xx_54xx.h | 19 ---
arch/arm/mach-omap2/prm_common.c | 99 ++++++++++++++
arch/arm/mach-omap2/prminst44xx.c | 10 +-
arch/arm/mach-omap2/prminst44xx.h | 5 +-
41 files changed, 530 insertions(+), 586 deletions(-)
delete mode 100644 arch/arm/mach-omap2/cm44xx.c
delete mode 100644 arch/arm/mach-omap2/cm_44xx_54xx.h
delete mode 100644 arch/arm/mach-omap2/cminst44xx.h
^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL 2/2] omap prcm clean-up for v3.19
[not found] <pull-1415725783-562282>
@ 2014-11-11 17:14 ` Tony Lindgren
2014-11-11 17:14 ` Tony Lindgren
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2014-11-11 17:14 UTC (permalink / raw)
To: arm; +Cc: linux-omap, linux-arm-kernel
The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v3.19/prcm-cleanup
for you to fetch changes up to 61c8621e2bd14faad9b89ab2284955b28000bcd5:
ARM: OMAP2+: PRM: provide generic API for system reset (2014-10-27 08:39:26 -0700)
----------------------------------------------------------------
Clean-up series for omap PRCM (Power Reset Clock Module) from
Tero Kristo to move things a bit closer to becoming a proper
device driver.
----------------------------------------------------------------
Tero Kristo (26):
ARM: DRA7: PRM: add voltage processor check behind a prm_feature flag
ARM: AM43XX: PRM: use OMAP4 PRM driver
ARM: OMAP2/3: hwmod: merge wait_target_ready functions for omap2/3
ARM: AM33xx/OMAP4+: CM: remove cdoffs parameter from wait_module_idle/ready
ARM: OMAP4/AM33xx: add cm_init / cm_exit calls for AM33xx and OMAP4+
ARM: OMAP2+: CM: add common API for cm_wait_module_ready
ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
ARM: OMAP2+: CM: make clkdm_hwsup operations static
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
ARM: AM33xx: hwmod: remove am33xx specific module SoC opts
ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version
ARM: AM33xx: PRM: add support for prm_init
ARM: OMAP2+: PRM: add generic API for asserting hardware reset
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
ARM: OMAP2+: PRM: add generic API for checking hardreset status
ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
ARM: OMAP4: CM: make cminst direct register access functions static
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
ARM: AM33xx: PRM: move global warm reset implementation to driver
ARM: AM33xx: PRM: make direct register access functions static
ARM: OMAP4: PRM: make omap4_prm_read/write_inst_reg calls static
ARM: OMAP3: PRM: make PRCM interrupt handler related functions static
ARM: OMAP4: PRM: make PRCM interrupt handler related functions static
ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain
ARM: OMAP2+: PRM: provide generic API for system reset
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/am33xx-restart.c | 12 +-
arch/arm/mach-omap2/clock.c | 3 +-
arch/arm/mach-omap2/cm.h | 18 ++-
arch/arm/mach-omap2/cm1_44xx.h | 2 -
arch/arm/mach-omap2/cm1_54xx.h | 2 -
arch/arm/mach-omap2/cm1_7xx.h | 2 -
arch/arm/mach-omap2/cm2_44xx.h | 2 -
arch/arm/mach-omap2/cm2_54xx.h | 2 -
arch/arm/mach-omap2/cm2_7xx.h | 2 -
arch/arm/mach-omap2/cm2xxx.c | 17 ++-
arch/arm/mach-omap2/cm2xxx.h | 10 +-
arch/arm/mach-omap2/cm33xx.c | 61 ++++++---
arch/arm/mach-omap2/cm33xx.h | 37 +-----
arch/arm/mach-omap2/cm3xxx.c | 19 +--
arch/arm/mach-omap2/cm3xxx.h | 12 --
arch/arm/mach-omap2/cm44xx.c | 49 -------
arch/arm/mach-omap2/cm44xx.h | 3 +
arch/arm/mach-omap2/cm_44xx_54xx.h | 36 -----
arch/arm/mach-omap2/cm_common.c | 82 +++++++++++-
arch/arm/mach-omap2/cminst44xx.c | 80 ++++++-----
arch/arm/mach-omap2/cminst44xx.h | 43 ------
arch/arm/mach-omap2/io.c | 11 +-
arch/arm/mach-omap2/omap2-restart.c | 5 +-
arch/arm/mach-omap2/omap3-restart.c | 7 +-
arch/arm/mach-omap2/omap4-restart.c | 6 +-
arch/arm/mach-omap2/omap_hwmod.c | 248 ++++++++---------------------------
arch/arm/mach-omap2/prm.h | 16 +++
arch/arm/mach-omap2/prm2xxx.c | 6 +-
arch/arm/mach-omap2/prm2xxx.h | 1 -
arch/arm/mach-omap2/prm2xxx_3xxx.c | 19 ++-
arch/arm/mach-omap2/prm2xxx_3xxx.h | 9 +-
arch/arm/mach-omap2/prm33xx.c | 64 +++++++--
arch/arm/mach-omap2/prm33xx.h | 11 +-
arch/arm/mach-omap2/prm3xxx.c | 32 ++---
arch/arm/mach-omap2/prm3xxx.h | 16 ---
arch/arm/mach-omap2/prm44xx.c | 36 +++--
arch/arm/mach-omap2/prm44xx_54xx.h | 19 ---
arch/arm/mach-omap2/prm_common.c | 99 ++++++++++++++
arch/arm/mach-omap2/prminst44xx.c | 10 +-
arch/arm/mach-omap2/prminst44xx.h | 5 +-
41 files changed, 530 insertions(+), 586 deletions(-)
delete mode 100644 arch/arm/mach-omap2/cm44xx.c
delete mode 100644 arch/arm/mach-omap2/cm_44xx_54xx.h
delete mode 100644 arch/arm/mach-omap2/cminst44xx.h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 1/2] omap non-urgent fixes for v3.19
[not found] <pull-1415725783-562282>
2014-11-11 17:14 ` [GIT PULL 2/2] omap prcm clean-up for v3.19 Tony Lindgren
2014-11-11 17:14 ` Tony Lindgren
@ 2014-11-20 9:46 ` Arnd Bergmann
2014-11-20 16:03 ` Tony Lindgren
[not found] ` <pull-1415725783-562282-2>
3 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2014-11-20 9:46 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, arm, linux-arm-kernel
On Tuesday 11 November 2014, Tony Lindgren wrote:
> ----------------------------------------------------------------
> Fixes for omap3 that are not urgent. Mostly to remove unnecessary
> noise during the boot with pointless errors and warnings.
>
Pulled into next/fixes-non-critical. We didn't have any other patches in there,
so I started out with -rc3 to avoid the back-merge problem. Any reason why
you didn't base this on -rc1 like the other branches?
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 2/2] omap prcm clean-up for v3.19
[not found] ` <pull-1415725783-562282-2>
@ 2014-11-20 11:08 ` Arnd Bergmann
2014-11-20 15:52 ` Tony Lindgren
0 siblings, 1 reply; 6+ messages in thread
From: Arnd Bergmann @ 2014-11-20 11:08 UTC (permalink / raw)
To: Tony Lindgren; +Cc: arm, linux-omap, linux-arm-kernel
On Tuesday 11 November 2014, Tony Lindgren wrote:
> Clean-up series for omap PRCM (Power Reset Clock Module) from
> Tero Kristo to move things a bit closer to becoming a proper
> device driver.
Pulled into next/soc, as some of the changes seem slightly more invasive
than what I'd expect from a pure cleanup branch.
Please let me know if this needs to be put into cleanup instead because
some other patches are based on top.
Thanks,
Arnd
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 2/2] omap prcm clean-up for v3.19
2014-11-20 11:08 ` [GIT PULL 2/2] omap prcm clean-up " Arnd Bergmann
@ 2014-11-20 15:52 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2014-11-20 15:52 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: arm, linux-omap, linux-arm-kernel
* Arnd Bergmann <arnd@arndb.de> [141120 03:10]:
> On Tuesday 11 November 2014, Tony Lindgren wrote:
> > Clean-up series for omap PRCM (Power Reset Clock Module) from
> > Tero Kristo to move things a bit closer to becoming a proper
> > device driver.
>
> Pulled into next/soc, as some of the changes seem slightly more invasive
> than what I'd expect from a pure cleanup branch.
>
> Please let me know if this needs to be put into cleanup instead because
> some other patches are based on top.
OK next/soc is just fine for these.
Thanks,
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 1/2] omap non-urgent fixes for v3.19
2014-11-20 9:46 ` [GIT PULL 1/2] omap non-urgent fixes " Arnd Bergmann
@ 2014-11-20 16:03 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2014-11-20 16:03 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: arm, linux-omap, linux-arm-kernel
* Arnd Bergmann <arnd@arndb.de> [141120 01:48]:
> On Tuesday 11 November 2014, Tony Lindgren wrote:
> > ----------------------------------------------------------------
> > Fixes for omap3 that are not urgent. Mostly to remove unnecessary
> > noise during the boot with pointless errors and warnings.
> >
>
>
> Pulled into next/fixes-non-critical. We didn't have any other patches in there,
> so I started out with -rc3 to avoid the back-merge problem. Any reason why
> you didn't base this on -rc1 like the other branches?
I was probably originally planning to have the dmesg warning
and error fixes merged into omap-for-v3.18/fixes branch and
have that automatically fast forward to -rc3 without rebasing.
No other dependency that I can think of.
Regards,
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-11-20 16:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <pull-1415725783-562282>
2014-11-11 17:14 ` [GIT PULL 2/2] omap prcm clean-up for v3.19 Tony Lindgren
2014-11-11 17:14 ` Tony Lindgren
2014-11-20 9:46 ` [GIT PULL 1/2] omap non-urgent fixes " Arnd Bergmann
2014-11-20 16:03 ` Tony Lindgren
[not found] ` <pull-1415725783-562282-2>
2014-11-20 11:08 ` [GIT PULL 2/2] omap prcm clean-up " Arnd Bergmann
2014-11-20 15:52 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).