From: Apelete Seketeli <apelete@seketeli.net>
To: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <balbi@ti.com>,
linux-usb@vger.kernel.org, linux-omap@vger.kernel.org,
Fabio Baltieri <fabio.baltieri@linaro.org>,
Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH 5/8] usb: musb: Change end point selection to use new IO access
Date: Tue, 25 Nov 2014 00:38:35 +0100 [thread overview]
Message-ID: <20141124233835.GB14728@tao> (raw)
In-Reply-To: <1416855906-13931-6-git-send-email-tony@atomide.com>
Hi Tony,
Thanks for the patch.
On Mon, Nov-24-2014 at 11:05:03 AM -0800, Tony Lindgren wrote:
> This allows the endpoints to work when multiple MUSB glue
> layers are built in.
Applied on top of 3.18-rc6 mainline and tested successfully on JZ4740.
Been able to use ethernet-over-usb to access the internet on
device. No issue as far as I'm concerned.
Acked-by: Apelete Seketeli <apelete@seketeli.net>
> Cc: Fabio Baltieri <fabio.baltieri@linaro.org>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Apelete Seketeli <apelete@seketeli.net>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> drivers/usb/musb/am35x.c | 1 +
> drivers/usb/musb/da8xx.c | 1 +
> drivers/usb/musb/jz4740.c | 1 +
> drivers/usb/musb/musb_core.c | 38 +++++++++++++++++++++++++++++++++++++-
> drivers/usb/musb/musb_core.h | 37 +------------------------------------
> drivers/usb/musb/musb_dsps.c | 1 +
> drivers/usb/musb/musb_io.h | 2 ++
> drivers/usb/musb/musb_regs.h | 11 -----------
> drivers/usb/musb/musbhsdma.c | 7 ++++---
> drivers/usb/musb/tusb6010.c | 13 +++++++++++++
> drivers/usb/musb/ux500.c | 1 +
> 11 files changed, 62 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
> index 13d1d77..1ea4a67 100644
> --- a/drivers/usb/musb/am35x.c
> +++ b/drivers/usb/musb/am35x.c
> @@ -438,6 +438,7 @@ static void am35x_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
> }
>
> static const struct musb_platform_ops am35x_ops = {
> + .quirks = MUSB_INDEXED_EP,
> .init = am35x_musb_init,
> .exit = am35x_musb_exit,
>
> diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
> index 058775e..c9079c8 100644
> --- a/drivers/usb/musb/da8xx.c
> +++ b/drivers/usb/musb/da8xx.c
> @@ -458,6 +458,7 @@ static int da8xx_musb_exit(struct musb *musb)
> }
>
> static const struct musb_platform_ops da8xx_ops = {
> + .quirks = MUSB_INDEXED_EP,
> .init = da8xx_musb_init,
> .exit = da8xx_musb_exit,
>
> diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
> index d118729..40e9874 100644
> --- a/drivers/usb/musb/jz4740.c
> +++ b/drivers/usb/musb/jz4740.c
> @@ -106,6 +106,7 @@ static int jz4740_musb_exit(struct musb *musb)
> }
>
> static const struct musb_platform_ops jz4740_musb_ops = {
> + .quirks = MUSB_INDEXED_EP,
> .init = jz4740_musb_init,
> .exit = jz4740_musb_exit,
> };
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 2fbe149..48ddc82 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -229,6 +229,27 @@ static u32 musb_default_fifo_offset(u8 epnum)
> return 0x20 + (epnum * 4);
> }
>
> +/* "flat" mapping: each endpoint has its own i/o address */
> +static void musb_flat_ep_select(void __iomem *mbase, u8 epnum)
> +{
> +}
> +
> +static u32 musb_flat_ep_offset(u8 epnum, u16 offset)
> +{
> + return 0x100 + (0x10 * epnum) + offset;
> +}
> +
> +/* "indexed" mapping: INDEX register controls register bank select */
> +static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum)
> +{
> + musb_writeb(mbase, MUSB_INDEX, epnum);
> +}
> +
> +static u32 musb_indexed_ep_offset(u8 epnum, u16 offset)
> +{
> + return 0x10 + offset;
> +}
> +
> static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
> {
> return __raw_readb(addr + offset);
> @@ -1534,7 +1555,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
> }
> #endif
>
> - hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
> + hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
> hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
> hw_ep->rx_reinit = 1;
> hw_ep->tx_reinit = 1;
> @@ -2004,6 +2025,21 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
> if (musb->ops->quirks)
> musb->io.quirks = musb->ops->quirks;
>
> + /* At least tusb6010 has it's own offsets.. */
> + if (musb->ops->ep_offset)
> + musb->io.ep_offset = musb->ops->ep_offset;
> + if (musb->ops->ep_select)
> + musb->io.ep_select = musb->ops->ep_select;
> +
> + /* ..and some devices use indexed offset or flat offset */
> + if (musb->io.quirks & MUSB_INDEXED_EP) {
> + musb->io.ep_offset = musb_indexed_ep_offset;
> + musb->io.ep_select = musb_indexed_ep_select;
> + } else {
> + musb->io.ep_offset = musb_flat_ep_offset;
> + musb->io.ep_select = musb_flat_ep_select;
> + }
> +
> if (musb->ops->fifo_offset)
> musb->io.fifo_offset = musb->ops->fifo_offset;
> else
> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
> index 7c7f38c..02f62cb 100644
> --- a/drivers/usb/musb/musb_core.h
> +++ b/drivers/usb/musb/musb_core.h
> @@ -124,41 +124,6 @@ enum musb_g_ep0_state {
> #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
> #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
>
> -
> -/*************************** REGISTER ACCESS ********************************/
> -
> -/* Endpoint registers (other than dynfifo setup) can be accessed either
> - * directly with the "flat" model, or after setting up an index register.
> - */
> -
> -#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
> - || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
> - || defined(CONFIG_ARCH_OMAP4)
> -/* REVISIT indexed access seemed to
> - * misbehave (on DaVinci) for at least peripheral IN ...
> - */
> -#define MUSB_FLAT_REG
> -#endif
> -
> -/* TUSB mapping: "flat" plus ep0 special cases */
> -#if defined(CONFIG_USB_MUSB_TUSB6010) || \
> - defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
> -#define musb_ep_select(_mbase, _epnum) \
> - musb_writeb((_mbase), MUSB_INDEX, (_epnum))
> -#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
> -
> -/* "flat" mapping: each endpoint has its own i/o address */
> -#elif defined(MUSB_FLAT_REG)
> -#define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum)))
> -#define MUSB_EP_OFFSET MUSB_FLAT_OFFSET
> -
> -/* "indexed" mapping: INDEX register controls register bank select */
> -#else
> -#define musb_ep_select(_mbase, _epnum) \
> - musb_writeb((_mbase), MUSB_INDEX, (_epnum))
> -#define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET
> -#endif
> -
> /****************************** FUNCTIONS ********************************/
>
> #define MUSB_HST_MODE(_musb)\
> @@ -514,7 +479,7 @@ static inline int musb_read_fifosize(struct musb *musb,
> u8 reg = 0;
>
> /* read from core using indexed model */
> - reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
> + reg = musb_readb(mbase, musb->io.ep_offset(epnum, MUSB_FIFOSIZE));
> /* 0's returned when no more endpoints */
> if (!reg)
> return -ENODEV;
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 48bc09e..b7f2efc 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -636,6 +636,7 @@ static int dsps_musb_reset(struct musb *musb)
> }
>
> static struct musb_platform_ops dsps_ops = {
> + .quirks = MUSB_INDEXED_EP,
> .init = dsps_musb_init,
> .exit = dsps_musb_exit,
>
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index 14aa217..8a57a6f 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -37,6 +37,8 @@
>
> #include <linux/io.h>
>
> +#define musb_ep_select(_mbase, _epnum) musb->io.ep_select((_mbase), (_epnum))
> +
> /**
> * struct musb_io - IO functions for MUSB
> * @quirks: platform specific flags
> diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
> index b2b1f73..92b4c3d 100644
> --- a/drivers/usb/musb/musb_regs.h
> +++ b/drivers/usb/musb/musb_regs.h
> @@ -287,19 +287,8 @@
> #define MUSB_FIFOSIZE 0x0F
> #define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
>
> -/* Offsets to endpoint registers in indexed model (using INDEX register) */
> -#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
> - (0x10 + (_offset))
> -
> -/* Offsets to endpoint registers in flat models */
> -#define MUSB_FLAT_OFFSET(_epnum, _offset) \
> - (0x100 + (0x10*(_epnum)) + (_offset))
> -
> #if defined(CONFIG_USB_MUSB_TUSB6010) || \
> defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
> -/* TUSB6010 EP0 configuration register is special */
> -#define MUSB_TUSB_OFFSET(_epnum, _offset) \
> - (0x10 + _offset)
> #include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
> #endif
>
> diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> index e8e9f9a..ab7ec09 100644
> --- a/drivers/usb/musb/musbhsdma.c
> +++ b/drivers/usb/musb/musbhsdma.c
> @@ -195,6 +195,7 @@ static int dma_channel_abort(struct dma_channel *channel)
> {
> struct musb_dma_channel *musb_channel = channel->private_data;
> void __iomem *mbase = musb_channel->controller->base;
> + struct musb *musb = musb_channel->controller->private_data;
>
> u8 bchannel = musb_channel->idx;
> int offset;
> @@ -202,7 +203,7 @@ static int dma_channel_abort(struct dma_channel *channel)
>
> if (channel->status == MUSB_DMA_STATUS_BUSY) {
> if (musb_channel->transmit) {
> - offset = MUSB_EP_OFFSET(musb_channel->epnum,
> + offset = musb->io.ep_offset(musb_channel->epnum,
> MUSB_TXCSR);
>
> /*
> @@ -215,7 +216,7 @@ static int dma_channel_abort(struct dma_channel *channel)
> csr &= ~MUSB_TXCSR_DMAMODE;
> musb_writew(mbase, offset, csr);
> } else {
> - offset = MUSB_EP_OFFSET(musb_channel->epnum,
> + offset = musb->io.ep_offset(musb_channel->epnum,
> MUSB_RXCSR);
>
> csr = musb_readw(mbase, offset);
> @@ -326,7 +327,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
> (musb_channel->max_packet_sz - 1)))
> ) {
> u8 epnum = musb_channel->epnum;
> - int offset = MUSB_EP_OFFSET(epnum,
> + int offset = musb->io.ep_offset(epnum,
> MUSB_TXCSR);
> u16 txcsr;
>
> diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
> index 38efebc..fe69bad 100644
> --- a/drivers/usb/musb/tusb6010.c
> +++ b/drivers/usb/musb/tusb6010.c
> @@ -131,6 +131,17 @@ static u32 tusb_fifo_offset(u8 epnum)
> return 0x200 + (epnum * 0x20);
> }
>
> +static u32 tusb_ep_offset(u8 epnum, u16 offset)
> +{
> + return 0x10 + offset;
> +}
> +
> +/* TUSB mapping: "flat" plus ep0 special cases */
> +static void tusb_ep_select(void __iomem *mbase, u8 epnum)
> +{
> + musb_writeb(mbase, MUSB_INDEX, epnum);
> +}
> +
> /*
> * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
> */
> @@ -1174,6 +1185,8 @@ static const struct musb_platform_ops tusb_ops = {
> .init = tusb_musb_init,
> .exit = tusb_musb_exit,
>
> + .ep_offset = tusb_ep_offset,
> + .ep_select = tusb_ep_select,
> .fifo_offset = tusb_fifo_offset,
> .readb = tusb_readb,
> .writeb = tusb_writeb,
> diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
> index dc666e9..c170501 100644
> --- a/drivers/usb/musb/ux500.c
> +++ b/drivers/usb/musb/ux500.c
> @@ -188,6 +188,7 @@ static int ux500_musb_exit(struct musb *musb)
> }
>
> static const struct musb_platform_ops ux500_ops = {
> + .quirks = MUSB_INDEXED_EP,
> .init = ux500_musb_init,
> .exit = ux500_musb_exit,
>
> --
> 2.1.3
>
--
Apelete
next prev parent reply other threads:[~2014-11-24 23:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-24 19:04 [PATCH 0/8] Allow multiple MUSB glue layers to be built in Tony Lindgren
2014-11-24 19:05 ` [PATCH 2/8] usb: musb: Populate new IO functions for tusb6010 Tony Lindgren
2014-11-24 19:05 ` [PATCH 3/8] usb: musb: Populate new IO functions for blackfin Tony Lindgren
[not found] ` <1416855906-13931-1-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2014-11-24 19:04 ` [PATCH 1/8] usb: musb: Add function pointers for IO access functions Tony Lindgren
2014-11-24 19:05 ` [PATCH 4/8] usb: musb: Change to use new IO access Tony Lindgren
2014-11-24 19:12 ` Felipe Balbi
2014-11-24 19:26 ` Tony Lindgren
[not found] ` <1416855906-13931-5-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2014-11-25 9:46 ` Linus Walleij
2014-11-24 19:05 ` [PATCH 5/8] usb: musb: Change end point selection " Tony Lindgren
2014-11-24 23:38 ` Apelete Seketeli [this message]
2014-11-24 23:52 ` Tony Lindgren
2014-11-25 15:02 ` Lars-Peter Clausen
2014-11-28 13:50 ` Linus Walleij
2014-11-24 19:05 ` [PATCH 6/8] usb: musb: Pass fifo_mode in platform data Tony Lindgren
2014-11-24 23:40 ` Apelete Seketeli
2014-11-28 13:40 ` Linus Walleij
2014-11-24 19:05 ` [PATCH 7/8] usb: musb: Allow multiple glue layers to be built in Tony Lindgren
2014-11-24 19:05 ` [PATCH 8/8] usb: musb: Use IS_ENABLED for tusb6010 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141124233835.GB14728@tao \
--to=apelete@seketeli.net \
--cc=balbi@ti.com \
--cc=fabio.baltieri@linaro.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox