From: Peter Chen <peter.chen@freescale.com>
To: Roger Quadros <rogerq@ti.com>
Cc: gregkh@linuxfoundation.org, balbi@ti.com,
stern@rowland.harvard.edu, dan.j.williams@intel.com,
jun.li@freescale.com, mathias.nyman@linux.intel.com,
tony@atomide.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [RFC][PATCH v2 02/13] usb: otg-fsm: support multiple instances
Date: Thu, 16 Apr 2015 20:06:02 +0800 [thread overview]
Message-ID: <20150416120602.GF3181@shlinux2> (raw)
In-Reply-To: <552FA3DC.90709@ti.com>
On Thu, Apr 16, 2015 at 02:58:20PM +0300, Roger Quadros wrote:
> On 16/04/15 14:36, Peter Chen wrote:
> > On Tue, Apr 14, 2015 at 01:41:49PM +0300, Roger Quadros wrote:
> >> Move the state_changed variable into struct otg_fsm
> >> so that we can support multiple instances.
> >
> > OTG device has only one port. See 3.1.1.
> > If you go to pass OTG Certification, the lab requires that there is only
> > one port at your board.
> >
>
> We're not breaking OTG compliance by this ;).
> Moreover this structure is not limited to OTG but for DRD (dual-role) use as well.
> We can have multiple DRD ports per board.
>
Ok, the code is ok for keeping multiple instances.
Peter
>
> >>
> >> Signed-off-by: Roger Quadros <rogerq@ti.com>
> >> ---
> >> drivers/usb/common/usb-otg-fsm.c | 10 ++++------
> >> include/linux/usb/otg-fsm.h | 1 +
> >> 2 files changed, 5 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
> >> index 1736bbe..0caa37b 100644
> >> --- a/drivers/usb/common/usb-otg-fsm.c
> >> +++ b/drivers/usb/common/usb-otg-fsm.c
> >> @@ -61,8 +61,6 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
> >> return 0;
> >> }
> >>
> >> -static int state_changed;
> >> -
> >> /* Called when leaving a state. Do state clean up jobs here */
> >> static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> >> {
> >> @@ -123,7 +121,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
> >> /* Called when entering a state */
> >> static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
> >> {
> >> - state_changed = 1;
> >> + fsm->state_changed = 1;
> >> if (fsm->otg->state == new_state)
> >> return 0;
> >> VDBG("Set state: %s\n", usb_otg_state_string(new_state));
> >> @@ -255,7 +253,7 @@ int otg_statemachine(struct otg_fsm *fsm)
> >> mutex_lock(&fsm->lock);
> >>
> >> state = fsm->otg->state;
> >> - state_changed = 0;
> >> + fsm->state_changed = 0;
> >> /* State machine state change judgement */
> >>
> >> switch (state) {
> >> @@ -368,7 +366,7 @@ int otg_statemachine(struct otg_fsm *fsm)
> >> }
> >> mutex_unlock(&fsm->lock);
> >>
> >> - VDBG("quit statemachine, changed = %d\n", state_changed);
> >> - return state_changed;
> >> + VDBG("quit statemachine, changed = %d\n", fsm->state_changed);
> >> + return fsm->state_changed;
> >> }
> >> EXPORT_SYMBOL_GPL(otg_statemachine);
> >> diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
> >> index c5b74c5..85a9150 100644
> >> --- a/include/linux/usb/otg-fsm.h
> >> +++ b/include/linux/usb/otg-fsm.h
> >> @@ -183,6 +183,7 @@ struct otg_fsm {
> >> /* Current usb protocol used: 0:undefine; 1:host; 2:client */
> >> int protocol;
> >> struct mutex lock;
> >> + bool state_changed;
> >> };
> >>
> >> struct otg_fsm_ops {
> >> --
> >> 2.1.0
> >>
> >
>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-04-16 12:08 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 10:41 [RFC][PATCH v2 00/13] USB: OTG/DRD Core functionality Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 01/13] usb: otg-fsm: Add documentation for struct otg_fsm Roger Quadros
2015-04-16 11:32 ` Peter Chen
2015-04-17 8:45 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 03/13] usb: otg-fsm: Prevent build warning "VDBG" redefined Roger Quadros
[not found] ` <1429008120-5395-4-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-16 11:41 ` Peter Chen
2015-04-16 11:59 ` Roger Quadros
[not found] ` <552FA410.4030508-l0cyMroinI0@public.gmane.org>
2015-04-16 12:07 ` Peter Chen
2015-04-14 10:41 ` [RFC][PATCH v2 05/13] usb: otg: add OTG core Roger Quadros
2015-04-15 9:29 ` Paul Bolle
2015-04-15 13:24 ` Roger Quadros
2015-04-16 12:02 ` Peter Chen
2015-04-16 13:04 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 07/13] usb: otg: Add dual-role device (DRD) support Roger Quadros
[not found] ` <1429008120-5395-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-14 10:41 ` [RFC][PATCH v2 02/13] usb: otg-fsm: support multiple instances Roger Quadros
2015-04-16 11:36 ` Peter Chen
2015-04-16 11:58 ` Roger Quadros
2015-04-16 12:06 ` Peter Chen [this message]
2015-04-14 10:41 ` [RFC][PATCH v2 04/13] usb: gadget: add usb_gadget_start/stop() Roger Quadros
[not found] ` <1429008120-5395-5-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-04-16 11:48 ` Peter Chen
2015-04-16 12:07 ` Roger Quadros
[not found] ` <552FA60D.5030707-l0cyMroinI0@public.gmane.org>
2015-04-16 12:12 ` Peter Chen
2015-04-14 10:41 ` [RFC][PATCH v2 06/13] usb: hcd: Add hcd add/remove functions for OTG use Roger Quadros
2015-04-17 2:18 ` Peter Chen
2015-04-17 7:21 ` Roger Quadros
2015-04-17 14:03 ` Alan Stern
2015-04-20 7:00 ` Roger Quadros
2015-04-20 13:56 ` Alan Stern
2015-04-21 7:02 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 08/13] usb: otg: hub: Notify OTG fsm when A device sets b_hnp_enable Roger Quadros
2015-04-17 2:28 ` Peter Chen
2015-04-17 7:32 ` Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 09/13] usb: gadget: udc: adapt to OTG Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 10/13] udc-core: fix lock circular dependency on udc_lock Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 11/13] usb: add "dual-role" mode to dr_mode device tree helper Roger Quadros
2015-04-14 10:41 ` [RFC][PATCH v2 12/13] usb: dwc3: add dual-role support Roger Quadros
2015-04-14 10:42 ` [RFC][PATCH v2 13/13] ARM: dts: dra7x-evm: Enable dual-role for usb1 Roger Quadros
2015-04-20 3:05 ` [RFC][PATCH v2 00/13] USB: OTG/DRD Core functionality Peter Chen
2015-04-20 7:28 ` Roger Quadros
[not found] ` <5534AA8C.1070400-l0cyMroinI0@public.gmane.org>
2015-04-21 6:04 ` Peter Chen
2015-04-21 7:34 ` Roger Quadros
2015-04-22 2:17 ` Peter Chen
2015-04-22 7:33 ` Roger Quadros
2015-04-22 9:22 ` Peter Chen
2015-04-22 12:42 ` Roger Quadros
2015-04-23 1:52 ` Peter Chen
2015-04-23 6:35 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150416120602.GF3181@shlinux2 \
--to=peter.chen@freescale.com \
--cc=balbi@ti.com \
--cc=dan.j.williams@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=rogerq@ti.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).