From: "Pali Rohár" <pali.rohar@gmail.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: Robert Nelson <robertcnelson@gmail.com>,
Tony Lindgren <tony@atomide.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
Pavel Machek <pavel@ucw.cz>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: ARM errata 430973 on multi platform kernels (was: OMAP3-N900: Add microphone bias voltages)
Date: Sun, 5 Apr 2015 15:52:10 +0200 [thread overview]
Message-ID: <201504051552.10522@pali> (raw)
In-Reply-To: <20150405134528.GD9186@earth>
[-- Attachment #1: Type: Text/Plain, Size: 1851 bytes --]
On Sunday 05 April 2015 15:45:28 Sebastian Reichel wrote:
> Hi,
>
> On Sun, Apr 05, 2015 at 03:26:14PM +0200, Pali Rohár wrote:
> > > > > Yes so it seems, and the bootloaders should really set
> > > > > it. It's also disabled for multiplatform builds.
> > > >
> > > > These are now done in u-boot as of: v2015.04-rc4
> > > >
> > > > http://git.denx.de/?p=u-boot.git;a=commit;h=c6f90e1418a8
> > > > 4fe5 fa463b38403bd1845cb6a59c
> > >
> > > Seems like "include/configs/nokia_rx51.h" has been
> > > forgotten. Note, that the kernel must still be able to
> > > enable the bit itself (in case NOLO is used without
> > > u-boot).
> >
> > You must not expect that bootloader set something. Nokia
> > N900 has closed and signed bootloader which cannot be
> > easily replaced and or fixed.
> >
> > For N900 there is U-Boot but it does not support lot of
> > things (load kernel via usb or serial) so for developers it
> > is better to use original Nokia bootloader.
>
> Yes, I'm aware of that. I think having the IBE bit set in
> u-boot has advantages nevertheless. I think the kernel can't
> enable the bit sufficiently early if its compiled in
> thumb-mode itself (CONFIG_THUMB2_KERNEL).
>
> So I suggest to enable the IBE bit in the kernel (that part is
> already done) *and* in u-boot.
>
> -- Sebastian
Yes. Code for both (U-Boot and linux kernel) exists and are
already included.
In linux kernel code is since 3.14-rc6 and in U-Boot code is
there since beginning of Nokia N900 support (2013.04) directly in
board code.
I believe that you guys do not remove or break that code :-)
Nokia N900 needs slightly different code for setting IBE bit as
other omap3 boards. For info is in commit message of commit
4748a7240284b0f68bd47a66365c2cd561939830.
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2015-04-05 13:52 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-01 19:07 [PATCH RESEND] ARM: dts: OMAP3-N900: Add microphone bias voltages Jarkko Nikula
2015-03-30 16:30 ` Jarkko Nikula
[not found] ` <55197A12.1050009-FVTvWyuFUl3QT0dZR+AlfA@public.gmane.org>
2015-03-30 16:42 ` Tony Lindgren
2015-03-30 17:45 ` Jarkko Nikula
[not found] ` <55198BA4.5010207-FVTvWyuFUl3QT0dZR+AlfA@public.gmane.org>
2015-03-30 17:50 ` Tony Lindgren
2015-03-31 12:32 ` Sebastian Reichel
2015-04-01 19:47 ` Tony Lindgren
2015-04-03 16:35 ` ARM errata 430973 on multi platform kernels (was: OMAP3-N900: Add microphone bias voltages) Sebastian Reichel
2015-04-03 18:39 ` Tony Lindgren
2015-04-03 19:21 ` Robert Nelson
2015-04-05 13:00 ` Sebastian Reichel
2015-04-05 13:26 ` Pali Rohár
2015-04-05 13:45 ` Sebastian Reichel
2015-04-05 13:52 ` Pali Rohár [this message]
2015-04-06 17:38 ` Sebastian Reichel
2015-04-03 20:42 ` Pavel Machek
2015-04-03 22:08 ` ARM errata 430973 on multi platform kernels Ivaylo Dimitrov
2015-04-03 22:15 ` Tony Lindgren
2015-04-03 22:47 ` Ivaylo Dimitrov
2015-04-03 22:52 ` Tony Lindgren
2015-04-05 4:13 ` Matthijs van Duin
2015-04-05 7:23 ` Ivaylo Dimitrov
2015-04-05 16:50 ` Matthijs van Duin
2015-04-05 16:52 ` Matthijs van Duin
2015-04-05 21:08 ` Ivaylo Dimitrov
2015-04-05 23:52 ` Matthijs van Duin
2015-04-06 15:19 ` Tony Lindgren
2015-04-06 15:40 ` Tony Lindgren
2015-04-06 17:14 ` Ivaylo Dimitrov
2015-04-06 17:42 ` Tony Lindgren
2015-04-06 18:14 ` Matthijs van Duin
2015-04-07 2:23 ` Tony Lindgren
2015-04-07 3:12 ` Sebastian Reichel
2015-04-07 3:49 ` Matthijs van Duin
2015-04-07 14:48 ` Tony Lindgren
2015-04-09 22:37 ` Grazvydas Ignotas
2015-04-09 22:44 ` Tony Lindgren
2015-04-09 23:44 ` Nishanth Menon
2015-04-10 22:05 ` Grazvydas Ignotas
2015-04-10 23:08 ` Tony Lindgren
2015-04-16 16:53 ` Matthijs van Duin
2015-04-07 13:58 ` Russell King - ARM Linux
2015-04-07 13:57 ` Russell King - ARM Linux
2015-04-07 15:22 ` Tony Lindgren
2015-04-07 15:44 ` Tony Lindgren
2015-04-08 23:08 ` Russell King - ARM Linux
2015-04-08 23:15 ` Tony Lindgren
2015-04-08 23:06 ` Russell King - ARM Linux
2015-04-09 13:48 ` Russell King - ARM Linux
2015-04-09 15:09 ` Tony Lindgren
2015-04-09 15:30 ` Russell King - ARM Linux
2015-04-15 16:31 ` Sebastian Reichel
2015-04-16 16:08 ` Tony Lindgren
2015-04-17 18:41 ` Sebastian Reichel
2015-04-20 23:40 ` Tony Lindgren
2015-04-23 10:25 ` Russell King - ARM Linux
2015-04-23 14:17 ` Tony Lindgren
2015-04-28 18:13 ` Russell King - ARM Linux
2015-04-29 14:40 ` Tony Lindgren
2015-05-04 14:24 ` Tony Lindgren
2015-04-24 8:54 ` Matthijs van Duin
2015-04-28 18:11 ` Russell King - ARM Linux
2015-05-02 6:51 ` Matthijs van Duin
2015-04-05 13:39 ` Sebastian Reichel
2015-04-06 15:24 ` Tony Lindgren
2015-05-04 16:07 ` [PATCH RESEND] ARM: dts: OMAP3-N900: Add microphone bias voltages Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201504051552.10522@pali \
--to=pali.rohar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robertcnelson@gmail.com \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).