* v3.19: Nokia N900 (qemu) - omap_aes error
@ 2015-01-31 15:29 Pali Rohár
2015-02-09 11:25 ` Pali Rohár
0 siblings, 1 reply; 4+ messages in thread
From: Pali Rohár @ 2015-01-31 15:29 UTC (permalink / raw)
To: linux-omap
Cc: linux-kernel, Pavel Machek, Sebastian Reichel, Aaro Koskinen,
Ivaylo Dimitrov, Tony Lindgren, Felipe Balbi, Nishanth Menon
[-- Attachment #1: Type: Text/Plain, Size: 3673 bytes --]
Hello,
when I enable problematic omap_aes.ko driver (also in DT) for
Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I
get this error message in dmesg at modprobe time:
[ 37.660339] ------------[ cut here ]------------
[ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
[ 37.668762] omap_hwmod: aes: idle state can only be entered
from enabled state
[ 37.672271] Modules linked in: omap_aes(+)
[ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0-
rc5+ #299
[ 37.679534] Hardware name: Nokia RX-51 board
[ 37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>]
(show_stack+0x10/0x14)
[ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
(warn_slowpath_common+0x84/0xac)
[ 37.690765] [<c0032194>] (warn_slowpath_common) from
[<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
[ 37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>]
(_idle+0x28/0x64)
[ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
(omap_hwmod_idle+0x30/0x78)
[ 37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>]
(omap_device_idle+0x48/0x6c)
[ 37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>]
(_od_runtime_suspend+0x1c/0x24)
[ 37.710723] [<c0022304>] (_od_runtime_suspend) from
[<c0269680>] (__rpm_callback+0x8c/0xdc)
[ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>]
(rpm_callback+0x70/0x88)
[ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>]
(rpm_suspend+0x2e8/0x5a4)
[ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>]
(__pm_runtime_idle+0x58/0x9c)
[ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>]
(omap_aes_probe+0x15c/0x448 [omap_aes])
[ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from
[<c0263d78>] (platform_drv_probe+0x48/0x90)
[ 37.740936] [<c0263d78>] (platform_drv_probe) from
[<c02624ec>] (really_probe+0xac/0x1e0)
[ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>]
(driver_probe_device+0x30/0x48)
[ 37.749847] [<c0262718>] (driver_probe_device) from
[<c0262790>] (__driver_attach+0x60/0x84)
[ 37.753601] [<c0262790>] (__driver_attach) from [<c0261070>]
(bus_for_each_dev+0x50/0x84)
[ 37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>]
(bus_add_driver+0xac/0x1bc)
[ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>]
(driver_register+0x9c/0xe0)
[ 37.765899] [<c02630c8>] (driver_register) from [<c0008798>]
(do_one_initcall+0x100/0x1b0)
[ 37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>]
(do_init_module+0x34/0x158)
[ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>]
(SyS_init_module+0x54/0x64)
[ 37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>]
(ret_fast_syscall+0x0/0x30)
[ 37.780975] ---[ end trace 86c3e025b92e700d ]---
[ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: 0.0
[ 37.789794] of_dma_request_slave_channel: dma-names property
of node '/ocp/aes@480c5000' missing or empty
[ 37.797668] omap-aes 480c5000.aes: Unable to request in DMA
channel
[ 37.801391] omap_aes_dma_init: error: -12
Error is not fatal, kernel does not crash and qemu emulation
working fine. But error is there.
I'm sure that qemu does not support omap aes hw emulation and so
I except error message about missing hw part (or something else).
But not above unwind_backtrace error message.
Any idea why it happens? It is probably not related to AES but to
DMA. It is for OMAP GP device (but emulated), so can TI comment
this problem (as this is not HS under NDA)?
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: v3.19: Nokia N900 (qemu) - omap_aes error
2015-01-31 15:29 v3.19: Nokia N900 (qemu) - omap_aes error Pali Rohár
@ 2015-02-09 11:25 ` Pali Rohár
2015-02-18 21:36 ` Pali Rohár
0 siblings, 1 reply; 4+ messages in thread
From: Pali Rohár @ 2015-02-09 11:25 UTC (permalink / raw)
To: linux-omap, Tony Lindgren
Cc: linux-kernel, Pavel Machek, Sebastian Reichel, Aaro Koskinen,
Ivaylo Dimitrov, Felipe Balbi, Nishanth Menon
[-- Attachment #1: Type: Text/Plain, Size: 4027 bytes --]
On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
> Hello,
>
> when I enable problematic omap_aes.ko driver (also in DT) for
> Nokia N900 machine in qemu (it emulates OMAP GP device, not
> HS) I get this error message in dmesg at modprobe time:
>
> [ 37.660339] ------------[ cut here ]------------
> [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
> omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
> [ 37.668762] omap_hwmod: aes: idle state can only be entered
> from enabled state
> [ 37.672271] Modules linked in: omap_aes(+)
> [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
> 3.19.0- rc5+ #299
> [ 37.679534] Hardware name: Nokia RX-51 board
> [ 37.683227] [<c0012678>] (unwind_backtrace) from
> [<c0010d44>] (show_stack+0x10/0x14)
> [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
> (warn_slowpath_common+0x84/0xac)
> [ 37.690765] [<c0032194>] (warn_slowpath_common) from
> [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
> [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from
> [<c0020cb0>] (_idle+0x28/0x64)
> [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
> (omap_hwmod_idle+0x30/0x78)
> [ 37.702636] [<c0021078>] (omap_hwmod_idle) from
> [<c00222c4>] (omap_device_idle+0x48/0x6c)
> [ 37.707153] [<c00222c4>] (omap_device_idle) from
> [<c0022304>] (_od_runtime_suspend+0x1c/0x24)
> [ 37.710723] [<c0022304>] (_od_runtime_suspend) from
> [<c0269680>] (__rpm_callback+0x8c/0xdc)
> [ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>]
> (rpm_callback+0x70/0x88)
> [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>]
> (rpm_suspend+0x2e8/0x5a4)
> [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>]
> (__pm_runtime_idle+0x58/0x9c)
> [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from
> [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
> [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from
> [<c0263d78>] (platform_drv_probe+0x48/0x90)
> [ 37.740936] [<c0263d78>] (platform_drv_probe) from
> [<c02624ec>] (really_probe+0xac/0x1e0)
> [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>]
> (driver_probe_device+0x30/0x48)
> [ 37.749847] [<c0262718>] (driver_probe_device) from
> [<c0262790>] (__driver_attach+0x60/0x84)
> [ 37.753601] [<c0262790>] (__driver_attach) from
> [<c0261070>] (bus_for_each_dev+0x50/0x84)
> [ 37.758422] [<c0261070>] (bus_for_each_dev) from
> [<c0261e20>] (bus_add_driver+0xac/0x1bc)
> [ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>]
> (driver_register+0x9c/0xe0)
> [ 37.765899] [<c02630c8>] (driver_register) from
> [<c0008798>] (do_one_initcall+0x100/0x1b0)
> [ 37.769653] [<c0008798>] (do_one_initcall) from
> [<c0085ca4>] (do_init_module+0x34/0x158)
> [ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>]
> (SyS_init_module+0x54/0x64)
> [ 37.777252] [<c00868d8>] (SyS_init_module) from
> [<c000dbe0>] (ret_fast_syscall+0x0/0x30)
> [ 37.780975] ---[ end trace 86c3e025b92e700d ]---
> [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev:
> 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names
> property of node '/ocp/aes@480c5000' missing or empty
> [ 37.797668] omap-aes 480c5000.aes: Unable to request in DMA
> channel
> [ 37.801391] omap_aes_dma_init: error: -12
>
> Error is not fatal, kernel does not crash and qemu emulation
> working fine. But error is there.
>
> I'm sure that qemu does not support omap aes hw emulation and
> so I except error message about missing hw part (or something
> else). But not above unwind_backtrace error message.
>
> Any idea why it happens? It is probably not related to AES but
> to DMA. It is for OMAP GP device (but emulated), so can TI
> comment this problem (as this is not HS under NDA)?
Hello,
what does that error line means?
[ 37.668762] omap_hwmod: aes: idle state can only be entered
from enabled state
Is not it bug in omap_hwmod.c code?
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: v3.19: Nokia N900 (qemu) - omap_aes error
2015-02-09 11:25 ` Pali Rohár
@ 2015-02-18 21:36 ` Pali Rohár
2015-02-19 23:45 ` Pali Rohár
0 siblings, 1 reply; 4+ messages in thread
From: Pali Rohár @ 2015-02-18 21:36 UTC (permalink / raw)
To: linux-omap
Cc: Tony Lindgren, linux-kernel, Pavel Machek, Sebastian Reichel,
Aaro Koskinen, Ivaylo Dimitrov, Felipe Balbi, Nishanth Menon
[-- Attachment #1: Type: Text/Plain, Size: 4473 bytes --]
On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
> On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
> > Hello,
> >
> > when I enable problematic omap_aes.ko driver (also in DT)
> > for Nokia N900 machine in qemu (it emulates OMAP GP device,
> > not HS) I get this error message in dmesg at modprobe time:
> >
> > [ 37.660339] ------------[ cut here ]------------
> > [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
> > omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
> > [ 37.668762] omap_hwmod: aes: idle state can only be
> > entered from enabled state
> > [ 37.672271] Modules linked in: omap_aes(+)
> > [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
> > 3.19.0- rc5+ #299
> > [ 37.679534] Hardware name: Nokia RX-51 board
> > [ 37.683227] [<c0012678>] (unwind_backtrace) from
> > [<c0010d44>] (show_stack+0x10/0x14)
> > [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
> > (warn_slowpath_common+0x84/0xac)
> > [ 37.690765] [<c0032194>] (warn_slowpath_common) from
> > [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
> > [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from
> > [<c0020cb0>] (_idle+0x28/0x64)
> > [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
> > (omap_hwmod_idle+0x30/0x78)
> > [ 37.702636] [<c0021078>] (omap_hwmod_idle) from
> > [<c00222c4>] (omap_device_idle+0x48/0x6c)
> > [ 37.707153] [<c00222c4>] (omap_device_idle) from
> > [<c0022304>] (_od_runtime_suspend+0x1c/0x24)
> > [ 37.710723] [<c0022304>] (_od_runtime_suspend) from
> > [<c0269680>] (__rpm_callback+0x8c/0xdc)
> > [ 37.714385] [<c0269680>] (__rpm_callback) from
> > [<c0269740>] (rpm_callback+0x70/0x88)
> > [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>]
> > (rpm_suspend+0x2e8/0x5a4)
> > [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>]
> > (__pm_runtime_idle+0x58/0x9c)
> > [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from
> > [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
> > [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from
> > [<c0263d78>] (platform_drv_probe+0x48/0x90)
> > [ 37.740936] [<c0263d78>] (platform_drv_probe) from
> > [<c02624ec>] (really_probe+0xac/0x1e0)
> > [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>]
> > (driver_probe_device+0x30/0x48)
> > [ 37.749847] [<c0262718>] (driver_probe_device) from
> > [<c0262790>] (__driver_attach+0x60/0x84)
> > [ 37.753601] [<c0262790>] (__driver_attach) from
> > [<c0261070>] (bus_for_each_dev+0x50/0x84)
> > [ 37.758422] [<c0261070>] (bus_for_each_dev) from
> > [<c0261e20>] (bus_add_driver+0xac/0x1bc)
> > [ 37.762207] [<c0261e20>] (bus_add_driver) from
> > [<c02630c8>] (driver_register+0x9c/0xe0)
> > [ 37.765899] [<c02630c8>] (driver_register) from
> > [<c0008798>] (do_one_initcall+0x100/0x1b0)
> > [ 37.769653] [<c0008798>] (do_one_initcall) from
> > [<c0085ca4>] (do_init_module+0x34/0x158)
> > [ 37.773590] [<c0085ca4>] (do_init_module) from
> > [<c00868d8>] (SyS_init_module+0x54/0x64)
> > [ 37.777252] [<c00868d8>] (SyS_init_module) from
> > [<c000dbe0>] (ret_fast_syscall+0x0/0x30)
> > [ 37.780975] ---[ end trace 86c3e025b92e700d ]---
> > [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev:
> > 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names
> > property of node '/ocp/aes@480c5000' missing or empty
> > [ 37.797668] omap-aes 480c5000.aes: Unable to request in
> > DMA channel
> > [ 37.801391] omap_aes_dma_init: error: -12
> >
> > Error is not fatal, kernel does not crash and qemu emulation
> > working fine. But error is there.
> >
> > I'm sure that qemu does not support omap aes hw emulation
> > and so I except error message about missing hw part (or
> > something else). But not above unwind_backtrace error
> > message.
> >
> > Any idea why it happens? It is probably not related to AES
> > but to DMA. It is for OMAP GP device (but emulated), so can
> > TI comment this problem (as this is not HS under NDA)?
>
> Hello,
>
> what does that error line means?
>
> [ 37.668762] omap_hwmod: aes: idle state can only be entered
> from enabled state
>
> Is not it bug in omap_hwmod.c code?
In qemu dmesg log I see this debug line:
[ 0.297851] omap_hwmod: aes: cannot be enabled for reset (3)
So aes is in disabled state.
Should not omap-aes driver check for aes state if is enabled?
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: v3.19: Nokia N900 (qemu) - omap_aes error
2015-02-18 21:36 ` Pali Rohár
@ 2015-02-19 23:45 ` Pali Rohár
0 siblings, 0 replies; 4+ messages in thread
From: Pali Rohár @ 2015-02-19 23:45 UTC (permalink / raw)
To: linux-omap
Cc: Tony Lindgren, linux-kernel, Pavel Machek, Sebastian Reichel,
Aaro Koskinen, Ivaylo Dimitrov, Felipe Balbi, Nishanth Menon
[-- Attachment #1: Type: Text/Plain, Size: 4874 bytes --]
On Wednesday 18 February 2015 22:36:41 Pali Rohár wrote:
> On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
> > On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
> > > Hello,
> > >
> > > when I enable problematic omap_aes.ko driver (also in DT)
> > > for Nokia N900 machine in qemu (it emulates OMAP GP
> > > device, not HS) I get this error message in dmesg at
> > > modprobe time:
> > >
> > > [ 37.660339] ------------[ cut here ]------------
> > > [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
> > > omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
> > > [ 37.668762] omap_hwmod: aes: idle state can only be
> > > entered from enabled state
> > > [ 37.672271] Modules linked in: omap_aes(+)
> > > [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
> > > 3.19.0- rc5+ #299
> > > [ 37.679534] Hardware name: Nokia RX-51 board
> > > [ 37.683227] [<c0012678>] (unwind_backtrace) from
> > > [<c0010d44>] (show_stack+0x10/0x14)
> > > [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
> > > (warn_slowpath_common+0x84/0xac)
> > > [ 37.690765] [<c0032194>] (warn_slowpath_common) from
> > > [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
> > > [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from
> > > [<c0020cb0>] (_idle+0x28/0x64)
> > > [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
> > > (omap_hwmod_idle+0x30/0x78)
> > > [ 37.702636] [<c0021078>] (omap_hwmod_idle) from
> > > [<c00222c4>] (omap_device_idle+0x48/0x6c)
> > > [ 37.707153] [<c00222c4>] (omap_device_idle) from
> > > [<c0022304>] (_od_runtime_suspend+0x1c/0x24)
> > > [ 37.710723] [<c0022304>] (_od_runtime_suspend) from
> > > [<c0269680>] (__rpm_callback+0x8c/0xdc)
> > > [ 37.714385] [<c0269680>] (__rpm_callback) from
> > > [<c0269740>] (rpm_callback+0x70/0x88)
> > > [ 37.717987] [<c0269740>] (rpm_callback) from
> > > [<c0269f74>] (rpm_suspend+0x2e8/0x5a4)
> > > [ 37.721710] [<c0269f74>] (rpm_suspend) from
> > > [<c026a6ec>] (__pm_runtime_idle+0x58/0x9c)
> > > [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from
> > > [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
> > > [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes])
> > > from [<c0263d78>] (platform_drv_probe+0x48/0x90)
> > > [ 37.740936] [<c0263d78>] (platform_drv_probe) from
> > > [<c02624ec>] (really_probe+0xac/0x1e0)
> > > [ 37.745025] [<c02624ec>] (really_probe) from
> > > [<c0262718>] (driver_probe_device+0x30/0x48)
> > > [ 37.749847] [<c0262718>] (driver_probe_device) from
> > > [<c0262790>] (__driver_attach+0x60/0x84)
> > > [ 37.753601] [<c0262790>] (__driver_attach) from
> > > [<c0261070>] (bus_for_each_dev+0x50/0x84)
> > > [ 37.758422] [<c0261070>] (bus_for_each_dev) from
> > > [<c0261e20>] (bus_add_driver+0xac/0x1bc)
> > > [ 37.762207] [<c0261e20>] (bus_add_driver) from
> > > [<c02630c8>] (driver_register+0x9c/0xe0)
> > > [ 37.765899] [<c02630c8>] (driver_register) from
> > > [<c0008798>] (do_one_initcall+0x100/0x1b0)
> > > [ 37.769653] [<c0008798>] (do_one_initcall) from
> > > [<c0085ca4>] (do_init_module+0x34/0x158)
> > > [ 37.773590] [<c0085ca4>] (do_init_module) from
> > > [<c00868d8>] (SyS_init_module+0x54/0x64)
> > > [ 37.777252] [<c00868d8>] (SyS_init_module) from
> > > [<c000dbe0>] (ret_fast_syscall+0x0/0x30)
> > > [ 37.780975] ---[ end trace 86c3e025b92e700d ]---
> > > [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel
> > > rev: 0.0 [ 37.789794] of_dma_request_slave_channel:
> > > dma-names property of node '/ocp/aes@480c5000' missing or
> > > empty [ 37.797668] omap-aes 480c5000.aes: Unable to
> > > request in DMA channel
> > > [ 37.801391] omap_aes_dma_init: error: -12
> > >
> > > Error is not fatal, kernel does not crash and qemu
> > > emulation working fine. But error is there.
> > >
> > > I'm sure that qemu does not support omap aes hw emulation
> > > and so I except error message about missing hw part (or
> > > something else). But not above unwind_backtrace error
> > > message.
> > >
> > > Any idea why it happens? It is probably not related to AES
> > > but to DMA. It is for OMAP GP device (but emulated), so
> > > can TI comment this problem (as this is not HS under
> > > NDA)?
> >
> > Hello,
> >
> > what does that error line means?
> >
> > [ 37.668762] omap_hwmod: aes: idle state can only be
> > entered from enabled state
> >
> > Is not it bug in omap_hwmod.c code?
>
> In qemu dmesg log I see this debug line:
>
> [ 0.297851] omap_hwmod: aes: cannot be enabled for reset
> (3)
>
> So aes is in disabled state.
>
> Should not omap-aes driver check for aes state if is enabled?
Above dmesg error should be fixed by my patch sent to ML:
ARM: OMAP2+: Return correct error values from device and hwmod
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-02-19 23:45 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-31 15:29 v3.19: Nokia N900 (qemu) - omap_aes error Pali Rohár
2015-02-09 11:25 ` Pali Rohár
2015-02-18 21:36 ` Pali Rohár
2015-02-19 23:45 ` Pali Rohár
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).