3.19-rc0: video stops working after update

Pavel Machek
2014-12-12T13:55:33Z

Hi!

After updating tree based on -pali to
2756d373a3f45a3a9ebf4ac389f9e0e02bd35a93 (and trimming down dts to
make it boot, as I'm still hiting dts size limit), video stops
working.

I also found this nastiness in dmesg:

Ideas welcome.

Best regards,
Pavel

[ 0.285583] Thumb binaries may crash randomly without this
workaround
[ 0.285644] RX-51: Registring OMAP3 HWRNG device
[ 0.290679] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.293182] In-band Error seen by MPU at address 0
[ 0.293243] ------------[ cut here ]------------
[ 0.293304] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166
omap3_l3_app_irq+0
xd4/0x124()
[ 0.293365] Modules linked in:
[ 0.293426] CPU: 0 PID: 1 Comm: swapper Not tainted
3.18.0-omap3-76150-g3d3c12d-dirty #737
[ 0.293487] Backtrace:
[ 0.293548] [<c0011630>] (dump_backtrace) from [<c00117cc>]
(show_stack+0x18/0x1c)
[ 0.293579] r6:c06cad30 r5:000000a6 r4:00000000 r3:00000000
[ 0.293670] [<c00117b4>] (show_stack) from [<c056f86c>]
(dump_stack+0x20/0x28)
[ 0.293731] [<c056f84c>] (dump_stack) from [<c0036f90>]
(warn_slowpath_common+0x7c/0xb4)
[ 0.293823] [<c0036f14>] (warn_slowpath_common) from [<c0036fec>]
(warn_slowpath_null+0x24/0x2c)
[ 0.293853] r8:00000013 r7:f8001400 r6:00000000 r5:00000000
r4:04001b00
[ 0.293945] [<c0036fc8>] (warn_slowpath_null) from [<c0225c84>]
(omap3_l3_app_irq+0xd4/0x124)
[ 0.294036] [<c0225bb0>] (omap3_l3_app_irq) from [<c00628dc>]
(handle_irq_event_percpu+0x54/0x164)
[ 0.294097] r7:00000000 r6:00000000 r5:cf89ec40 r4:cf89ec40
[ 0.294158] [<c0062888>] (handle_irq_event_percpu) from
[<c0062a44>] (handle_irq_event+0x58/0x8c)
[ 0.294219] r10:cf803200 r9:20000113 r8:0000000a r7:cf843ce0
r6:00000000 r5:cf89ec40
[ 0.294311] r4:cf8ed240
[ 0.294342] [<c00629ec>] (handle_irq_event) from [<c0065478>]
(handle_level_irq+0xdc/0x15c)
[ 0.294403] r5:00000000 r4:cf8ed240
[ 0.294464] [<c006539c>] (handle_level_irq) from [<c0062130>]
(generic_handle_irq+0x28/0x38)
[ 0.294494] r4:00000013 r3:c006539c
[ 0.294555] [<c0062108>] (generic_handle_irq) from [<c0062300>]
(__handle_domain_irq+0x68/0xc4)
[ 0.294616] r4:c07a9cf8 r3:00000103
[ 0.294677] [<c0062298>] (__handle_domain_irq) from [<c0008700>]
(omap_intc_handle_irq+0xbc/0xcc)
[ 0.294738] r10:60000113 r8:00000000 r7:c08d8700 r6:cf843ce0
r5:c07a9ed0 r4:0000000a
[ 0.294830] [<c0008644>] (omap_intc_handle_irq) from [<c0012280>]
(__irq_svc+0x40/0x74)
[ 0.294891] Exception stack(0xcf843ce0 to 0xcf843d28)
[ 0.294921] 3ce0: cf978600 c079fe88 00000001 00000000 cf978600
c079fe88 0000001c 00000000
[ 0.294982] 3d00: cf978634 20000113 60000113 cf843d54 cf843d28
cf843d28 c0063c50 c0063d2c
[ 0.295043] 3d20: 60000113 ffffffff
[ 0.295074] r8:cf978634 r7:cf843d14 r6:ffffffff r5:60000113
r4:c0063d2c r3:c0063c50
[ 0.295166] [<c0063990>] (__setup_irq) from [<c00640f0>]
(setup_irq+0x48/0x90)
[ 0.295227] r10:cf842000 r8:ffffffff r7:80000000 r6:c079fe88
r5:0000001c r4:cf978600
[ 0.295318] [<c00640a8>] (setup_irq) from [<c0031a98>]
(omap_system_dma_probe+0x214/0x2fc)
[ 0.295379] r6:0000001c r5:c07cb044 r4:00000020 r3:00000000
[ 0.295471] [<c0031884>] (omap_system_dma_probe) from [<c029aaac>]
(platform_drv_probe+0x50/0xac)
[ 0.295532] r10:cf842000 r9:00000000 r8:00000000 r7:c079fe44
r6:fffffdfb r5:cf985e10
[ 0.295593] r4:ffffffed
[ 0.295654] [<c029aa5c>] (platform_drv_probe) from [<c029934c>]
(driver_probe_device+0x10c/0x22c)
[ 0.295715] r7:c079fe44 r6:00000000 r5:cf985e10 r4:c08def30
[ 0.295776] [<c0299240>] (driver_probe_device) from [<c0299500>]
(__driver_attach+0x94/0x98)
[ 0.295837] r8:c07527f0 r7:00000000 r6:cf985e44 r5:c079fe44
r4:cf985e10 r3:00000000
[ 0.295928] [<c029946c>] (__driver_attach) from [<c02979c8>]
(bus_for_each_dev+0x5c/0x90)
[ 0.295989] r6:c029946c r5:c079fe44 r4:00000000 r3:00000000
[ 0.296081] [<c029796c>] (bus_for_each_dev) from [<c0298e48>]
(driver_attach+0x24/0x28)
[ 0.296112] r6:c07b0410 r5:cf881a80 r4:c079fe44
[ 0.296173] [<c0298e24>] (driver_attach) from [<c0298ac8>]
(bus_add_driver+0xdc/0x1d8)
[ 0.296264] [<c02989ec>] (bus_add_driver) from [<c0299bf0>]
(driver_register+0x80/0xfc)
[ 0.296295] r7:000000b8 r6:cf988580 r5:c0789be0 r4:c079fe44
[ 0.296386] [<c0299b70>] (driver_register) from [<c029a928>]
(__platform_driver_register+0x50/0x64)
[ 0.296447] r5:c0789be0 r4:c0789be0
[ 0.296508] [<c029a8d8>] (__platform_driver_register) from
[<c0752808>] (omap_system_dma_init+0x18/0x20)
[ 0.296569] [<c07527f0>] (omap_system_dma_init) from [<c0008998>]
(do_one_initcall+0x88/0x1cc)
[ 0.296661] [<c0008910>] (do_one_initcall) from [<c0744d94>]
(kernel_init_freeable+0xf0/0x1b8)
[ 0.296691] r10:c0773014 r9:c0772ffc r8:c07445ec r7:000000b8
r6:c07ca440 r5:00000003
[ 0.296783] r4:c077e570
[ 0.296844] [<c0744ca4>] (kernel_init_freeable) from [<c056b04c>]
(kernel_init+0x10/0xec)
[ 0.296874] r10:00000000 r9:00000000 r8:00000000 r7:00000000
r6:00000000 r5:c056b03c
[ 0.296966] r4:00000000
[ 0.296997] [<c056b03c>] (kernel_init) from [<c000ebd8>]
(ret_from_fork+0x14/0x3c)
[ 0.297058] r4:00000000 r3:00000000
[ 0.297149] ---[ end trace d174f22d07c1fabd ]---
[ 0.297241] Reserving DMA channels 0 and 1 for HS ROM code
[ 0.297302] OMAP DMA hardware revision 4.0
[ 0.445098] omap-dma-engine 48056000.dma-controller: OMAP DMA
engine driver
[ 0.452148] SCSI subsystem initialized

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html