From: Peter Chen <peter.chen@freescale.com>
To: Roger Quadros <rogerq@ti.com>
Cc: gregkh@linuxfoundation.org, balbi@ti.com,
stern@rowland.harvard.edu, dan.j.williams@intel.com,
jun.li@freescale.com, mathias.nyman@linux.intel.com,
tony@atomide.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [RFC][PATCH v2 02/13] usb: otg-fsm: support multiple instances
Date: Thu, 16 Apr 2015 19:36:01 +0800 [thread overview]
Message-ID: <20150416113559.GB3181@shlinux2> (raw)
In-Reply-To: <1429008120-5395-3-git-send-email-rogerq@ti.com>
On Tue, Apr 14, 2015 at 01:41:49PM +0300, Roger Quadros wrote:
> Move the state_changed variable into struct otg_fsm
> so that we can support multiple instances.
OTG device has only one port. See 3.1.1.
If you go to pass OTG Certification, the lab requires that there is only
one port at your board.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/usb/common/usb-otg-fsm.c | 10 ++++------
> include/linux/usb/otg-fsm.h | 1 +
> 2 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
> index 1736bbe..0caa37b 100644
> --- a/drivers/usb/common/usb-otg-fsm.c
> +++ b/drivers/usb/common/usb-otg-fsm.c
> @@ -61,8 +61,6 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
> return 0;
> }
>
> -static int state_changed;
> -
> /* Called when leaving a state. Do state clean up jobs here */
> static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> {
> @@ -123,7 +121,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> /* Called when entering a state */
> static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
> {
> - state_changed = 1;
> + fsm->state_changed = 1;
> if (fsm->otg->state == new_state)
> return 0;
> VDBG("Set state: %s\n", usb_otg_state_string(new_state));
> @@ -255,7 +253,7 @@ int otg_statemachine(struct otg_fsm *fsm)
> mutex_lock(&fsm->lock);
>
> state = fsm->otg->state;
> - state_changed = 0;
> + fsm->state_changed = 0;
> /* State machine state change judgement */
>
> switch (state) {
> @@ -368,7 +366,7 @@ int otg_statemachine(struct otg_fsm *fsm)
> }
> mutex_unlock(&fsm->lock);
>
> - VDBG("quit statemachine, changed = %d\n", state_changed);
> - return state_changed;
> + VDBG("quit statemachine, changed = %d\n", fsm->state_changed);
> + return fsm->state_changed;
> }
> EXPORT_SYMBOL_GPL(otg_statemachine);
> diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
> index c5b74c5..85a9150 100644
> --- a/include/linux/usb/otg-fsm.h
> +++ b/include/linux/usb/otg-fsm.h
> @@ -183,6 +183,7 @@ struct otg_fsm {
> /* Current usb protocol used: 0:undefine; 1:host; 2:client */
> int protocol;
> struct mutex lock;
> + bool state_changed;
> };
>
> struct otg_fsm_ops {
> --
> 2.1.0
>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-04-16 11:38 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 10:41 [RFC][PATCH v2 00/13] USB: OTG/DRD Core functionality Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 01/13] usb: otg-fsm: Add documentation for struct otg_fsm Roger Quadros
2015-04-16 11:32 ` Peter Chen
2015-04-17 8:45 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 03/13] usb: otg-fsm: Prevent build warning "VDBG" redefined Roger Quadros
[not found] ` <1429008120-5395-4-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-16 11:41 ` Peter Chen
2015-04-16 11:59 ` Roger Quadros
[not found] ` <552FA410.4030508-l0cyMroinI0@public.gmane.org>
2015-04-16 12:07 ` Peter Chen
2015-04-14 10:41 ` [RFC][PATCH v2 05/13] usb: otg: add OTG core Roger Quadros
2015-04-15 9:29 ` Paul Bolle
2015-04-15 13:24 ` Roger Quadros
2015-04-16 12:02 ` Peter Chen
2015-04-16 13:04 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 07/13] usb: otg: Add dual-role device (DRD) support Roger Quadros
[not found] ` <1429008120-5395-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-14 10:41 ` [RFC][PATCH v2 02/13] usb: otg-fsm: support multiple instances Roger Quadros
2015-04-16 11:36 ` Peter Chen [this message]
2015-04-16 11:58 ` Roger Quadros
2015-04-16 12:06 ` Peter Chen
2015-04-14 10:41 ` [RFC][PATCH v2 04/13] usb: gadget: add usb_gadget_start/stop() Roger Quadros
[not found] ` <1429008120-5395-5-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-16 11:48 ` Peter Chen
2015-04-16 12:07 ` Roger Quadros
[not found] ` <552FA60D.5030707-l0cyMroinI0@public.gmane.org>
2015-04-16 12:12 ` Peter Chen
2015-04-14 10:41 ` [RFC][PATCH v2 06/13] usb: hcd: Add hcd add/remove functions for OTG use Roger Quadros
2015-04-17 2:18 ` Peter Chen
2015-04-17 7:21 ` Roger Quadros
2015-04-17 14:03 ` Alan Stern
2015-04-20 7:00 ` Roger Quadros
2015-04-20 13:56 ` Alan Stern
2015-04-21 7:02 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 08/13] usb: otg: hub: Notify OTG fsm when A device sets b_hnp_enable Roger Quadros
2015-04-17 2:28 ` Peter Chen
2015-04-17 7:32 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 09/13] usb: gadget: udc: adapt to OTG Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 10/13] udc-core: fix lock circular dependency on udc_lock Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 11/13] usb: add "dual-role" mode to dr_mode device tree helper Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 12/13] usb: dwc3: add dual-role support Roger Quadros
2015-04-14 10:42 ` [RFC][PATCH v2 13/13] ARM: dts: dra7x-evm: Enable dual-role for usb1 Roger Quadros
2015-04-20 3:05 ` [RFC][PATCH v2 00/13] USB: OTG/DRD Core functionality Peter Chen
2015-04-20 7:28 ` Roger Quadros
[not found] ` <5534AA8C.1070400-l0cyMroinI0@public.gmane.org>
2015-04-21 6:04 ` Peter Chen
2015-04-21 7:34 ` Roger Quadros
2015-04-22 2:17 ` Peter Chen
2015-04-22 7:33 ` Roger Quadros
2015-04-22 9:22 ` Peter Chen
2015-04-22 12:42 ` Roger Quadros
2015-04-23 1:52 ` Peter Chen
2015-04-23 6:35 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150416113559.GB3181@shlinux2 \
--to=peter.chen@freescale.com \
--cc=balbi@ti.com \
--cc=dan.j.williams@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=rogerq@ti.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).