From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pali =?utf-8?B?Um9ow6Fy?= Subject: Re: n900 in 4.2-rc0: repeating oopses Date: Tue, 30 Jun 2015 11:53:10 +0200 Message-ID: <20150630095310.GF27720@pali> References: <20150416093234.GA17423@amd> <20150629091146.GA5103@amd> <20150630092404.GA19285@amd> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <20150630092404.GA19285@amd> Sender: linux-kernel-owner@vger.kernel.org To: Pavel Machek Cc: sre@debian.org, sre@ring0.de, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com List-Id: linux-omap@vger.kernel.org On Tuesday 30 June 2015 11:24:04 Pavel Machek wrote: > Hi! >=20 > > Just tried booting 4.2-rc0 on n900 (commit > > 4a10a91756ef381bced7b88cfb9232f660b92d93) and it is broken. Previou= s > > -rc0 version worked. This time, there's some output on console, but > > too fast for me to read. > >=20 > > It seems oopses happen before mounting root. If you have serial > > console, they should be easy to see. >=20 > I tried again according to pali's instructions, and it is still > broken the same way. Any other ideas? Does it work for you? >=20 > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.d= tsi > index 69a40cf..ff6f2bf 100644 > --- a/arch/arm/boot/dts/omap3.dtsi > +++ b/arch/arm/boot/dts/omap3.dtsi > @@ -570,6 +570,7 @@ > interrupts =3D <49>; > dmas =3D <&sdma 69>; > dma-names =3D "rx"; > + status =3D "disabled"; > }; > =20 > smartreflex_core: smartreflex@480cb000 { >=20 > Pavel >=20 Ok, then it is not problem with omap crypto and HS device... I will try 4.2 at the end of week. --=20 Pali Roh=C3=A1r pali.rohar@gmail.com