From: Pavel Machek <pavel@ucw.cz>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>,
pali.rohar@gmail.com, sre@debian.org, sre@ring0.de,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com
Subject: Re: 3.19 on Nokia n900: audio quality awful
Date: Thu, 29 Jan 2015 21:42:18 +0100 [thread overview]
Message-ID: <20150129204218.GC3962@amd> (raw)
In-Reply-To: <54CA173F.1070301@ti.com>
Hi!
> >> I did this:
> >>
> >> I'm not sure which one is "main" microphone and which is headset, but
> >> I guess 2V should be "close enough" to 2.5V to produce something
> >> different from zeros..?
> >>
> > Main or integrated is digital microphone which does AD conversion itself
> > and headset is analogue. If DMIC is without bias codec will sample plain
> > zeros from DMIC input but analogue input should always produce some random
> > LSB bits from codec's AD converter.
> >
> > If codec produces zeros also from analogue input then I suppose codec
> > ADC is not powered up or similar. One way to hunt regression if
> > bisecting is not possible due reason or another is to dump and diff codec
> > registers from /sys/kernel/debug/regmap/ using both working commit
> >and head.
I tried 2.6.28... where recording was, but it does not support
regmap. Then I tried 3.14, but could not get recording to work there.
> >> tlv320aic3x_aux: tlv320aic3x@19 {
> >> @@ -502,6 +504,8 @@
> >> DRVDD-supply = <&vmmc2>;
> >> IOVDD-supply = <&vio>;
> >> DVDD-supply = <&vio>;
> >> +
> >> + ai3x-micbias-vg = <1>;
> >> };
> > This should be 2, i.e. 2.5 V according to
> > Documentation/devicetree/bindings/sound/tlv320aic3x.txt. I think 2 V is
> > too low for some headset mics and that was the reason for 2.5 V.
Ok, tried that, but no change.
> Can you also try this patch to correct the DAPM route for the rx51:
Yes, with the patch below (and dts updates I did) recording works.
Another interesting note is that audio quality is not that horrible
when playing 8 kHz, mono signal... it is mostly what I'd
expect. Playing 44.1kHz, stereo mp3 .. is not good.
Tested-by: Pavel Machek <pavel@ucw.cz>
Thanks,
Pavel
> diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> index 04896d6252a2..7f299357c2d2 100644
> --- a/sound/soc/omap/rx51.c
> +++ b/sound/soc/omap/rx51.c
> @@ -250,14 +250,14 @@ static const struct snd_soc_dapm_route audio_map[] = {
> {"FM Transmitter", NULL, "LLOUT"},
> {"FM Transmitter", NULL, "RLOUT"},
>
> - {"DMic Rate 64", NULL, "Mic Bias"},
> - {"Mic Bias", NULL, "DMic"},
> + {"DMic Rate 64", NULL, "DMic"},
> + {"DMic", NULL, "Mic Bias"},
>
> {"b LINE2R", NULL, "MONO_LOUT"},
> {"Earphone", NULL, "b HPLOUT"},
>
> - {"LINE1L", NULL, "b Mic Bias"},
> - {"b Mic Bias", NULL, "HS Mic"}
> + {"LINE1L", NULL, "HS Mic"},
> + {"HS Mic", NULL, "b Mic Bias"},
> };
>
> static const char * const spk_function[] = {"Off", "On"};
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-01-29 20:42 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-06 17:04 3.19 on Nokia n900: audio quality awful Pavel Machek
2015-01-06 17:25 ` Felipe Balbi
2015-01-06 17:51 ` Pavel Machek
2015-01-06 20:28 ` Felipe Balbi
2015-01-06 20:50 ` Pavel Machek
2015-01-06 20:54 ` Felipe Balbi
2015-01-06 21:57 ` Pavel Machek
2015-01-06 22:02 ` Felipe Balbi
2015-01-06 20:57 ` Aaro Koskinen
2015-01-06 22:08 ` Pavel Machek
2015-01-06 22:27 ` Aaro Koskinen
2015-01-06 22:46 ` Felipe Balbi
2015-01-06 22:52 ` Tony Lindgren
2015-01-06 22:56 ` Pavel Machek
2015-01-06 23:04 ` Felipe Balbi
2015-01-06 23:13 ` Pavel Machek
2015-01-06 23:29 ` Felipe Balbi
2015-01-06 22:58 ` Pavel Machek
2015-01-07 19:43 ` Aaro Koskinen
2015-01-06 20:39 ` Aaro Koskinen
2015-01-18 12:01 ` Pavel Machek
2015-01-26 13:20 ` Peter Ujfalusi
2015-01-28 18:15 ` Jarkko Nikula
2015-01-28 22:41 ` Pavel Machek
2015-01-29 7:35 ` Jarkko Nikula
2015-01-29 11:19 ` Peter Ujfalusi
2015-01-29 20:42 ` Pavel Machek [this message]
2015-01-30 8:16 ` Pali Rohár
2015-01-30 8:52 ` Pavel Machek
2015-01-30 10:26 ` Pavel Machek
2015-01-30 10:37 ` Pavel Machek
2015-01-30 12:40 ` Peter Ujfalusi
2015-01-30 12:43 ` Peter Ujfalusi
2015-01-28 22:02 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150129204218.GC3962@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=jarkko.nikula@bitmer.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=peter.ujfalusi@ti.com \
--cc=sre@debian.org \
--cc=sre@ring0.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).